Re: CRC16 in rt2x00

[Ivo van Doorn <ivdoorn@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 2791 bytes --]

On Saturday 27 May 2006 15:55, Sergey Vlasov wrote:
> On Sat, 27 May 2006 13:27:15 +0200 Ivo van Doorn wrote:
> 
> > I have a small question about the CRC16 usage in rt2x00
> > and what the netdev preferred method is for this.
> > 
> > At the moment the rt2x00 drivers in wireless-dev use
> > its own CRC16 table and calculation inside the driver.
> > There already is a CRC16 library in the kernel
> > which uses the 0x8005 table, while rt2x00 uses the
> > 0x1021 polynomial table.
> > 
> > Is keeping this version of CRC16 inside rt2x00 the most
> > sensible thing to do? Or should it be moved to the lib
> > folder of the kernel so other drivers could make use of it as well?
> > (So far I have not found a driver which makes use
> > of the same CRC16 table)
> 
> However, fs/udf/crc.c has exactly the same CRC table as rt2x00:
> 
> static uint16_t crc_table[256] = {
>         0x0000U, 0x1021U, 0x2042U, 0x3063U, 0x4084U, 0x50a5U, 0x60c6U, 0x70e7U,
> ...
>         0x6e17U, 0x7e36U, 0x4e55U, 0x5e74U, 0x2e93U, 0x3eb2U, 0x0ed1U, 0x1ef0U
> };
> 
> /*      
>  * udf_crc
>  *      
>  * PURPOSE
>  *      Calculate a 16-bit CRC checksum using ITU-T V.41 polynomial.
>  *      
>  * DESCRIPTION
>  *      The OSTA-UDF(tm) 1.50 standard states that using CRCs is mandatory.
>  *      The polynomial used is: x^16 + x^12 + x^15 + 1
>  *
>  * PRE-CONDITIONS
>  *      data            Pointer to the data block.
>  *      size            Size of the data block.
>  *
>  * POST-CONDITIONS
>  *      <return>        CRC of the data block.
>  *
>  * HISTORY
>  *      July 21, 1997 - Andrew E. Mileski
>  *      Adapted from OSTA-UDF(tm) 1.50 standard.
>  */
> 
> This is a bit-reversed form of CRC-CCITT supported by lib/crc-ccitt.c.
> Unfortunately, this does not help much, because converting one form to
> the other is too expensive (you would need to reverse bits in all data
> bytes, and then reverse bits in the 16-bit result).
> 
> BTW, there is more CRC code duplication in drivers/bluetooth/hci_bcsp.c
> (bcsp_crc_update() seems to give the same result as crc_ccitt_byte()).
> 
> In drivers/media/dvb/frontends/nxt200x.c, nxt200x_crc() seems to give
> the same result as rt2x00crc_byte() (but without using a table).
> 
> drivers/net/wan/cycx_drv.c:checksum() is also some mutated version of
> CRC-CCITT (adding two additional zero bytes at the end of data makes it
> return the same result as rt2x00crc()).

Interesting, so it would actually be usefull to move the nxt200x crc16 implemetation
into the crc16 library (Is not using a table preferred over using a table?)
And make rt2x00 and fs/udf/crc.c make use of this library?

And perhaps hci_bcsp could be updated to use crc_ccitt_byte() instead?

Regards,

ivo

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]