From: Aron Griffis <aron@hp.com>
To: xen-devel@lists.xensource.com
Subject: Re: [PATCH] take a bite out of xen-mkbuildtree-pre
Date: Wed, 24 May 2006 21:37:07 -0400 [thread overview]
Message-ID: <20060525013707.GF13661@olive.flatmonk> (raw)
In-Reply-To: <20060524235813.GC13661@olive.flatmonk>
This version is slightly better. It keeps some pollution out of
.config if CONFIG_XEN=n. Otherwise it's just a repost of the previous
patch...
This patch takes a bite out of xen-mkbuildtree-pre, which needs to
disappear eventually for inclusion of xen-ia64 in Fedora. Probably
these config settings will disappear when the ia64 p2m/vp conversion
is complete, but for the moment it's a clean way of handling the two
personalities of xen-ia64.
This is sent to xen-devel because it's primarily common code that's
changing.
Signed-off-by: Aron Griffis <aron@hp.com>
# HG changeset patch
# User agriffis@cougar.zko.hp.com
# Node ID daa8345dbe73c5c02c1167fffbc902229f746baa
# Parent 35f2341bfac8bb74ad2ca7e7f71f6c0663bb3e36
Converge the ia64-specific and general versions of xen/drivers/Makefile and
xen/drivers/core/Makefile. Use Kconfig settings instead to control whether
specific pieces are built. This takes a bite out of xen-mkbuildtree-pre, which
needs to disappear eventually for distro inclusion.
diff -r 35f2341bfac8 -r daa8345dbe73 linux-2.6-xen-sparse/arch/ia64/Kconfig
--- a/linux-2.6-xen-sparse/arch/ia64/Kconfig Wed May 24 09:59:04 2006 -0600
+++ b/linux-2.6-xen-sparse/arch/ia64/Kconfig Wed May 24 21:42:02 2006 -0400
@@ -73,7 +73,7 @@ config XEN_IA64_DOM0_VP
config XEN_IA64_DOM0_NON_VP
bool
- depends on !(XEN && XEN_IA64_DOM0_VP)
+ depends on XEN && !XEN_IA64_DOM0_VP
default y
help
dom0 P=M model
@@ -496,15 +496,33 @@ source "security/Kconfig"
source "crypto/Kconfig"
+#
# override default values of drivers/xen/Kconfig
-if !XEN_IA64_DOM0_VP
+#
+if XEN
+config XEN_UTIL
+ default n if XEN_IA64_DOM0_VP
+
config HAVE_ARCH_ALLOC_SKB
- bool
- default n
+ default n if !XEN_IA64_DOM0_VP
config HAVE_ARCH_DEV_ALLOC_SKB
- bool
- default n
+ default n if !XEN_IA64_DOM0_VP
+
+config XEN_NETUTIL
+ default n if !XEN_IA64_DOM0_VP
+
+config XEN_BALLOON
+ default n if !XEN_IA64_DOM0_VP
+
+config XEN_SKBUFF
+ default n if !XEN_IA64_DOM0_VP
+
+config XEN_CHAR
+ default n
+
+config XEN_REBOOT
+ default n
endif
source "drivers/xen/Kconfig"
diff -r 35f2341bfac8 -r daa8345dbe73 linux-2.6-xen-sparse/arch/ia64/xen-mkbuildtree-pre
--- a/linux-2.6-xen-sparse/arch/ia64/xen-mkbuildtree-pre Wed May 24 09:59:04 2006 -0600
+++ b/linux-2.6-xen-sparse/arch/ia64/xen-mkbuildtree-pre Wed May 24 21:42:02 2006 -0400
@@ -9,12 +9,6 @@
#eventually asm-xsi-offsets needs to be part of hypervisor.h/hypercall.h
ln -sf ../../../../xen/include/asm-ia64/asm-xsi-offsets.h include/asm-ia64/xen/
-
-#ia64 drivers/xen isn't fully functional yet, workaround...
