From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030240AbWF0SZZ (ORCPT ); Tue, 27 Jun 2006 14:25:25 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1030259AbWF0SZZ (ORCPT ); Tue, 27 Jun 2006 14:25:25 -0400 Received: from ns.virtualhost.dk ([195.184.98.160]:34366 "EHLO virtualhost.dk") by vger.kernel.org with ESMTP id S1030240AbWF0SZY (ORCPT ); Tue, 27 Jun 2006 14:25:24 -0400 Date: Tue, 27 Jun 2006 20:26:46 +0200 From: Jens Axboe To: Dave Jones , linux-kernel@vger.kernel.org Subject: Re: 2.6.17-git broke suspend! Message-ID: <20060627182646.GB32115@suse.de> References: <20060627181045.GA32115@suse.de> <20060627182014.GB7914@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20060627182014.GB7914@redhat.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Tue, Jun 27 2006, Dave Jones wrote: > On Tue, Jun 27, 2006 at 08:10:45PM +0200, Jens Axboe wrote: > > > Incidentally, /sys/devices/system/cpu/cpu0/ is also empty on this > > kernel. Some new magic option that needs to be enabled? Not suspending > > sucks, cpufreq not working sucks as well (I'm stuck on 800MHz). > > dmesg ? Is this powernow-k8 hardware ? Nopes, it's an IBM T43 so centrino. > If so, can you try backing out 6cad647da228486f36a9794137ad459e39b02590 > and e7bdd7a531320eb4a4a8160afbe0c7cc98ac7187 ? I guess that's not relevant then? I'll boot the older kernel and do a dmesg diff as well... 00000005fef5000 - 000000005ff00000 (ACPI NVS) BIOS-e820: 000000005ff00000 - 0000000060000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 1534MB LOWMEM available. On node 0 totalpages: 392928 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 388832 pages, LIFO batch:31 DMI present. ACPI: RSDP (v002 IBM ) @ 0x000f6c00 ACPI: XSDT (v001 IBM TP-1Y 0x00001240 LTP 0x00000000) @ 0x5fee6ff2 ACPI: FADT (v003 IBM TP-1Y 0x00001240 IBM 0x00000001) @ 0x5fee7100 ACPI: SSDT (v001 IBM TP-1Y 0x00001240 MSFT 0x0100000e) @ 0x5fee72b4 ACPI: ECDT (v001 IBM TP-1Y 0x00001240 IBM 0x00000001) @ 0x5fef4def ACPI: TCPA (v001 IBM TP-1Y 0x00001240 PTL 0x00000001) @ 0x5fef4e41 ACPI: MADT (v001 IBM TP-1Y 0x00001240 IBM 0x00000001) @ 0x5fef4e73 ACPI: MCFG (v001 IBM TP-1Y 0x00001240 IBM 0x00000001) @ 0x5fef4ecd ACPI: BOOT (v001 IBM TP-1Y 0x00001240 LTP 0x00000001) @ 0x5fef4fd8 ACPI: DSDT (v001 IBM TP-1Y 0x00001240 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 68000000 (gap: 60000000:80000000) Detected 798.110 MHz processor. Built 1 zonelists. Total pages: 392928 Kernel command line: root=/dev/sda1 vga=0x342 libata.atapi_enabled=1 libata.bridge_limits=0 resume=/dev/sda7 fcache.disable=1 Unknown boot option `libata.bridge_limits=0': ignoring mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=78380000 soft=7837f000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Memory: 1554624k/1571712k available (1740k kernel code, 16620k reserved, 658k data, 132k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1597.30 BogoMIPS (lpj=798654) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 0k freed ACPI: Core revision 20060608 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Found ECDT ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode. ACPI: Power Resource [PUBS] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices Intel 82802 RNG detected SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: a8100000-a81fffff PREFETCH window: c0000000-c7ffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: a8200000-a82fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: a8300000-a83fffff PREFETCH window: c8000000-c80fffff PCI: Bus 5, cardbus bridge: 0000:04:00.0 IO window: 00005000-000050ff IO window: 00005400-000054ff PREFETCH window: d0000000-d1ffffff MEM window: aa000000-abffffff PCI: Bridge: 0000:00:1e.0 IO window: 5000-8fff MEM window: a8400000-b7ffffff PREFETCH window: d0000000-d7ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Simple Boot Flag at 0x35 set to 0x1 Initializing Cryptographic API io scheduler noop registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] vesafb: framebuffer at 0xc0000000, mapped to 0xd8880000, using 5742k, total 65472k vesafb: mode is 1400x1050x16, linelength=2800, pages=21 vesafb: protected mode interface info at c000:5b55 vesafb: pmi: set display start = 780c5bc3, set palette = 780c5bfd vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 175x65 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled pnp: Unable to assign resources to device 00:09. serial: probe of 00:09 failed with error -16 ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 19 libata version 1.30 loaded. ata_piix 0000:00:1f.2: version 1.10 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18C0 irq 14 scsi0 : ata_piix ata1.00: configured for UDMA/100 Vendor: ATA Model: ST980825A Rev: 3.04 Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18C8 irq 15 scsi1 : ata_piix SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sd 0:0:0:0: Attached scsi disk sda usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' Using IPI Shortcut mode ACPI: (supports<6>Time: tsc clocksource has been installed. S0 S3 S4 S5) input: AT Translated Set 2 keyboard as /class/input/input0 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: sda1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 883340 EXT3-fs: sda1: 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 132k freed IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input1 EXT3 FS on sda1, internal journal Yenta: CardBus bridge found at 0000:04:00.0 [1014:056c] Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: AGP aperture is 256M @ 0x0 ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2k ipw2200: Copyright(c) 2003-2006 Intel Corporation Yenta: ISA IRQ mask 0x04b8, PCI irq 16 Socket status: 30000006 USB Universal Host Controller Interface driver v3.0 pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff pcmcia: parent PCI bridge Memory window: 0xa8400000 - 0xb7ffffff pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 20 ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection sd 0:0:0:0: Attached scsi generic sg0 type 0 ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels) tg3.c:v3.60 (June 17, 2006) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth1: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:10:c6:dd:56:af eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76180000] dma_mask[64-bit] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xa8000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1e.2 to 64 usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice intel8x0_measure_ac97_clock: measured 50410 usecs intel8x0: clocking to 48000 loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1951856k swap on /dev/sda7. Priority:-1 extents:1 across:1951856k ACPI: AC Adapter [AC] (off-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) ACPI: Processor [CPU] (supports 8 throttling states) Time: acpi_pm clocksource has been installed. ACPI: Thermal Zone [THM0] (46 C) ibm_acpi: IBM ThinkPad ACPI Extras v0.12a ibm_acpi: http://ibm-acpi.sf.net/ ibm_acpi: bay device not present PM: Writing back config space on device 0000:02:00.0 at offset c (was fcff0000, writing 0) NET: Registered protocol family 10 ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver eth1: no IPv6 routers present Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized -- Jens Axboe