All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] drivers/acpi/Kconfig typos
@ 2006-07-05  0:52 Matt LaPlante
  0 siblings, 0 replies; only message in thread
From: Matt LaPlante @ 2006-07-05  0:52 UTC (permalink / raw)
  To: linux-kernel; +Cc: trivial

Three typos in drivers/acpi/Kconfig...

-- 
Matt LaPlante
CCNP, CCDP, A+, Linux+, CQS
kernel1@cyberdogtech.com

--

--- a/drivers/acpi/Kconfig	2006-07-04 20:18:01.000000000 -0400
+++ b/drivers/acpi/Kconfig	2006-07-04 20:52:34.000000000 -0400
@@ -254,7 +254,7 @@
 	depends on !STANDALONE
 	default n 
 	help
-	  Thist option is to load a custom ACPI DSDT
+	  This option is to load a custom ACPI DSDT
 	  If you don't know what that is, say N.
 
 config ACPI_CUSTOM_DSDT_FILE
@@ -311,7 +311,7 @@
 	  The Power Management Timer is available on all ACPI-capable,
 	  in most cases even if ACPI is unusable or blacklisted.
 
-	  This timing source is not affected by powermanagement features
+	  This timing source is not affected by power management features
 	  like aggressive processor idling, throttling, frequency and/or
 	  voltage scaling, unlike the commonly used Time Stamp Counter
 	  (TSC) timing source.
@@ -346,7 +346,7 @@
 	  Enabling this driver assumes that your platform hardware
 	  and firmware have support for hot-plugging physical memory. If
 	  your system does not support physically adding or ripping out 
-	  memory DIMMs at some platfrom defined granularity (individually 
+	  memory DIMMs at some platform defined granularity (individually 
 	  or as a bank) at runtime, then you need not enable this driver.
 
 	  If one selects "m," this driver can be loaded using the following


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2006-07-05  0:53 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-07-05  0:52 [PATCH] drivers/acpi/Kconfig typos Matt LaPlante

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.