* [linux-lvm] lvm and duplicates...
@ 2006-06-07 17:38 C'est Pierre
2006-06-08 5:52 ` Luca Berra
0 siblings, 1 reply; 4+ messages in thread
From: C'est Pierre @ 2006-06-07 17:38 UTC (permalink / raw)
To: LVM general discussion and development
Greetings,
I'm trying to setup a cluster with ServiceGuard but I am going through
a lot of hassles doing so. I did a mistake initially by trying to
pvcreate the 2 luns of the same physical disk from our storage (fiber
channel) and now, while trying to create a new logical volume, I get
this weird error, for the record the sda and sdb are the 2 luns coming
from different paths (cards):
# lvcreate -L1 -n quorum clusterfs
Found duplicate PV TJs3i47MkmyqU4KFCzdmp8N78w4C76mB: using /dev/sdb1
not /dev/sda1
Rounding up size to full physical extent 4.00 MB
Failed to activate new LV.
Even if I lvchange -a y clusterfs, it does seem to work (although the
"Found duplicate" message always shows up), but it doesn't, in fact,
solve the problerm when I try to lvcreate again, the same errors as
the one above, show up.
Any hints on how to fix this? I've already done pvremove /dev/sdb1 and
a pvinit /dev/sda1 again and tried to create the clusterfs again, as
when I do the pvremove -ff /dev/sdb1, the vg clusterfs disappears!
Please, help me out :)
Thank you!
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [linux-lvm] lvm and duplicates...
2006-06-07 17:38 [linux-lvm] lvm and duplicates C'est Pierre
@ 2006-06-08 5:52 ` Luca Berra
2006-06-08 9:48 ` C'est Pierre
0 siblings, 1 reply; 4+ messages in thread
From: Luca Berra @ 2006-06-08 5:52 UTC (permalink / raw)
To: linux-lvm
On Wed, Jun 07, 2006 at 06:38:49PM +0100, C'est Pierre wrote:
>Greetings,
>
>I'm trying to setup a cluster with ServiceGuard but I am going through
>a lot of hassles doing so. I did a mistake initially by trying to
>pvcreate the 2 luns of the same physical disk from our storage (fiber
>channel) and now, while trying to create a new logical volume, I get
>this weird error, for the record the sda and sdb are the 2 luns coming
>from different paths (cards):
>
you posted before about multipathing,
and you got one answer.
what did you do for the multipathing issue you had?
L.
--
Luca Berra -- bluca@comedia.it
Communication Media & Services S.r.l.
/"\
\ / ASCII RIBBON CAMPAIGN
X AGAINST HTML MAIL
/ \
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [linux-lvm] lvm and duplicates...
2006-06-08 5:52 ` Luca Berra
@ 2006-06-08 9:48 ` C'est Pierre
2006-06-08 19:52 ` Luca Berra
0 siblings, 1 reply; 4+ messages in thread
From: C'est Pierre @ 2006-06-08 9:48 UTC (permalink / raw)
To: LVM general discussion and development
Hello Luca
On 6/8/06, Luca Berra <bluca@comedia.it> wrote:
> On Wed, Jun 07, 2006 at 06:38:49PM +0100, C'est Pierre wrote:
> >Greetings,
> >
> >I'm trying to setup a cluster with ServiceGuard but I am going through
> >a lot of hassles doing so. I did a mistake initially by trying to
> >pvcreate the 2 luns of the same physical disk from our storage (fiber
> >channel) and now, while trying to create a new logical volume, I get
> >this weird error, for the record the sda and sdb are the 2 luns coming
> >from different paths (cards):
> >
> you posted before about multipathing,
> and you got one answer.
> what did you do for the multipathing issue you had?
You're right about that. We tried the multipathing, but suddenly one
of the nodes fc card, stopped working and we need to make a couple of
tests before our trial version of the clustering software expires, as
such, we need to fix the LVM problem before we get into the multipath
subject, which will only happen once HP replaces our FC card
> L.
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [linux-lvm] lvm and duplicates...
2006-06-08 9:48 ` C'est Pierre
@ 2006-06-08 19:52 ` Luca Berra
0 siblings, 0 replies; 4+ messages in thread
From: Luca Berra @ 2006-06-08 19:52 UTC (permalink / raw)
To: linux-lvm
On Thu, Jun 08, 2006 at 10:48:40AM +0100, C'est Pierre wrote:
>Hello Luca
>
>On 6/8/06, Luca Berra <bluca@comedia.it> wrote:
>>On Wed, Jun 07, 2006 at 06:38:49PM +0100, C'est Pierre wrote:
>> >Greetings,
>> >
>> >I'm trying to setup a cluster with ServiceGuard but I am going through
>> >a lot of hassles doing so. I did a mistake initially by trying to
>> >pvcreate the 2 luns of the same physical disk from our storage (fiber
>> >channel) and now, while trying to create a new logical volume, I get
>> >this weird error, for the record the sda and sdb are the 2 luns coming
>> >from different paths (cards):
>> >
>>you posted before about multipathing,
>>and you got one answer.
>>what did you do for the multipathing issue you had?
>
>
>You're right about that. We tried the multipathing, but suddenly one
>of the nodes fc card, stopped working and we need to make a couple of
>tests before our trial version of the clustering software expires, as
>such, we need to fix the LVM problem before we get into the multipath
>subject, which will only happen once HP replaces our FC card
but you just said that sda and sdb are the same disk seen from two
different paths?
--
Luca Berra -- bluca@comedia.it
Communication Media & Services S.r.l.
/"\
\ / ASCII RIBBON CAMPAIGN
X AGAINST HTML MAIL
/ \
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-06-08 19:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-07 17:38 [linux-lvm] lvm and duplicates C'est Pierre
2006-06-08 5:52 ` Luca Berra
2006-06-08 9:48 ` C'est Pierre
2006-06-08 19:52 ` Luca Berra
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.