From: Arkadiusz Miskiewicz <arekm@pld-linux.org>
To: Jean Tourrilhes <jt@hpl.hp.com>
Cc: linux-kernel@vger.kernel.org
Subject: thinkpad z60m and nsc-ircc
Date: Sun, 25 Jun 2006 11:47:11 +0200 [thread overview]
Message-ID: <200606251147.11694.arekm@pld-linux.org> (raw)
Hi,
I've just upgraded kernel to todays 2.6.17 git version which has some of
nsc-ircc patches merged.
Unfortunately nsc-ircc stopped working for me after this upgrade:
hci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66] MMIO=[c0001000-c00017ff]
Max Packet=[2048] IR/IT contexts=[4/4]
usb 2-1: new low speed USB device using uhci_hcd and address 2
Yenta: CardBus bridge found at 0000:14:00.0 [1014:056c]
pnp: Unable to assign resources to device 00:09.
nsc-ircc: probe of 00:09 failed with error -16
nsc-ircc, Found chip at base=0x164e
nsc-ircc, Wrong chip version ff
Yenta: ISA IRQ mask 0x04b8, PCI irq 169
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
In earlier version (2.6.17 rc X) it was:
pnp: Device 00:09 activated.
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x164e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
my modprobe setup is:
alias irda0 nsc-ircc
options nsc-ircc dongle_id=0x09 io=0x2f8 irq=3 dma=3
install nsc-ircc /bin/setserial /dev/ttyS1 uart none port 0 irq
0; /sbin/modprobe --ignore-install nsc-ircc
--
Arkadiusz Miśkiewicz PLD/Linux Team
arekm / maven.pl http://ftp.pld-linux.org/
reply other threads:[~2006-06-25 9:47 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200606251147.11694.arekm@pld-linux.org \
--to=arekm@pld-linux.org \
--cc=jt@hpl.hp.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.