From: Jean-Daniel Pauget <jd@disjunkt.com>
To: linux-kernel-owner@vger.kernel.org
Cc: john stultz <johnstul@us.ibm.com>,
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>,
bert hubert <bert.hubert@netherlabs.nl>,
george@mvista.com
Subject: Re: Linux 2.6.17: PM-Timer bug warning?
Date: Tue, 20 Jun 2006 15:03:41 +0200 [thread overview]
Message-ID: <20060620130341.GC5040@disjunkt.com> (raw)
In-Reply-To: <20060620101946.GA32658@rhlx01.fht-esslingen.de>
On Tue, Jun 20, 2006 at 12:19:46PM +0200, Andreas Mohr wrote:
> On Tue, Jun 20, 2006 at 12:08:00PM +0200, Jean-Daniel Pauget wrote:
> > though my hardware is in the gray list, it didn't trigger the bug
> > with OGAWA's test.
> [dual P4 Xeon board]
> Interesting, so it likely isn't buggy.
> Could you give lspci -v -v or so (to let us see chipset and revisions)?
> Oh wait, you already did:
> (.../...)
oups sorry, I think my post interfered with Chris Rankin's post.
my board is single cpu-ed (asus p4pe), gray-listed but OGAWA's test
doesn't trigger the bug :
myboard@asus-p4pe# lspci -v -v
0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 80b2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <available only to root>
0000:00:01.0 PCI bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: c6000000-c76fffff
Prefetchable memory behind bridge: d7700000-dfffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 4: I/O ports at d800 [size=32]
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at d400 [size=32]
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 17
Region 4: I/O ports at d000 [size=32]
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 18
Region 0: Memory at c5800000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <available only to root>
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 82) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: c3000000-c57fffff
Prefetchable memory behind bridge: c7700000-d76fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) UltraATA-100 IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at e800 [size=32]
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 80b0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 0: I/O ports at a800 [size=256]
Region 1: I/O ports at a400 [size=64]
Region 2: Memory at c2800000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at c2000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti 4200] (rev a3) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 8043
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at d7800000 (32-bit, prefetchable) [size=512K]
Expansion ROM at d77e0000 [disabled] [size=128K]
Capabilities: <available only to root>
0000:02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at c5000000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at b800 [size=128]
Capabilities: <available only to root>
0000:02:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 80a9
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c4800000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at d76f0000 [disabled] [size=64K]
Capabilities: <available only to root>
0000:02:0a.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at c3000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at c7800000 (32-bit, prefetchable) [size=512K]
Expansion ROM at c77e0000 [disabled] [size=128K]
Capabilities: <available only to root>
----------------------------------------------
--
Jean-Daniel Pauget - http://disjunkt.com - http://nekodune.com
Tél: +33 (0)2 33 17 20 16
2, rue André PELCA
50580 Denneville-Plage
France
next prev parent reply other threads:[~2006-06-21 10:59 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20060620100800.GB5040@disjunkt.com>
2006-06-20 10:19 ` Linux 2.6.17: PM-Timer bug warning? Andreas Mohr
2006-06-20 13:03 ` Jean-Daniel Pauget [this message]
2006-06-20 14:58 ` OGAWA Hirofumi
2006-06-20 15:16 ` Andreas Mohr
2006-06-23 18:22 ` [PATCH -mm] clocksource: add PM Timer bug hunting notes Andreas Mohr
2006-06-25 20:42 ` Linux-2.6.17: PMTimer results for another PCI chipset Chris Rankin
2006-06-26 12:08 ` Andreas Mohr
2006-06-26 17:44 ` Chris Rankin
2006-06-26 18:02 ` Andreas Mohr
2006-06-25 21:55 Linux 2.6.17: PM-Timer bug warning? Albert Cahalan
-- strict thread matches above, loose matches on Subject: below --
2006-06-20 0:15 Chris Rankin
2006-06-20 1:23 ` Con Kolivas
2006-06-20 7:59 ` Chris Rankin
2006-06-20 8:41 ` Andreas Mohr
2006-06-20 19:53 ` Chris Rankin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060620130341.GC5040@disjunkt.com \
--to=jd@disjunkt.com \
--cc=bert.hubert@netherlabs.nl \
--cc=george@mvista.com \
--cc=hirofumi@mail.parknet.co.jp \
--cc=johnstul@us.ibm.com \
--cc=linux-kernel-owner@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.