From: Adrian Bunk <bunk@stusta.de>
To: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: v4l-dvb-maintainer@linuxtv.org, linux-kernel@vger.kernel.org
Subject: [2.6 patch] VIDEO_V4L1 shouldn't be user-visible
Date: Thu, 29 Jun 2006 21:21:24 +0200 [thread overview]
Message-ID: <20060629192124.GD19712@stusta.de> (raw)
VIDEO_V4L1 is an implementation detail that shouldn't be user-visible.
This patch changes VIDEO_V4L1 to be no longer user-visible and being
delect'ed by all drivers requiring it.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
drivers/media/Kconfig | 9 ---
drivers/media/dvb/ttpci/Kconfig | 15 +++--
drivers/media/radio/Kconfig | 46 +++++++++++------
drivers/media/video/Kconfig | 71 +++++++++++++++++----------
drivers/media/video/em28xx/Kconfig | 3 -
drivers/media/video/et61x251/Kconfig | 3 -
drivers/media/video/pwc/Kconfig | 3 -
drivers/media/video/sn9c102/Kconfig | 3 -
drivers/media/video/usbvideo/Kconfig | 9 ++-
drivers/media/video/zc0301/Kconfig | 3 -
10 files changed, 104 insertions(+), 61 deletions(-)
--- linux-2.6.17-mm4-full/drivers/media/Kconfig.old 2006-06-29 20:10:53.000000000 +0200
+++ linux-2.6.17-mm4-full/drivers/media/Kconfig 2006-06-29 20:11:51.000000000 +0200
@@ -25,15 +25,8 @@
module will be called videodev.
config VIDEO_V4L1
- bool "Enable Video For Linux API 1 (DEPRECATED)"
- depends on VIDEO_DEV
+ bool
select VIDEO_V4L1_COMPAT
- default y
- ---help---
- Enables a compatibility API used by most V4L2 devices to allow
- its usage with legacy applications that supports only V4L1 api.
-
- If you are unsure as to whether this is required, answer Y.
config VIDEO_V4L1_COMPAT
bool "Enable Video For Linux API 1 compatible Layer"
--- linux-2.6.17-mm4-full/drivers/media/dvb/ttpci/Kconfig.old 2006-06-29 20:11:59.000000000 +0200
+++ linux-2.6.17-mm4-full/drivers/media/dvb/ttpci/Kconfig 2006-06-29 20:13:36.000000000 +0200
@@ -1,6 +1,6 @@
config DVB_AV7110
tristate "AV7110 cards"
- depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
+ depends on DVB_CORE && PCI && I2C && VIDEO_DEV
select FW_LOADER
select VIDEO_SAA7146_VV
select DVB_VES1820
@@ -11,6 +11,7 @@
select DVB_STV0297
select DVB_L64781
select DVB_LNBP21
+ select VIDEO_V4L1
help
Support for SAA7146 and AV7110 based DVB cards as produced
by Fujitsu-Siemens, Technotrend, Hauppauge and others.
@@ -59,7 +60,7 @@
config DVB_BUDGET
tristate "Budget cards"
- depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
+ depends on DVB_CORE && PCI && I2C && VIDEO_DEV
select VIDEO_SAA7146
select DVB_STV0299
select DVB_VES1X93
@@ -69,6 +70,7 @@
select DVB_TDA10021
select DVB_S5H1420
select DVB_LNBP21
+ select VIDEO_V4L1
help
Support for simple SAA7146 based DVB cards
(so called Budget- or Nova-PCI cards) without onboard
@@ -81,12 +83,13 @@
config DVB_BUDGET_CI
tristate "Budget cards with onboard CI connector"
- depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
+ depends on DVB_CORE && PCI && I2C && VIDEO_DEV
select VIDEO_SAA7146
select DVB_STV0297
select DVB_STV0299
select DVB_TDA1004X
select DVB_LNBP21
+ select VIDEO_V4L1
help
Support for simple SAA7146 based DVB cards
(so called Budget- or Nova-PCI cards) without onboard
@@ -102,12 +105,13 @@
config DVB_BUDGET_AV
tristate "Budget cards with analog video inputs"
- depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
+ depends on DVB_CORE && PCI && I2C && VIDEO_DEV
