All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pavel Machek <pavel@ucw.cz>
To: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: linux-kernel@vger.kernel.org, linux-net@vger.kernel.org
Subject: Re: [PATCH] pcnet32 driver NAPI support
Date: Thu, 8 Jun 2006 10:03:03 +0200	[thread overview]
Message-ID: <20060608080253.GA20601@elf.ucw.cz> (raw)
In-Reply-To: <20060607165225.GB7859@csclub.uwaterloo.ca>

Hi!

> I have made a diff against 2.6.16.20 and 2.6.17-rc6.
> 
> Comments would be very welcome.
> 
> Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
> 
> Len Sorensen

> diff -ruN linux-2.6.16.20/drivers/net/Kconfig linux-2.6.16.20.pcnet32napi/drivers/net/Kconfig
> --- linux-2.6.16.20/drivers/net/Kconfig	2006-06-05 13:18:23.000000000 -0400
> +++ linux-2.6.16.20.pcnet32napi/drivers/net/Kconfig	2006-06-07 11:19:54.000000000 -0400
> @@ -1272,6 +1272,23 @@
>  	  <file:Documentation/networking/net-modules.txt>. The module
>  	  will be called pcnet32.
>  
> +config PCNET32_NAPI
> +	bool "Use NAPI RX polling "
> +	depends on PCNET32
> +	help
> +	  NAPI is a new driver API designed to reduce CPU and interrupt load
> +	  when the driver is receiving lots of packets from the card. It is
> +	  still somewhat experimental and thus not yet enabled by default.
> +
> +	  If your estimated Rx load is 10kpps or more, or if the card will be
> +	  deployed on potentially unfriendly networks (e.g. in a firewall),
> +	  then say Y here.
> +
> +	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
> +	  information.
> +
> +	  If in doubt, say N.
> +
>  config AMD8111_ETH
>  	tristate "AMD 8111 (new PCI lance) support"
>  	depends on NET_PCI && PCI
> diff -ruN linux-2.6.16.20/drivers/net/pcnet32.c linux-2.6.16.20.pcnet32napi/drivers/net/pcnet32.c
> --- linux-2.6.16.20/drivers/net/pcnet32.c	2006-06-05 13:18:23.000000000 -0400
> +++ linux-2.6.16.20.pcnet32napi/drivers/net/pcnet32.c	2006-06-07 12:00:36.000000000 -0400
> @@ -21,9 +21,15 @@
>   *
>   *************************************************************************/
>  
> +#include <linux/config.h>
> +
> +#ifdef CONFIG_PCNET32_NAPI
> +#define DRV_NAME	"pcnet32napi"
> +#else
>  #define DRV_NAME	"pcnet32"
> -#define DRV_VERSION	"1.31c"
> -#define DRV_RELDATE	"01.Nov.2005"
> +#endif
> +#define DRV_VERSION	"1.31d"
> +#define DRV_RELDATE	"06.Jun.2006"
>  #define PFX		DRV_NAME ": "
>  
>  static const char *version =
> @@ -265,6 +271,7 @@
>   * v1.31c  01 Nov 2005 Don Fry Allied Telesyn 2700/2701 FX are 100Mbit only.
>   *	   Force 100Mbit FD if Auto (ASEL) is selected.
>   *	   See Bugzilla 2669 and 4551.
> + * v1.31d  06 Jun 2006 Len Sorensen added NAPI support.
>   */
>  
>  
> @@ -383,6 +390,7 @@
>      struct mii_if_info	mii_if;
>      struct timer_list	watchdog_timer;
>      struct timer_list	blink_timer;
> +    struct timer_list	oom_timer;
>      u32			msg_enable;	/* debug message level */
>  };
>  
> @@ -392,7 +400,13 @@
>  static int  pcnet32_open(struct net_device *);
>  static int  pcnet32_init_ring(struct net_device *);
>  static int  pcnet32_start_xmit(struct sk_buff *, struct net_device *);
> +#ifdef CONFIG_PCNET32_NAPI
> +void disable_rx_and_norxbuff_ints(struct net_device *dev);
> +void enable_rx_and_norxbuff_ints(struct net_device *dev);
> +static int  pcnet32_poll(struct net_device *, int *budget);
> +#else
>  static int  pcnet32_rx(struct net_device *);
> +#endif
>  static void pcnet32_tx_timeout (struct net_device *dev);
>  static irqreturn_t pcnet32_interrupt(int, void *, struct pt_regs *);
>  static int  pcnet32_close(struct net_device *);
> @@ -422,6 +436,174 @@
>      PCI_ADDR0=0x10<<0, PCI_ADDR1=0x10<<1, PCI_ADDR2=0x10<<2, PCI_ADDR3=0x10<<3,
>  };
>  
> +#ifdef CONFIG_PCNET32_NAPI
> +void oom_timer(unsigned long data)
> +{
> +    struct net_device *dev = (struct net_device *)data;
> +    struct pcnet32_private *lp = dev->priv;
> +    lp->rl_active = 0;
> +    netif_rx_schedule(dev);
> +}
> +
> +static
> +int pcnet32_poll(struct net_device *dev, int *budget)
> +{
> +    struct pcnet32_private *lp = dev->priv;
> +    ulong ioaddr = dev->base_addr;
> +
> +    int entry = lp->cur_rx & lp->rx_mod_mask;
> +    int rx_work_limit = dev->quota;
> +    int received = 0;
> +
> +    if (!netif_running(dev))
> +	goto done;
> +
> +    do {
> +	// Clear RX interrupts
> +	lp->a.write_csr (ioaddr, 0, 0x1400);

Please indent with tabs (according to coding style) and avoid using //
comments.
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

  parent reply	other threads:[~2006-06-08  8:03 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-06-07 16:52 [PATCH] pcnet32 driver NAPI support Lennart Sorensen
2006-06-07 18:20 ` Don Fry
2006-06-07 19:34   ` Lennart Sorensen
2006-06-07 21:52     ` Don Fry
2006-06-07 22:32       ` Don Fry
2006-06-08 15:44         ` Lennart Sorensen
2006-06-08  8:03 ` Pavel Machek [this message]
2006-06-08 15:46   ` Lennart Sorensen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060608080253.GA20601@elf.ucw.cz \
    --to=pavel@ucw.cz \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-net@vger.kernel.org \
    --cc=lsorense@csclub.uwaterloo.ca \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.