[PATCH 1/4] [IrDA] *_DONGLE should depend on IRTTY_SIR

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Samuel Ortiz <samuel@sortiz.org>
To: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, irda-users@lists.sourceforge.net
Subject: [PATCH 1/4] [IrDA] *_DONGLE should depend on IRTTY_SIR
Date: Thu, 25 May 2006 06:18:51 +0000	[thread overview]
Message-ID: <20060525061851.GA24611@sortiz.org> (raw)

If a SIR dongle is built in the kernel while IRTTY_SIR is built
as a module, kernel compilation will fail.
Thus, the SIR dongle config should depend on the IRTTY_SIR.

Closes kernel bug# 6512
(http://bugzilla.kernel.org/show_bug.cgi?id=6512)

Signed-off-by: Samuel Ortiz <samuel@sortiz.org>


---

 drivers/net/irda/Kconfig |   20 ++++++++++----------
 1 files changed, 10 insertions(+), 10 deletions(-)

cf17d65eca0463ff3e078fab4db2caac57f5fa46
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 5e6d007..cff8598 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -33,7 +33,7 @@ config DONGLE
 
 config ESI_DONGLE
 	tristate "ESI JetEye PC dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Extended Systems
 	  JetEye PC dongle.  To compile it as a module, choose M here. The ESI
@@ -44,7 +44,7 @@ config ESI_DONGLE
 
 config ACTISYS_DONGLE
 	tristate "ACTiSYS IR-220L and IR220L+ dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-220L and
 	  IR220L+ dongles.  To compile it as a module, choose M here. The
@@ -55,7 +55,7 @@ config ACTISYS_DONGLE
 
 config TEKRAM_DONGLE
 	tristate "Tekram IrMate 210B dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Tekram IrMate 210B
 	  dongle.  To compile it as a module, choose M here. The Tekram dongle
@@ -66,7 +66,7 @@ config TEKRAM_DONGLE
 
 config TOIM3232_DONGLE
 	tristate "TOIM3232 IrDa dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Vishay/Temic
 	  TOIM3232 and TOIM4232 based dongles.
@@ -74,7 +74,7 @@ config TOIM3232_DONGLE
 
 config LITELINK_DONGLE
 	tristate "Parallax LiteLink dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Parallax Litelink
 	  dongle.  To compile it as a module, choose M here.  The Parallax
@@ -85,7 +85,7 @@ config LITELINK_DONGLE
 
 config MA600_DONGLE
 	tristate "Mobile Action MA600 dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Mobile Action MA600
 	  dongle.  To compile it as a module, choose M here. The MA600 dongle
@@ -98,7 +98,7 @@ config MA600_DONGLE
 
 config GIRBIL_DONGLE
 	tristate "Greenwich GIrBIL dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Greenwich GIrBIL
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -109,7 +109,7 @@ config GIRBIL_DONGLE
 
 config MCP2120_DONGLE
 	tristate "Microchip MCP2120"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Microchip MCP2120
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -123,7 +123,7 @@ config MCP2120_DONGLE
 
 config OLD_BELKIN_DONGLE
 	tristate "Old Belkin dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Adaptec Airport 1000
 	  and 2000 dongles.  If you want to compile it as a module, choose
@@ -132,7 +132,7 @@ config OLD_BELKIN_DONGLE
 
 config ACT200L_DONGLE
 	tristate "ACTiSYS IR-200L dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-200L
 	  dongle. If you want to compile it as a module, choose M here.
-- 
1.3.2

next             reply	other threads:[~2006-05-24 23:08 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-05-25  6:18 Samuel Ortiz [this message]
2006-05-25 23:18 ` [PATCH 1/4] [IrDA] *_DONGLE should depend on IRTTY_SIR David Miller

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:5e6d007 dfblob:cff8598 )
 OR (
bs:"[PATCH 1/4] [IrDA] *_DONGLE should depend on IRTTY_SIR" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060525061851.GA24611@sortiz.org \
    --to=samuel@sortiz.org \
    --cc=davem@davemloft.net \
    --cc=irda-users@lists.sourceforge.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.