select VIDEO_SAA7146_VV
select DVB_STV0299
select DVB_TDA1004X
select DVB_TDA10021
select FW_LOADER
+ select VIDEO_V4L1
help
Support for simple SAA7146 based DVB cards
(so called Budget- or Nova-PCI cards) without onboard
@@ -120,11 +124,12 @@
config DVB_BUDGET_PATCH
tristate "AV7110 cards with Budget Patch"
- depends on DVB_CORE && DVB_BUDGET && VIDEO_V4L1
+ depends on DVB_CORE && DVB_BUDGET && VIDEO_DEV
select DVB_AV7110
select DVB_STV0299
select DVB_VES1X93
select DVB_TDA8083
+ select VIDEO_V4L1
help
Support for Budget Patch (full TS) modification on
SAA7146+AV7110 based cards (DVB-S cards). This
--- linux-2.6.17-mm4-full/drivers/media/radio/Kconfig.old 2006-06-29 20:13:50.000000000 +0200
+++ linux-2.6.17-mm4-full/drivers/media/radio/Kconfig 2006-06-29 20:28:26.000000000 +0200
@@ -3,11 +3,12 @@
#
menu "Radio Adapters"
- depends on VIDEO_DEV!=n
+ depends on VIDEO_DEV
config RADIO_CADET
tristate "ADS Cadet AM/FM Tuner"
- depends on ISA && VIDEO_V4L1
+ depends on ISA
+ select VIDEO_V4L1
---help---
Choose Y here if you have one of these AM/FM radio cards, and then
fill in the port address below.
@@ -25,7 +26,8 @@
config RADIO_RTRACK
tristate "AIMSlab RadioTrack (aka RadioReveal) support"
- depends on ISA && VIDEO_V4L1
+ depends on ISA
+ select VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
@@ -59,7 +61,8 @@
config RADIO_RTRACK2
tristate "AIMSlab RadioTrack II support"
- depends on ISA && VIDEO_V4L1
+ depends on ISA
+ select VIDEO_V4L1
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below.
@@ -82,7 +85,8 @@
config RADIO_AZTECH
tristate "Aztech/Packard Bell Radio"
- depends on ISA && VIDEO_V4L1
+ depends on ISA
+ select VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
@@ -106,7 +110,8 @@
config RADIO_GEMTEK
tristate "GemTek Radio Card support"
- depends on ISA && VIDEO_V4L1
+ depends on ISA
+ select VIDEO_V4L1
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below.
@@ -131,7 +136,8 @@
config RADIO_GEMTEK_PCI
tristate "GemTek PCI Radio Card support"
- depends on VIDEO_V4L1 && PCI
+ depends on PCI
+ select VIDEO_V4L1
---help---
Choose Y here if you have this PCI FM radio card.
@@ -145,7 +151,8 @@
config RADIO_MAXIRADIO
tristate "Guillemot MAXI Radio FM 2000 radio"
- depends on VIDEO_V4L1 && PCI
+ depends on PCI
+ select VIDEO_V4L1
---help---
Choose Y here if you have this radio card. This card may also be
found as Gemtek PCI FM.
@@ -160,7 +167,7 @@
config RADIO_MAESTRO
tristate "Maestro on board radio"
- depends on VIDEO_V4L1
+ select VIDEO_V4L1
---help---
Say Y here to directly support the on-board radio tuner on the
Maestro 2 or 2E sound card.
@@ -175,7 +182,8 @@
config RADIO_MIROPCM20
tristate "miroSOUND PCM20 radio"
- depends on ISA && VIDEO_V4L1 && SOUND_ACI_MIXER
+ depends on ISA && SOUND_ACI_MIXER
+ select VIDEO_V4L1
---help---
Choose Y here if you have this FM radio card. You also need to say Y
to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
@@ -208,7 +216,8 @@
config RADIO_SF16FMI
tristate "SF16FMI Radio"
- depends on ISA && VIDEO_V4L1
+ depends on ISA
+ select VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards. If you
compile the driver into the kernel and your card is not PnP one, you
@@ -225,7 +234,8 @@
config RADIO_SF16FMR2
tristate "SF16FMR2 Radio"
- depends on ISA && VIDEO_V4L1
+ depends on ISA
+ select VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards.
