All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rodolfo Giometti <giometti@linux.it>
To: linux-mips@linux-mips.org
Subject: [PATCH] Power management support for OHCI on au1x00
Date: Tue, 23 May 2006 18:47:03 +0200	[thread overview]
Message-ID: <20060523164703.GD28124@enneenne.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 453 bytes --]

Hello,

here:

   http://ftp.enneenne.com/pub/misc/au1100-patches/linux/patch-ohci_au1xxx_pm_support

and attached my patch for power management support for OHCI on au1x00.

Ciao,

Rodolfo

-- 

GNU/Linux Solutions                  e-mail:    giometti@enneenne.com
Linux Device Driver                             giometti@gnudd.com
Embedded Systems                     		giometti@linux.it
UNIX programming                     phone:     +39 349 2432127

[-- Attachment #2: patch-ohci_au1xxx_pm_support --]
[-- Type: text/plain, Size: 4405 bytes --]

diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index a1c8b3b..ed4f783 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -14,6 +14,8 @@
  *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
  * Modified for AMD Alchemy Au1xxx
  *  by Matt Porter <mporter@kernel.crashing.org>
+ * Modified to add PM support
+ *  by Rodolfo Giometti <giometti@linux.it> on May 2006
  *
  * This file is licenced under the GPL.
  */
@@ -229,6 +231,15 @@ static void usb_ohci_au1xxx_remove(struc
 
 /*-------------------------------------------------------------------------*/
 
+static int
+ohci_au1xxx_reset (struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+	ohci_hcd_init (ohci);
+	return ohci_init (ohci);
+}
+
 static int __devinit
 ohci_au1xxx_start (struct usb_hcd *hcd)
 {
@@ -249,6 +260,37 @@ ohci_au1xxx_start (struct usb_hcd *hcd)
 	return 0;
 }
 
+#ifdef	CONFIG_PM
+static int ohci_au1xxx_suspend (struct usb_hcd *hcd, pm_message_t message)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	unsigned long	flags;
+	int		rc = 0;
+
+	spin_lock_irqsave (&ohci->lock, flags);
+	if (hcd->state != HC_STATE_SUSPENDED) {
+		rc = -EINVAL;
+		goto exit;
+	}
+	ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+	(void)ohci_readl(ohci, &ohci->regs->intrdisable);
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+exit:
+	spin_unlock_irqrestore (&ohci->lock, flags);
+
+	return rc;
+}
+
+static int ohci_au1xxx_resume (struct usb_hcd *hcd)
+{
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	usb_hcd_resume_root_hub(hcd);
+	return 0;
+}
+#endif	/* CONFIG_PM */
+
+
 /*-------------------------------------------------------------------------*/
 
 static const struct hc_driver ohci_au1xxx_hc_driver = {
@@ -265,11 +307,12 @@ static const struct hc_driver ohci_au1xx
 	/*
 	 * basic lifecycle operations
 	 */
+	.reset =		ohci_au1xxx_reset,
 	.start =		ohci_au1xxx_start,
-#ifdef	CONFIG_PM
-	/* suspend:		ohci_au1xxx_suspend,  -- tbd */
-	/* resume:		ohci_au1xxx_resume,   -- tbd */
-#endif /*CONFIG_PM*/
+#ifdef  CONFIG_PM
+	.suspend =		ohci_au1xxx_suspend,
+	.resume =		ohci_au1xxx_resume,
+#endif
 	.stop =			ohci_stop,
 
 	/*
@@ -318,26 +361,77 @@ static int ohci_hcd_au1xxx_drv_remove(st
 	usb_ohci_au1xxx_remove(hcd, pdev);
 	return 0;
 }
-	/*TBD*/
-/*static int ohci_hcd_au1xxx_drv_suspend(struct platform_device *dev)
+
+#ifdef CONFIG_PM
+static int ohci_hcd_au1xxx_drv_suspend(struct platform_device *pdev, pm_message_t state)
 {
-	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	int ret = 0;
 
-	return 0;
+	if (hcd->self.root_hub->dev.power.power_state.event == PM_EVENT_ON)
+		return -EBUSY;
+
+	if (hcd->driver->suspend) {
+		ret = hcd->driver->suspend(hcd, state);
+		suspend_report_result(hcd->driver->suspend, ret);
+		if (ret)
+			goto done;
+	}
+	synchronize_irq(dev->irq);
+
+	if (hcd->state == HC_STATE_SUSPENDED)
+		au1xxx_stop_ohc(pdev);
+	else {
+		dev_dbg (hcd->self.controller, "hcd state %d; not suspended\n",
+			hcd->state);
+		WARN_ON(1);
+		ret = -EINVAL;
+	}
+
+done:
+	if (ret == 0)
+		pdev->dev.power.power_state = PMSG_SUSPEND;
+
+	return ret;
 }
-static int ohci_hcd_au1xxx_drv_resume(struct platform_device *dev)
+
+static int ohci_hcd_au1xxx_drv_resume(struct platform_device *pdev)
 {
-	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	int ret = 0;
 
-	return 0;
+	if (hcd->state != HC_STATE_SUSPENDED) {
+		dev_dbg (hcd->self.controller,
+				"can't resume, not suspended!\n");
+		return 0;
+	}
+
+	au1xxx_start_ohc(pdev);
+
+	pdev->dev.power.power_state = PMSG_ON;
+
+	clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+	if (hcd->driver->resume) {
+		ret = hcd->driver->resume(hcd);
+			if (ret) {
+				dev_err (hcd->self.controller,
+					"hcd post-resume error %d!\n", ret);
+	                        usb_hc_died (hcd);
+                }
+	}
+
+	return ret;
 }
-*/
+#endif
 
 static struct platform_driver ohci_hcd_au1xxx_driver = {
 	.probe		= ohci_hcd_au1xxx_drv_probe,
 	.remove		= ohci_hcd_au1xxx_drv_remove,
-	/*.suspend	= ohci_hcd_au1xxx_drv_suspend, */
-	/*.resume	= ohci_hcd_au1xxx_drv_resume, */
+#ifdef CONFIG_PM
+	.suspend	= ohci_hcd_au1xxx_drv_suspend,
+	.resume		= ohci_hcd_au1xxx_drv_resume,
+#endif
 	.driver		= {
 		.name	= "au1xxx-ohci",
 		.owner	= THIS_MODULE,

                 reply	other threads:[~2006-05-23 16:46 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060523164703.GD28124@enneenne.com \
    --to=giometti@linux.it \
    --cc=linux-mips@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.