From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <20060531170736.25650@gmx.net> MIME-Version: 1.0 Date: Wed, 31 May 2006 19:07:36 +0200 From: pea sen To: bluez-users@lists.sourceforge.net Subject: [Bluez-users] sdpd not working on arm based linux Reply-To: BlueZ users List-Id: BlueZ users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Sender: bluez-users-bounces@lists.sourceforge.net Errors-To: bluez-users-bounces@lists.sourceforge.net hello, we`re trying to integrate bluez into an arm-based embedded-linux. = we crosscompiled the bluez-libs and utils. everything works fine: hciconfig, hcitool, sdptool are working correctly. But when we try to start sdp-server "sdpd", nothing is done. no errormsg an= d "ps" does not list sdpd-process. typing "sdptool browse local" result following errormsg: Failed to connect to SDP server on FF:FF:FF:00:00:00: Address family not su= pported by protocol we're not sure if we did everything right, but other bluez-tools working...= so what can be there? what is missing? what does sdpd need to work and why= is no output-message there? All hints are usefull -- = Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal f=FCr Modem und ISDN: http://www.gmx.net/de/go/smartsurfer = _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users