@@ -239,7 +249,8 @@
config RADIO_TERRATEC
tristate "TerraTec ActiveRadio ISA Standalone"
- depends on ISA && VIDEO_V4L1
+ depends on ISA
+ select VIDEO_V4L1
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below. (TODO)
@@ -268,7 +279,8 @@
config RADIO_TRUST
tristate "Trust FM radio card"
- depends on ISA && VIDEO_V4L1
+ depends on ISA
+ select VIDEO_V4L1
help
This is a driver for the Trust FM radio cards. Say Y if you have
such a card and want to use it under Linux.
@@ -286,7 +298,8 @@
config RADIO_TYPHOON
tristate "Typhoon Radio (a.k.a. EcoRadio)"
- depends on ISA && VIDEO_V4L1
+ depends on ISA
+ select VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address and the frequency used for muting below.
@@ -330,7 +343,8 @@
config RADIO_ZOLTRIX
tristate "Zoltrix Radio"
- depends on ISA && VIDEO_V4L1
+ depends on ISA
+ select VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
--- linux-2.6.17-mm4-full/drivers/media/video/Kconfig.old 2006-06-29 20:16:52.000000000 +0200
+++ linux-2.6.17-mm4-full/drivers/media/video/Kconfig 2006-06-29 20:29:18.000000000 +0200
@@ -44,7 +44,8 @@
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
- depends on ISA && VIDEO_V4L1
+ depends on ISA
+ select VIDEO_V4L1
help
Say Y if you have such a thing.
@@ -53,7 +54,8 @@
config VIDEO_PLANB
tristate "PlanB Video-In on PowerMac"
- depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
+ depends on PPC_PMAC && BROKEN
+ select VIDEO_V4L1
help
PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
input hardware. If you want to experiment with this, say Y.
@@ -64,7 +66,8 @@
config VIDEO_BWQCAM
tristate "Quickcam BW Video For Linux"
- depends on PARPORT && VIDEO_V4L1
+ depends on PARPORT
+ select VIDEO_V4L1
help
Say Y have if you the black and white version of the QuickCam
camera. See the next option for the color version.
@@ -74,7 +77,8 @@
config VIDEO_CQCAM
tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
+ depends on EXPERIMENTAL && PARPORT
+ select VIDEO_V4L1
help
This is the video4linux driver for the colour version of the
Connectix QuickCam. If you have one of these cameras, say Y here,
@@ -85,7 +89,8 @@
config VIDEO_W9966
tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
- depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
+ depends on PARPORT_1284 && PARPORT
+ select VIDEO_V4L1
help
Video4linux driver for Winbond's w9966 based Webcams.
Currently tested with the LifeView FlyCam Supra.
@@ -98,7 +103,7 @@
config VIDEO_CPIA
tristate "CPiA Video For Linux"
- depends on VIDEO_V4L1
+ select VIDEO_V4L1
---help---
This is the video4linux driver for cameras based on Vision's CPiA
(Colour Processor Interface ASIC), such as the Creative Labs Video
@@ -135,7 +140,8 @@
config VIDEO_SAA5246A
tristate "SAA5246A, SAA5281 Teletext processor"
- depends on I2C && VIDEO_V4L1
+ depends on I2C
+ select VIDEO_V4L1
help
Support for I2C bus based teletext using the SAA5246A or SAA5281
chip. Useful only if you live in Europe.
@@ -162,7 +168,8 @@
config VIDEO_VINO
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
- depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L1
+ depends on I2C && SGI_IP22 && EXPERIMENTAL
+ select VIDEO_V4L1
select I2C_ALGO_SGI
help
Say Y here to build in support for the Vino video input system found
@@ -170,7 +177,8 @@
config VIDEO_STRADIS
tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && !PPC64
+ depends on EXPERIMENTAL && PCI && !PPC64
+ select VIDEO_V4L1
help
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
driver for PCI. There is a product page at
@@ -178,7 +186,8 @@
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux"
- depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && !PPC64
+ depends on PCI && I2C_ALGOBIT && !PPC64
+ select VIDEO_V4L1
help
Say Y for support for MJPEG capture cards based on the Zoran
36057/36067 PCI controller chipset. This includes the Iomega
@@ -226,13 +235,15 @@
config VIDEO_ZORAN_AVS6EYES
tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
- depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1
+ depends on VIDEO_ZORAN && EXPERIMENTAL
+ select VIDEO_V4L1
help
Support for the AverMedia 6 Eyes video surveillance card.
config VIDEO_ZR36120
tristate "Zoran ZR36120/36125 Video For Linux"
- depends on PCI && I2C && VIDEO_V4L1 && BROKEN
+ depends on PCI && I2C && BROKEN
+ select VIDEO_V4L1
help
Support for ZR36120/ZR36125 based frame grabber/overlay boards.
