From: jparsons@sourceware.org <jparsons@sourceware.org>
To: cluster-devel.redhat.com
Subject: [Cluster-devel] cluster/fence/agents/scsi Makefile fence_scsi.pl
Date: 29 Jun 2006 21:36:10 -0000 [thread overview]
Message-ID: <20060629213610.16031.qmail@sourceware.org> (raw)
CVSROOT: /cvs/cluster
Module name: cluster
Changes by: jparsons at sourceware.org 2006-06-29 21:36:10
Added files:
fence/agents/scsi: Makefile fence_scsi.pl
Log message:
Makefile and cool new scsi agent renamed to match convention.
Patches:
http://sourceware.org/cgi-bin/cvsweb.cgi/cluster/fence/agents/scsi/Makefile.diff?cvsroot=cluster&r1=NONE&r2=1.1
http://sourceware.org/cgi-bin/cvsweb.cgi/cluster/fence/agents/scsi/fence_scsi.pl.diff?cvsroot=cluster&r1=NONE&r2=1.1
/cvs/cluster/cluster/fence/agents/scsi/Makefile,v --> standard output
revision 1.1
--- cluster/fence/agents/scsi/Makefile
+++ - 2006-06-29 21:36:10.371847000 +0000
@@ -0,0 +1,34 @@
+###############################################################################
+###############################################################################
+##
+## Copyright (C) 2006 Red Hat, Inc. All rights reserved.
+##
+## This copyrighted material is made available to anyone wishing to use,
+## modify, copy, or redistribute it subject to the terms and conditions
+## of the GNU General Public License v.2.
+##
+###############################################################################
+###############################################################################
+
+SOURCE= fence_scsi.pl
+TARGET= fence_scsi
+
+top_srcdir=../..
+include ${top_srcdir}/make/defines.mk
+
+all: $(TARGET)
+
+fence_scsi: fence_scsi.pl
+ : > $(TARGET)
+ awk "{print}(\$$1 ~ /#BEGIN_VERSION_GENERATION/){exit 0}" $(SOURCE) >> $(TARGET)
+ echo "\$$FENCE_RELEASE_NAME=\"${RELEASE}\";" >> $(TARGET)
+ ${top_srcdir}/scripts/define2var ${top_srcdir}/config/copyright.cf perl REDHAT_COPYRIGHT >> $(TARGET)
+ echo "\$$BUILD_DATE=\"(built `date`)\";" >> $(TARGET)
+ awk -v p=0 "(\$$1 ~ /#END_VERSION_GENERATION/){p = 1} {if(p==1)print}" $(SOURCE) >> $(TARGET)
+ chmod +x $(TARGET)
+
+copytobin: ${TARGET}
+ cp ${TARGET} ${top_srcdir}/bin/${TARGET}
+
+clean:
+ rm -f $(TARGET)
/cvs/cluster/cluster/fence/agents/scsi/fence_scsi.pl,v --> standard output
revision 1.1
--- cluster/fence/agents/scsi/fence_scsi.pl
+++ - 2006-06-29 21:36:10.497192000 +0000
@@ -0,0 +1,228 @@
+#!/usr/bin/perl
+
+use Getopt::Std;
+use IPC::Open3;
+use POSIX;
+
+my $verbose = 0;
+my @volumes;
+
+$_ = $0;
+s/.*\///;
+my $pname = $_;
+
+# WARNING!! Do not add code bewteen "#BEGIN_VERSION_GENERATION" and
+# "#END_VERSION_GENERATION" It is generated by the Makefile
+
+#BEGIN_VERSION_GENERATION
+$FENCE_RELEASE_NAME="";
+$REDHAT_COPYRIGHT="";
+$BUILD_DATE="";
+#END_VERSION_GENERATION
+
+sub usage
+{
+ print "Usage\n";
+ print "\n";
+ print "$pname [options]\n";
+ print "\n";
+ print "Options\n";
+ print " -n <node> IP address or hostname of node to fence\n";
+ print " -h usage\n";
+ print " -V version\n";
+ print " -v verbose\n";
+
+ exit 0;
+}
+
+sub version
+{
