From: Andy Isaacson <adi@hexapodia.org>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.17-rc[56]-mm*: pcmcia "I/O resource not free"
Date: Tue, 20 Jun 2006 23:50:36 -0700 [thread overview]
Message-ID: <20060621065036.GR2038@hexapodia.org> (raw)
In-Reply-To: <20060620150317.746372c5.akpm@osdl.org>
On Tue, Jun 20, 2006 at 03:03:17PM -0700, Andrew Morton wrote:
> It's strange (to me) that IDE is requesting a single-byte memory region.
> Possibly we've broken the resource.c code such that it has some off-by-one
> and is now rejecting single-byte requests.
[snip]
> +++ a/kernel/resource.c
> + printk("conflict: %s[%Lx->%Lx]\n",
[snip]
> Then again, perhaps IDE is broken (as well?), because you don't have any
> single-byte iomem regions in your 2.6.17-rc6 /proc/iomem. It would be
> interesting to run this patch in both 2.6.17-rc6 and in 2.6.17-rc6-mm2, see
> what it says:
[snip]
> +++ 25-akpm/drivers/ide/ide.c Tue Jun 20 15:02:15 2006
> + printk("%s: single-byte request\n", __FUNCTION__);
> + dump_stack();
With both patches, rc6-mm2 dumps the following.
[ 2034.052000] pccard: PCMCIA card inserted into slot 0
[ 2034.052000] cs: memory probe 0xf0000000-0xf7ffffff: excluding 0xf0000000-0xf7ffffff
[ 2034.052000] cs: memory probe 0xd0200000-0xdfffffff: excluding 0xd0200000-0xd11fffff 0xd1a00000-0xd41fffff 0xd4a00000-0xd51fffff 0xd5a00000-0xd61fffff 0xd6a00000-0xd71fffff 0xd7a00000-0xd81fffff 0xd8a00000-0xd91fffff 0xd9a00000-0xda1fffff 0xdaa00000-0xdb1fffff 0xdba00000-0xdc1fffff 0xdca00000-0xdd1fffff 0xdda00000-0xde1fffff 0xdea00000-0xdf1fffff 0xdfa00000-0xe01fffff
[ 2034.060000] pcmcia: registering new device pcmcia0.0
[ 2034.060000] PM: Adding info for pcmcia:0.0
[ 2035.976000] conflict: PCI IO[0->ffff]
[ 2035.976000] hwif_request_region: single-byte request for ide2
[ 2035.976000] [<c0257386>] hwif_request_region+0xa6/0xb0
[ 2035.976000] [<c02574bf>] ide_hwif_request_regions+0x12f/0x150
[ 2035.976000] [<c0257177>] init_hwif_default+0x37/0x120
[ 2035.976000] [<f8b070b0>] idecs_mmio_fixup+0x0/0x30 [ide_cs]
[ 2035.976000] [<c025e8a9>] probe_hwif+0x29/0x4f0
[ 2035.976000] [<f8b070b0>] idecs_mmio_fixup+0x0/0x30 [ide_cs]
[ 2035.976000] [<c025ed85>] probe_hwif_init_with_fixup+0x15/0xa0
[ 2035.976000] [<c0257ea5>] ide_register_hw_with_fixup+0x165/0x1b0
[ 2035.976000] [<f8b070b0>] idecs_mmio_fixup+0x0/0x30 [ide_cs]
[ 2035.976000] [<f8b070b0>] idecs_mmio_fixup+0x0/0x30 [ide_cs]
[ 2035.976000] [<f8b07163>] idecs_register+0x83/0xd0 [ide_cs]
[ 2035.976000] [<f8b070b0>] idecs_mmio_fixup+0x0/0x30 [ide_cs]
[ 2035.976000] [<f8b071c0>] outb_mem+0x0/0x10 [ide_cs]
[ 2035.976000] [<f8b075e4>] ide_config+0x414/0x790 [ide_cs]
[ 2035.976000] [<f8b071c0>] outb_mem+0x0/0x10 [ide_cs]
[ 2035.976000] [<f8b0f4c8>] pcmcia_device_probe+0xa8/0x160 [pcmcia]
[ 2035.976000] [<c025104c>] driver_probe_device+0xbc/0xe0
[ 2035.976000] [<c02510f0>] __driver_attach+0x0/0x80
[ 2035.976000] [<c0251160>] __driver_attach+0x70/0x80
[ 2035.976000] [<c0250369>] bus_for_each_dev+0x69/0x80
[ 2035.976000] [<c0251195>] driver_attach+0x25/0x30
[ 2035.976000] [<c02510f0>] __driver_attach+0x0/0x80
[ 2035.976000] [<c0250968>] bus_add_driver+0x88/0xd0
[ 2035.976000] [<f8b0b00f>] init_ide_cs+0xf/0x11 [ide_cs]
[ 2035.976000] [<c0139f32>] sys_init_module+0xf2/0x190
[ 2035.976000] [<c02e3105>] sysenter_past_esp+0x56/0x79
[ 2035.976000] [<c02e007b>] inet6_lookup_listener+0x2b/0x100
[ 2035.976000] ide2: I/O resource 0xF8B0200E-0xF8B0200E not free.
[ 2035.976000] ide2: ports already in use, skipping probe
[ 2035.976000] conflict: PCI IO[0->ffff]
[ 2035.976000] hwif_request_region: single-byte request for ide2
[ 2035.976000] [<c0257386>] hwif_request_region+0xa6/0xb0
[ 2035.976000] [<c02574bf>] ide_hwif_request_regions+0x12f/0x150
[ 2035.976000] [<c0257177>] init_hwif_default+0x37/0x120
[snip 1400 lines more]
-andy
next prev parent reply other threads:[~2006-06-21 6:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-15 16:28 2.6.17-rc[56]-mm*: pcmcia "I/O resource not free" Andy Isaacson
2006-06-17 17:03 ` Andrew Morton
2006-06-20 21:17 ` Andy Isaacson
2006-06-20 22:03 ` Andrew Morton
2006-06-20 22:36 ` Randy.Dunlap
2006-06-21 6:50 ` Andy Isaacson [this message]
2006-06-21 7:46 ` Andrew Morton
2006-06-21 17:10 ` Andy Isaacson
2006-06-21 18:31 ` Andy Isaacson
2006-06-22 0:31 ` Vivek Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060621065036.GR2038@hexapodia.org \
--to=adi@hexapodia.org \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.