From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jim Paris Subject: Re: libata-tj-stable success report, with minor patch Date: Mon, 12 Jun 2006 00:06:08 -0400 Message-ID: <20060612040608.GA32353@jim.sh> References: <20060612022358.GA29164@jim.sh> <448CE1E9.5000502@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from NEUROSIS.MIT.EDU ([18.95.3.133]:28308 "EHLO neurosis.jim.sh") by vger.kernel.org with ESMTP id S1750758AbWFLEGL (ORCPT ); Mon, 12 Jun 2006 00:06:11 -0400 Content-Disposition: inline In-Reply-To: <448CE1E9.5000502@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Tejun Heo Cc: linux-ide@vger.kernel.org > Hmmm... sil3726 and 4726 report different number of ports depending on > configuration. I'll try to get it right in the next round. Sounds good to me, thanks again. Let me know if there's anything I can help test. > That is a pretty cool enclosure you have there. How's the > performance? Haven't used it much yet, but it seems decent. "hdparm -t" gives 80MB/s on the RAID6 array across all disks. Each disk reads at 60MB/s alone, and reading from all 12 simultaneously gets 6 MB/s on each of the ten multiplexed disks and 30 MB/s on each of the last two disks. The card is in a normal PCI slot so that's probably maxing out my bus. -jim