This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
@@ -244,7 +255,8 @@
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
- depends on PCI && SONYPI && VIDEO_V4L1
+ depends on PCI && SONYPI
+ select VIDEO_V4L1
---help---
This is the video4linux driver for the Motion Eye camera found
in the Vaio Picturebook laptops. Please read the material in
@@ -260,7 +272,8 @@
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
- depends on PCI && VIDEO_V4L1
+ depends on PCI
+ select VIDEO_V4L1
select VIDEO_SAA7146_VV
select VIDEO_TUNER
---help---
@@ -272,7 +285,8 @@
config VIDEO_DPC
tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
- depends on PCI && VIDEO_V4L1
+ depends on PCI
+ select VIDEO_V4L1
select VIDEO_SAA7146_VV
select VIDEO_V4L2
---help---
@@ -287,7 +301,8 @@
config VIDEO_HEXIUM_ORION
tristate "Hexium HV-PCI6 and Orion frame grabber"
- depends on PCI && VIDEO_V4L1
+ depends on PCI
+ select VIDEO_V4L1
select VIDEO_SAA7146_VV
select VIDEO_V4L2
---help---
@@ -299,7 +314,8 @@
config VIDEO_HEXIUM_GEMINI
tristate "Hexium Gemini frame grabber"
- depends on PCI && VIDEO_V4L1
+ depends on PCI
+ select VIDEO_V4L1
select VIDEO_SAA7146_VV
select VIDEO_V4L2
---help---
@@ -314,7 +330,8 @@
config VIDEO_M32R_AR
tristate "AR devices"
- depends on M32R && VIDEO_V4L1
+ depends on M32R
+ select VIDEO_V4L1
---help---
This is a video4linux driver for the Renesas AR (Artificial Retina)
camera module.
@@ -451,7 +468,8 @@
config USB_DSBR
tristate "D-Link USB FM radio support (EXPERIMENTAL)"
- depends on USB && VIDEO_V4L1 && EXPERIMENTAL
+ depends on USB && EXPERIMENTAL
+ select VIDEO_V4L1
---help---
Say Y here if you want to connect this type of radio to your
computer's USB port. Note that the audio is not digital, and
@@ -467,7 +485,8 @@
config VIDEO_OVCAMCHIP
tristate "OmniVision Camera Chip support"
- depends on I2C && VIDEO_V4L1
+ depends on I2C
+ select VIDEO_V4L1
---help---
Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
This driver is intended to be used with the ov511 and w9968cf USB
@@ -478,7 +497,8 @@
config USB_W9968CF
tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on USB && VIDEO_V4L1 && I2C
+ depends on USB && I2C
+ select VIDEO_V4L1
select VIDEO_OVCAMCHIP
---help---
Say Y here if you want support for cameras based on OV681 or
@@ -496,7 +516,8 @@
config USB_OV511
tristate "USB OV511 Camera support"
- depends on USB && VIDEO_V4L1
+ depends on USB
+ select VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
@@ -507,7 +528,8 @@
config USB_SE401
tristate "USB SE401 Camera support"
- depends on USB && VIDEO_V4L1
+ depends on USB
+ select VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/se401.txt>
@@ -520,7 +542,8 @@
config USB_STV680
tristate "USB STV680 (Pencam) Camera support"
- depends on USB && VIDEO_V4L1
+ depends on USB
+ select VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. This includes the Pencam line of cameras.
