From: Andi Kleen <ak@suse.de>
To: linux-ide@vger.kernel.org
Cc: jgarzik@pobox.com
Subject: More information on ATI IXP failure in git9
Date: Sun, 25 Jun 2006 23:59:27 +0200 [thread overview]
Message-ID: <200606252359.27671.ak@suse.de> (raw)
The system uses sata_sil with
00:11.0 IDE interface: ATI Technologies Inc ATI 437A Serial ATA Controller
00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller
I added some printks and it fails here:
static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
{
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
u8 status;
if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) {
u32 serror;
...
<------ hits two times,
goto freeze;
Appended a successfull boot from 2.6.16.
libata version 1.20 loaded.
sata_sil 0000:00:11.0: version 0.9
GSI 19 sharing vector 0xC9 and IRQ 19
ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 201
ata1: SATA max UDMA/100 cmd 0xFFFFC20000012080 ctl 0xFFFFC2000001208A bmdma 0xFFFFC20000012000 irq 201
ata2: SATA max UDMA/100 cmd 0xFFFFC200000120C0 ctl 0xFFFFC200000120CA bmdma 0xFFFFC20000012008 irq 201
ata1: SATA link down (SStatus 0)
scsi0 : sata_sil
ata2: SATA link up 1.5 Gbps (SStatus 113)
ata2: dev 0 cfg 00:0040 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:40ff 93:0000
ata2: dev 0 ATA-7, max UDMA7, 488397168 sectors: LBA48
sata_get_dev_handle: SATA dev addr=0x110000, handle=0x0000000000000000
ata2: dev 0 configured for UDMA/100
sata_get_dev_handle: SATA dev addr=0x110000, handle=0x0000000000000000
scsi1 : sata_sil
Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 177
ata3: SATA max UDMA/100 cmd 0xFFFFC20000014080 ctl 0xFFFFC2000001408A bmdma 0xFFFFC20000014000 irq 177
ata4: SATA max UDMA/100 cmd 0xFFFFC200000140C0 ctl 0xFFFFC200000140CA bmdma 0xFFFFC20000014008 irq 177
ata3: SATA link down (SStatus 0)
scsi2 : sata_sil
ata4: SATA link down (SStatus 0)
scsi3 : sata_sil
Driver 'sd' needs updating - please use bus_type methods
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 1:0:0:0: Attached scsi disk sda
-Andi
next reply other threads:[~2006-06-25 21:59 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-25 21:59 Andi Kleen [this message]
2006-06-25 22:19 ` More information on ATI IXP failure in git9 Jeff Garzik
2006-06-26 5:24 ` Andi Kleen
2006-06-25 23:23 ` Jeff Garzik
2006-06-26 2:10 ` Tejun Heo
2006-06-26 6:18 ` Andi Kleen
2006-06-26 8:40 ` Tejun Heo
2006-06-26 8:57 ` Tejun Heo
2006-06-26 9:22 ` Andi Kleen
2006-06-26 9:13 ` Andi Kleen
2006-06-26 12:23 ` [PATCH] sata_sil: disable hotplug interrupts on two ATI IXPs Tejun Heo
2006-06-26 16:33 ` Andi Kleen
2006-06-27 1:02 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200606252359.27671.ak@suse.de \
--to=ak@suse.de \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.