From: Adrian Bunk <bunk@stusta.de>
To: Andrew Morton <akpm@osdl.org>, alan@redhat.com
Cc: linux-kernel@vger.kernel.org, jgarzik@pobox.com,
linux-ide@vger.kernel.org
Subject: [-mm patch] make drivers/scsi/pata_it821x.c:it821x_passthru_dev_select() static
Date: Mon, 26 Jun 2006 01:13:24 +0200 [thread overview]
Message-ID: <20060625231324.GK23314@stusta.de> (raw)
In-Reply-To: <20060624061914.202fbfb5.akpm@osdl.org>
On Sat, Jun 24, 2006 at 06:19:14AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.17-mm1:
>...
> git-libata-all.patch
>...
> git trees
>...
This patch makes the needlessly global it821x_passthru_dev_select()
static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.17-mm2-full/drivers/scsi/pata_it821x.c.old 2006-06-25 22:52:11.000000000 +0200
+++ linux-2.6.17-mm2-full/drivers/scsi/pata_it821x.c 2006-06-25 22:52:52.000000000 +0200
@@ -411,7 +411,8 @@
* Device selection hook. If neccessary perform clock switching
*/
-void it821x_passthru_dev_select(struct ata_port *ap, unsigned int device)
+static void it821x_passthru_dev_select(struct ata_port *ap,
+ unsigned int device)
{
struct it821x_dev *itdev = ap->private_data;
if (itdev && device != itdev->last_device) {
next prev parent reply other threads:[~2006-06-25 23:13 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-24 13:19 2.6.17-mm2 Andrew Morton
2006-06-24 15:53 ` 2.6.17-mm2 Rafael J. Wysocki
2006-06-24 17:20 ` 2.6.17-mm2 Dave Jones
2006-06-24 21:34 ` 2.6.17-mm2 Andrew Morton
2006-06-25 8:51 ` 2.6.17-mm2 Rafael J. Wysocki
2006-06-25 10:22 ` 2.6.17-mm2 Andrew Morton
2006-06-25 15:16 ` 2.6.17-mm2 Andrew Morton
2006-06-25 18:23 ` 2.6.17-mm2 Sam Ravnborg
2006-06-25 18:40 ` 2.6.17-mm2 Andrew Morton
2006-06-25 21:21 ` 2.6.17-mm2 Sam Ravnborg
2006-06-30 7:38 ` 2.6.17-mm2 Randy.Dunlap
2006-07-02 10:11 ` 2.6.17-mm2 Russell King
2006-07-02 18:42 ` 2.6.17-mm2 Randy.Dunlap
2006-07-02 18:47 ` 2.6.17-mm2 Arjan van de Ven
2006-07-02 18:47 ` 2.6.17-mm2 Sam Ravnborg
2006-07-03 5:50 ` 2.6.17-mm2 Randy.Dunlap
2006-07-03 13:49 ` 2.6.17-mm2 Russell King
2006-06-25 19:19 ` 2.6.17-mm2 Rafael J. Wysocki
2006-06-26 20:13 ` 2.6.17-mm2 Chandra Seetharaman
2006-06-24 19:41 ` 2.6.17-mm2 Dominik Karall
2006-06-24 21:43 ` 2.6.17-mm2 Andrew Morton
2006-06-25 6:06 ` 2.6.17-mm2 Reuben Farrelly
2006-06-25 9:37 ` 2.6.17-mm2 Barry K. Nathan
2006-06-25 10:29 ` 2.6.17-mm2 Reuben Farrelly
2006-06-25 11:19 ` 2.6.17-mm2 Michal Piotrowski
2006-06-25 11:40 ` 2.6.17-mm2 Andrew Morton
2006-06-25 12:18 ` 2.6.17-mm2 Michal Piotrowski
2006-06-25 16:25 ` 2.6.17-mm2 (NULL pointer dereference) Dominik Karall
2006-06-25 17:18 ` Andrew Morton
2006-06-25 18:11 ` Dominik Karall
2006-06-25 16:47 ` 2.6.17-mm2: no QLA3YYY_NAPI help text Adrian Bunk
2006-06-25 19:32 ` 2.6.17-mm2: BLK_CPQ_CISS_DA=m error Adrian Bunk
2006-06-26 0:41 ` Vivek Goyal
2006-06-25 23:13 ` Adrian Bunk [this message]
2006-06-25 23:27 ` [-mm patch] make drivers/scsi/pata_it821x.c:it821x_passthru_dev_select() static Alan Cox
2006-06-27 1:03 ` Jeff Garzik
2006-06-25 23:13 ` [-mm patch] fs/cifs/cifsproto.h: remove #ifdef around small_smb_init_no_tc() prototype Adrian Bunk
2006-06-26 4:05 ` Steven French
2006-06-26 15:17 ` [-mm patch] drivers/scsi/arcmsr/: cleanups Adrian Bunk
2006-06-26 20:27 ` [-mm patch] drivers/md/raid5.c: remove an unused variable Adrian Bunk
2006-06-26 21:41 ` 2.6.17-mm2 hrtimer code wedges at boot? Valdis.Kletnieks
2006-06-26 22:50 ` Valdis.Kletnieks
2006-06-26 23:02 ` john stultz
2006-06-26 23:27 ` Thomas Gleixner
2006-06-27 2:12 ` Valdis.Kletnieks
2006-06-27 5:54 ` Thomas Gleixner
2006-06-27 10:16 ` Roman Zippel
2006-06-27 16:43 ` Valdis.Kletnieks
2006-06-27 17:10 ` Roman Zippel
2006-06-27 17:23 ` Roman Zippel
2006-06-27 19:07 ` Valdis.Kletnieks
2006-06-28 0:07 ` john stultz
2006-06-28 10:35 ` Roman Zippel
2006-06-28 11:44 ` Roman Zippel
2006-06-29 23:07 ` Valdis.Kletnieks
2006-06-30 19:26 ` john stultz
2006-06-30 21:04 ` Valdis.Kletnieks
2006-07-03 1:13 ` Roman Zippel
2006-07-03 1:56 ` Daniel Walker
2006-07-03 2:20 ` Valdis.Kletnieks
2006-07-03 20:08 ` john stultz
2006-07-03 19:59 ` john stultz
2006-07-04 22:21 ` Valdis.Kletnieks
2006-07-05 4:29 ` Valdis.Kletnieks
2006-07-06 0:37 ` Roman Zippel
2006-07-06 0:56 ` john stultz
2006-07-06 6:38 ` Valdis.Kletnieks
2006-07-06 0:51 ` john stultz
2006-07-06 1:12 ` john stultz
2006-07-06 5:43 ` john stultz
2006-07-06 20:33 ` Roman Zippel
2006-07-06 22:05 ` john stultz
2006-07-07 23:16 ` Roman Zippel
2006-07-08 20:02 ` [PATCH] adjust clock for lost ticks Roman Zippel
2006-07-09 21:25 ` john stultz
2006-06-28 23:41 ` 2.6.17-mm2 hrtimer code wedges at boot? john stultz
2006-06-29 11:24 ` Roman Zippel
2006-06-28 16:54 ` [-mm patch] include/asm-i386/acpi.h should #include <asm/processor.h> Adrian Bunk
2006-06-28 16:54 ` [-mm patch] fix sgivwfb compile Adrian Bunk
2006-06-28 16:54 ` [-mm patch] arch/i386/mach-visws/setup.c: remove dummy function calls Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060625231324.GK23314@stusta.de \
--to=bunk@stusta.de \
--cc=akpm@osdl.org \
--cc=alan@redhat.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.