--- linux-2.6.17-mm4-full/drivers/media/video/em28xx/Kconfig.old 2006-06-29 20:20:15.000000000 +0200
+++ linux-2.6.17-mm4-full/drivers/media/video/em28xx/Kconfig 2006-06-29 20:20:33.000000000 +0200
@@ -1,6 +1,7 @@
config VIDEO_EM28XX
tristate "Empia EM2800/2820/2840 USB video capture support"
- depends on VIDEO_V4L1 && USB && I2C
+ depends on USB && I2C
+ select VIDEO_V4L1
select VIDEO_BUF
select VIDEO_TUNER
select VIDEO_TVEEPROM
--- linux-2.6.17-mm4-full/drivers/media/video/et61x251/Kconfig.old 2006-06-29 20:20:42.000000000 +0200
+++ linux-2.6.17-mm4-full/drivers/media/video/et61x251/Kconfig 2006-06-29 20:20:48.000000000 +0200
@@ -1,6 +1,7 @@
config USB_ET61X251
tristate "USB ET61X[12]51 PC Camera Controller support"
- depends on USB && VIDEO_V4L1
+ depends on USB
+ select VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on Etoms ET61X151
or ET61X251 PC Camera Controllers.
--- linux-2.6.17-mm4-full/drivers/media/video/pwc/Kconfig.old 2006-06-29 20:20:57.000000000 +0200
+++ linux-2.6.17-mm4-full/drivers/media/video/pwc/Kconfig 2006-06-29 20:21:04.000000000 +0200
@@ -1,6 +1,7 @@
config USB_PWC
tristate "USB Philips Cameras"
- depends on USB && VIDEO_V4L1
+ depends on USB
+ select VIDEO_V4L1
---help---
Say Y or M here if you want to use one of these Philips & OEM
webcams:
--- linux-2.6.17-mm4-full/drivers/media/video/sn9c102/Kconfig.old 2006-06-29 20:21:13.000000000 +0200
+++ linux-2.6.17-mm4-full/drivers/media/video/sn9c102/Kconfig 2006-06-29 20:21:23.000000000 +0200
@@ -1,6 +1,7 @@
config USB_SN9C102
tristate "USB SN9C10x PC Camera Controller support"
- depends on USB && VIDEO_V4L1
+ depends on USB
+ select VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on SONiX SN9C101,
SN9C102 or SN9C103 PC Camera Controllers.
--- linux-2.6.17-mm4-full/drivers/media/video/usbvideo/Kconfig.old 2006-06-29 20:21:31.000000000 +0200
+++ linux-2.6.17-mm4-full/drivers/media/video/usbvideo/Kconfig 2006-06-29 20:21:58.000000000 +0200
@@ -3,7 +3,8 @@
config USB_VICAM
tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
- depends on USB && VIDEO_V4L1 && EXPERIMENTAL
+ depends on USB && EXPERIMENTAL
+ select VIDEO_V4L1
select VIDEO_USBVIDEO
---help---
Say Y here if you have 3com homeconnect camera (vicam).
@@ -13,7 +14,8 @@
config USB_IBMCAM
tristate "USB IBM (Xirlink) C-it Camera support"
- depends on USB && VIDEO_V4L1
+ depends on USB
+ select VIDEO_V4L1
select VIDEO_USBVIDEO
---help---
Say Y here if you want to connect a IBM "C-It" camera, also known as
@@ -28,7 +30,8 @@
config USB_KONICAWC
tristate "USB Konica Webcam support"
- depends on USB && VIDEO_V4L1
+ depends on USB
+ select VIDEO_V4L1
select VIDEO_USBVIDEO
---help---
Say Y here if you want support for webcams based on a Konica
--- linux-2.6.17-mm4-full/drivers/media/video/zc0301/Kconfig.old 2006-06-29 20:22:19.000000000 +0200
+++ linux-2.6.17-mm4-full/drivers/media/video/zc0301/Kconfig 2006-06-29 20:22:27.000000000 +0200
@@ -1,6 +1,7 @@
config USB_ZC0301
tristate "USB ZC0301[P] Image Processor and Control Chip support"
- depends on USB && VIDEO_V4L1
+ depends on USB
+ select VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on the ZC0301 or
ZC0301P Image Processors and Control Chips.
next reply other threads:[~2006-06-29 19:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-29 19:21 Adrian Bunk [this message]
2006-06-29 20:18 ` [v4l-dvb-maintainer] [2.6 patch] VIDEO_V4L1 shouldn't be user-visible Mauro Carvalho Chehab
2006-06-29 21:08 ` Adrian Bunk
2006-06-29 21:43 ` Mauro Carvalho Chehab
2006-06-30 0:59 ` Jon Smirl
2006-06-30 19:14 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060629192124.GD19712@stusta.de \
--to=bunk@stusta.de \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab@infradead.org \
--cc=v4l-dvb-maintainer@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.