All of lore.kernel.org
 help / color / mirror / Atom feed
From: "jagadeesh kalisetty" <jagadeesh.k@rediffmail.com>
To: linuxppc-dev@ozlabs.org
Subject: help requesting for mounting eldk tools on AMCC PPC 405EP Taihu kit
Date: 18 Jun 2006 15:23:44 -0000	[thread overview]
Message-ID: <20060618152344.13300.qmail@webmail18.rediffmail.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 6439 bytes --]

hi

 I am using Taihu Amcc PPC 405EP kit it already contains the U-boot, Linux kernel image, and ramdisk image. I connected the kit using c-kermit on fedora core 4 and installed eldk tools and added it (/opt/eldk/ppc_4xx) to NFS sharing.
While booting on kit I passed kernel arguments as 
setenv bootargs root=/dev/nfs nfsroot=192.168.2.18:/opt/eldk/ppc_4xx ip=192.168.1.62:::::eth0:off

 but the kernel is failed to mount on /dev/nfs as below please can you provide necessary steps to fix the problem.
I am waiting for your response. 
    
……….after U-booting on kit…..
Hit any key to stop autoboot:  0
=> setenv setboot setenv bootargs root=/dev/pts nfsroot=192.168.2.18:/opt/eldk/ppc_4xx ip=192.168.1.62:::::eth0:off
=> printenv
bootdelay=5
baudrate=9600
filesize=ebb7e5
ethaddr=50:00:00:00:25:00
eth1addr=50:00:00:00:25:01
loads_echo=1
ethact=ppc_4xx_eth0
bootcmd=run setboot;bootm 0xfc000000 0xfc300000
kozio=bootm 0xffe00000
RT_eth0_ip=192.168.1.62
RT_eth0_ip2=:::::eth0:off
stdin=serial
stdout=serial
stderr=serial
ver=U-Boot 1.1.4 (Jan 19 2006 - 14:16:53)
setboot=setenv bootargs root=/dev/pts nfsroot=192.168.2.18:/opt/eldk/ppc_4xx ip=192.168.1.62:::::eth0:off

Environment size: 450/16379 bytes
=> boot
## Booting image at fc000000 ...
   Image Name:   Linux-2.6.13
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1121647 Bytes =  1.1 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at fc300000 ...
   Image Name:   Taihu Ramdisk
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    15447973 Bytes = 14.7 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Ramdisk to 070e3000, end 07f9e7a5 ... OK
Linux version 2.6.13 (root@linux_box) (gcc version 4.0.0 (DENX ELDK 4.0 4.0.0)) #50 Tue Feb 7 09:07:24 CST 2006
AMCC PowerPC 405EP Taihu Platform
Built 1 zonelists
Kernel command line: root=/dev/pts nfsroot=192.168.2.18:/opt/eldk/ppc_4xx ip=192.168.1.62:::::eth0:off
PID hash table entries: 1024 (order: 10, 16384 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 112128k available (1916k kernel code, 452k data, 96k init, 0k highmem)
Mount-cache hash table entries: 512
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 15085k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at MMIO 0x0 (irq = 1) is a 16550A
ttyS1 at MMIO 0x0 (irq = 0) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
mal0: Initialized, 4 tx channels, 2 rx channels
emac: IBM EMAC Ethernet driver, version 2.0
Maintained by Benjamin Herrenschmidt <benh@kernel.crashing.org>
eth0: IBM emac, MAC 50:00:00:00:25:00
eth0: Found Generic MII PHY (0x14)
eth1: IBM emac, MAC 50:00:00:00:25:01
eth1: Found Generic MII PHY (0x10)
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
taihu: bootflash mapping: 200000 at ffe00000
AMCC Taihu Boot Flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 3 MTD partitions on "AMCC Taihu Boot Flash":
0x00000000-0x001a0000 : "kozio diags"
0x001a0000-0x001c0000 : "u-boot env"
0x001c0000-0x00200000 : "u-boot"
taihu: appflash mapping: 2000000 at fc000000
AMCC Taihu Application Flash: Found 2 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
AMCC Taihu Application Flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 3 MTD partitions on "AMCC Taihu Application Flash":
0x00000000-0x00300000 : "kernel"
0x00300000-0x01d00000 : "initrd"
0x01d00000-0x02000000 : "jffs2"
Yenta: CardBus bridge found at 0000:00:07.0 [0000:0000]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:07.0, mfunc 0x00001000, devctl 0x66
Yenta TI: socket 0000:00:07.0 probing PCI interrupt failed, trying to fix
Yenta TI: socket 0000:00:07.0 falling back to parallel PCI interrupts
Yenta TI: socket 0000:00:07.0 parallel PCI interrupts ok
eth0: Link is Up
eth0: Speed: 100, Full duplex.
Yenta: ISA IRQ mask 0x0000, PCI irq 26
Socket status: 30000087
pcmcia: parent PCI bridge I/O window: 0x0 - 0xffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0xbfffffff
zero gadget: Gadget Zero, version: St Patrick's Day 2004
zero gadget: using pd12_udc, OUT ep1out-bulk IN ep2in-bulk
pd12_udc: registered gadget driver 'zero'
i2c /dev entries driver
IBM IIC driver v2.1
ibm-iic0: using standard (100 kHz) mode
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
eth0: Link is Up
eth0: Speed: 100, Full duplex.
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
      device=eth0, addr=192.168.1.62, mask=255.255.255.0, gw=255.255.255.255,
     host=192.168.1.62, domain=, nis-domain=(none),
     bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
RAMDISK: Compressed image found at block 0
RAMDISK: incomplete write (-28 != 32768) 4194304
VFS: Cannot open root device "pts" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
 <0>Rebooting in 180 seconds..<NULL>



[-- Attachment #2: Type: text/html, Size: 7651 bytes --]

             reply	other threads:[~2006-06-18 15:32 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-06-18 15:23 jagadeesh kalisetty [this message]
2006-06-18 20:49 ` help requesting for mounting eldk tools on AMCC PPC 405EP Taihu kit Wolfgang Denk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060618152344.13300.qmail@webmail18.rediffmail.com \
    --to=jagadeesh.k@rediffmail.com \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.