+ print "$pname $FENCE_RELEASE_NAME $BUILD_DATE\n";
+ print "$REDHAT_COPYRIGHT\n" if ( $REDHAT_COPYRIGHT );
+
+ exit 0;
+}
+
+sub fail
+{
+ ($msg)=@_;
+
+ print $msg."\n" unless defined $opt_q;
+
+ exit 1;
+}
+
+sub fail_usage
+{
+ ($msg)=@_;
+
+ print STDERR $msg."\n" if $msg;
+ print STDERR "Please use '-h' for usage.\n";
+
+ exit 1;
+}
+
+sub get_key
+{
+ ($node)=@_;
+
+ my $addr = gethostbyname($node) or die "$!\n";
+
+ return unpack("H*", $addr);
+}
+
+sub get_options_stdin
+{
+ my $opt;
+ my $line = 0;
+
+ while (defined($in = <>))
+ {
+ $_ = $in;
+ chomp;
+
+ # strip leading and trailing whitespace
+ s/^\s*//;
+ s/\s*$//;
+
+ # skip comments
+ next if /^#/;
+
+ $line += 1;
+ $opt = $_;
+
+ next unless $opt;
+
+ ($name, $val) = split /\s*=\s/, $opt;
+
+ if ($name eq "")
+ {
+ print STDERR "parse error: illegal name in option $line\n";
+ exit 2;
+ }
+ elsif ($name eq "agent")
+ {
+ }
+ elsif ($name eq "node")
+ {
+ $opt_n = $val;
+ }
+ elsif ($name eq "verbose")
+ {
+ $opt_v = $val;
+ }
+ else
+ {
+ fail "parse error: unknown option \"$opt\"";
+ }
+ }
+}
+
+sub get_scsi_devices
+{
+ my ($in, $out, $err);
+ my $cmd = "lvs --noheadings --separator : -o vg_attr,devices";
+ my $pid = open3($in, $out, $err, $cmd) or die "$!\n";
+
+ waitpid($pid, 0);
+
+ die "Unable to execute lvs.\n" if ($?>>8);
+
+ while (<$out>)
+ {
+ chomp;
+ print "OUT: $_\n" if $opt_v;
+
+ my ($vg_attrs, $device) = split /:/, $_, 3;
+
+ if ($vg_attrs =~ /.*c$/)
+ {
+ $device =~ s/\(.*\)//;
+ push @volumes, $device;
+ }
+ }
+}
+
+sub check_sg_persist
+{
+ my ($in, $out, $err);
+ my $cmd = "sg_persist -V";
+ my $pid = open3($in, $out, $err, $cmd) or die "$!\n";
+
+ waitpid($pid, 0);
+
+ die "Unable to execute sg_persist.\n" if ($?>>8);
+
+ close($in);
+ close($out);
+ close($err);
+}
+
+sub fence_node
+{
+ my $name = (POSIX::uname())[1];
+
+ my $host_key = get_key($name);
+ my $node_key = get_key($opt_n);
+
+ my $cmd;
+ my ($in, $out, $err);
+
+ foreach $dev (@volumes)
+ {
+ if ($host_key eq $node_key)
+ {
+ $cmd = "sg_persist -d $dev -o -G -K $host_key -S 0";
+ }
+ else
+ {
+ $cmd = "sg_persist -d $dev -o -A -K $host_key -S $node_key -T 5";
+ }
+
+ my $pid = open3($in, $out, $err, $cmd) or die "$!\n";
+
+ waitpid($pid, 0);
+
+ if ($opt_v)
+ {
+ print "$cmd\n";
+ while (<$out>)
+ {
+ chomp;
+ print "OUT: $_\n";
+ }
+ }
+
+ die "Unable to execute sg_persist.\n" if ($?>>8);
+
+ close($in);
+ close($out);
+ close($err);
+ }
+}
+
+### MAIN #######################################################
+
+if (@ARGV > 0) {
+
+ getopts("n:hqvV") || fail_usage;
+
+ usage if defined $opt_h;
+ version if defined $opt_V;
+
+ fail_usage "Unkown parameter." if (@ARGV > 0);
+ fail_usage "No '-n' flag specified." unless defined $opt_n;
+
+} else {
+
+ get_options_stdin();
+
+ fail "failed: missing 'node'" unless defined $node;
+
+}
+
+check_sg_persist;
+
+get_scsi_devices;
+
+fence_node;
reply other threads:[~2006-06-29 21:36 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060629213610.16031.qmail@sourceware.org \
--to=jparsons@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.