-#also ignore core/evtchn.c which uses a different irq mechanism than ia64
-#(warning: there be dragons here if these files diverge)
-ln -sf ../../arch/ia64/xen/drivers/Makefile drivers/xen/Makefile
-ln -sf ../../../arch/ia64/xen/drivers/coreMakefile drivers/xen/core/Makefile
#not sure where these ia64-specific files will end up in the future
ln -sf ../../../arch/ia64/xen/drivers/xenia64_init.c drivers/xen/core
diff -r 35f2341bfac8 -r daa8345dbe73 linux-2.6-xen-sparse/drivers/xen/Kconfig
--- a/linux-2.6-xen-sparse/drivers/xen/Kconfig Wed May 24 09:59:04 2006 -0600
+++ b/linux-2.6-xen-sparse/drivers/xen/Kconfig Wed May 24 21:42:02 2006 -0400
@@ -228,4 +228,29 @@ config NO_IDLE_HZ
bool
default y
+config XEN_UTIL
+ bool
+ default y
+
+config XEN_NETUTIL
+ bool
+ default y
+
+config XEN_BALLOON
+ bool
+ default y
+
+config XEN_CHAR
+ bool
+ default y
+
+config XEN_SKBUFF
+ bool
+ default y
+ depends on NET
+
+config XEN_REBOOT
+ bool
+ default y
+
endif
diff -r 35f2341bfac8 -r daa8345dbe73 linux-2.6-xen-sparse/drivers/xen/Makefile
--- a/linux-2.6-xen-sparse/drivers/xen/Makefile Wed May 24 09:59:04 2006 -0600
+++ b/linux-2.6-xen-sparse/drivers/xen/Makefile Wed May 24 21:42:02 2006 -0400
@@ -1,15 +1,13 @@
-
-obj-y += net_driver_util.o
-obj-y += util.o
-
obj-y += core/
-obj-y += char/
obj-y += console/
obj-y += evtchn/
-obj-y += balloon/
obj-y += privcmd/
obj-y += xenbus/
+obj-$(CONFIG_XEN_UTIL) += util.o
+obj-$(CONFIG_XEN_NETUTIL) += net_driver_util.o
+obj-$(CONFIG_XEN_BALLOON) += balloon/
+obj-$(CONFIG_XEN_CHAR) += char/
obj-$(CONFIG_XEN_BLKDEV_BACKEND) += blkback/
obj-$(CONFIG_XEN_NETDEV_BACKEND) += netback/
obj-$(CONFIG_XEN_TPMDEV_BACKEND) += tpmback/
diff -r 35f2341bfac8 -r daa8345dbe73 linux-2.6-xen-sparse/drivers/xen/core/Makefile
--- a/linux-2.6-xen-sparse/drivers/xen/core/Makefile Wed May 24 09:59:04 2006 -0600
+++ b/linux-2.6-xen-sparse/drivers/xen/core/Makefile Wed May 24 21:42:02 2006 -0400
@@ -2,10 +2,12 @@
# Makefile for the linux kernel.
#
-obj-y := evtchn.o reboot.o gnttab.o features.o
+obj-y := evtchn.o gnttab.o features.o
-obj-$(CONFIG_PROC_FS) += xen_proc.o
-obj-$(CONFIG_NET) += skbuff.o
-obj-$(CONFIG_SMP) += smpboot.o
-obj-$(CONFIG_SYSFS) += hypervisor_sysfs.o
+obj-$(CONFIG_PROC_FS) += xen_proc.o
+obj-$(CONFIG_SYSFS) += hypervisor_sysfs.o
obj-$(CONFIG_XEN_SYSFS) += xen_sysfs.o
+obj-$(CONFIG_IA64) += xenia64_init.o
+obj-$(CONFIG_XEN_SKBUFF) += skbuff.o
+obj-$(CONFIG_XEN_REBOOT) += reboot.o
+obj-$(CONFIG_XEN_SMPBOOT) += smpboot.o
next prev parent reply other threads:[~2006-05-25 1:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-24 23:58 [PATCH] take a bite out of xen-mkbuildtree-pre Aron Griffis
2006-05-25 1:37 ` Aron Griffis [this message]
2006-05-25 5:20 ` Alex Williamson
2006-05-25 6:51 ` Keir Fraser
2006-05-25 18:34 ` Aron Griffis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060525013707.GF13661@olive.flatmonk \
--to=aron@hp.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.