From: Borislav Petkov <bbpetkov@yahoo.de>
To: linux-ide@vger.kernel.org
Cc: jgarzik@pobox.com
Subject: [PATCH 1/n] libata-core.c conversion to new debugging scheme, part 1 (25% done)
Date: Wed, 31 May 2006 07:46:33 +0200 [thread overview]
Message-ID: <20060531054633.GA4875@zmei.tnic> (raw)
This patch converts the first 25% of libata-core.c to the new debugging scheme.
Signed-off-by: <petkov@uni-muenster.de>
--- libata-dev/drivers/scsi/libata-core.c.orig 2006-05-30 22:02:51.000000000 +0200
+++ libata-dev/drivers/scsi/libata-core.c 2006-05-31 07:37:44.000000000 +0200
@@ -411,7 +411,7 @@ static const char *sata_spd_string(unsig
void ata_dev_disable(struct ata_device *dev)
{
- if (ata_dev_enabled(dev)) {
+ if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) {
ata_dev_printk(dev, KERN_WARNING, "disabled\n");
dev->class++;
}
@@ -770,8 +770,12 @@ void ata_std_dev_select (struct ata_port
void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep)
{
- VPRINTK("ENTER, ata%u: device %u, wait %u\n",
- ap->id, device, wait);
+ if (ata_msg_probe(ap)) {
+ struct ata_device *dev = container_of(&ap, struct ata_device, ap);
+ ata_dev_printk(dev, KERN_INFO, "ata_dev_select: ENTER, ata%u: "
+ "device %u, wait %u\n",
+ ap->id, device, wait);
+ }
if (wait)
ata_wait_idle(ap);
@@ -1297,18 +1301,21 @@ static int ata_dev_configure(struct ata_
unsigned int xfer_mask;
int i, rc;
- if (!ata_dev_enabled(dev)) {
- DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n",
- ap->id, dev->devno);
+ if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
+ ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n",
+ __FUNCTION__, ap->id, dev->devno);
return 0;
}
- DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno);
+ if (ata_msg_probe(ap))
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n",
+ __FUNCTION__, ap->id, dev->devno);
/* print device capabilities */
- if (print_info)
- ata_dev_printk(dev, KERN_DEBUG, "cfg 49:%04x 82:%04x 83:%04x "
+ if (ata_msg_probe(ap))
+ ata_dev_printk(dev, KERN_DEBUG, "%s: cfg 49:%04x 82:%04x 83:%04x "
"84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n",
+ __FUNCTION__,
id[49], id[82], id[83], id[84],
id[85], id[86], id[87], id[88]);
@@ -1328,7 +1335,8 @@ static int ata_dev_configure(struct ata_
/* find max transfer mode; for printk only */
xfer_mask = ata_id_xfermask(id);
- ata_dump_id(id);
+ if (ata_msg_probe(ap))
+ ata_dump_id(id);
/* ATA-specific feature tests */
if (dev->class == ATA_DEV_ATA) {
@@ -1349,7 +1357,7 @@ static int ata_dev_configure(struct ata_
ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
/* print device info to dmesg */
- if (print_info)
+ if (ata_msg_info(ap))
ata_dev_printk(dev, KERN_INFO, "ATA-%d, "
"max %s, %Lu sectors: %s %s\n",
ata_id_major_version(id),
@@ -1372,7 +1380,7 @@ static int ata_dev_configure(struct ata_
}
/* print device info to dmesg */
- if (print_info)
+ if (ata_msg_info(ap))
ata_dev_printk(dev, KERN_INFO, "ATA-%d, "
"max %s, %Lu sectors: CHS %u/%u/%u\n",
ata_id_major_version(id),
@@ -1383,7 +1391,8 @@ static int ata_dev_configure(struct ata_
if (dev->id[59] & 0x100) {
dev->multi_count = dev->id[59] & 0xff;
- DPRINTK("ata%u: dev %u multi count %u\n",
+ if (ata_msg_info(ap))
+ ata_dev_printk(dev, KERN_INFO, "ata%u: dev %u multi count %u\n",
ap->id, dev->devno, dev->multi_count);
}
@@ -1396,8 +1405,9 @@ static int ata_dev_configure(struct ata_
rc = atapi_cdb_len(id);
if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
- ata_dev_printk(dev, KERN_WARNING,
- "unsupported CDB len\n");
+ if (ata_msg_warn(ap))
+ ata_dev_printk(dev, KERN_WARNING,
+ "unsupported CDB len\n");
rc = -EINVAL;
goto err_out_nosup;
}
@@ -1409,7 +1419,7 @@ static int ata_dev_configure(struct ata_
}
/* print device info to dmesg */
- if (print_info)
+ if (ata_msg_info(ap))
ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n",
ata_mode_string(xfer_mask),
cdb_intr_string);
@@ -1423,7 +1433,7 @@ static int ata_dev_configure(struct ata_
/* limit bridge transfers to udma5, 200 sectors */
if (ata_dev_knobble(dev)) {
- if (print_info)
+ if (ata_msg_info(ap))
ata_dev_printk(dev, KERN_INFO,
"applying bridge limits\n");
dev->udma_mask &= ATA_UDMA5;
@@ -1433,11 +1443,15 @@ static int ata_dev_configure(struct ata_
if (ap->ops->dev_config)
ap->ops->dev_config(ap, dev);
- DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap));
+ if (ata_msg_probe(ap))
+ ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n",
+ __FUNCTION__, ata_chk_status(ap));
return 0;
err_out_nosup:
- DPRINTK("EXIT, err\n");
+ if (ata_msg_probe(ap))
+ ata_dev_printk(dev, KERN_DEBUG,
+ "%s: EXIT, err\n", __FUNCTION__);
return rc;
}
@@ -1478,8 +1492,9 @@ static int ata_bus_probe(struct ata_port
if (ap->ops->probe_reset) {
rc = ap->ops->probe_reset(ap, classes);
if (rc) {
- ata_port_printk(ap, KERN_ERR,
- "reset failed (errno=%d)\n", rc);
+ if (ata_msg_err(ap))
+ ata_port_printk(ap, KERN_ERR,
+ "reset failed (errno=%d)\n", rc);
return rc;
}
} else {
___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de
next reply other threads:[~2006-05-31 5:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-31 5:46 Borislav Petkov [this message]
2006-05-31 6:39 ` [PATCH 1/n] libata-core.c conversion to new debugging scheme, part 1 (25% done) Jeff Garzik
2006-06-01 5:38 ` Borislav Petkov
2006-06-01 6:09 ` Tejun Heo
2006-06-01 6:14 ` Jeff Garzik
2006-06-02 7:32 ` Borislav Petkov
2006-06-01 6:44 ` Borislav Petkov
2006-06-12 3:11 ` Jeff Garzik
2006-06-12 3:48 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060531054633.GA4875@zmei.tnic \
--to=bbpetkov@yahoo.de \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.