From: Johannes Berg <johannes@sipsolutions.net>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH 05/12] aoa: i2sbus: revamp control layer
Date: Fri, 07 Jul 2006 18:52:12 +0200 [thread overview]
Message-ID: <20060707165530.805500000@sipsolutions.net> (raw)
In-Reply-To: 20060707165207.877010000@sipsolutions.net
This patch revamps the i2sbus control layer by using the macio/keylargo
functions instead of directly mapping.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
--- linux-2.6-fetch.orig/sound/aoa/soundbus/i2sbus/i2sbus.h 2006-07-07 12:15:51.277697157 +0200
+++ linux-2.6-fetch/sound/aoa/soundbus/i2sbus/i2sbus.h 2006-07-07 12:15:53.277697157 +0200
@@ -7,20 +7,22 @@
*/
#ifndef __I2SBUS_H
#define __I2SBUS_H
-#include <asm/dbdma.h>
#include <linux/interrupt.h>
-#include <sound/pcm.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
+
+#include <sound/pcm.h>
+
#include <asm/prom.h>
+#include <asm/pmac_feature.h>
+#include <asm/dbdma.h>
+
#include "i2sbus-interface.h"
-#include "i2sbus-control.h"
#include "../soundbus.h"
struct i2sbus_control {
- volatile struct i2s_control_regs __iomem *controlregs;
- struct resource rsrc;
struct list_head list;
+ struct macio_chip *macio;
};
#define MAX_DBDMA_COMMANDS 32
--- linux-2.6-fetch.orig/sound/aoa/soundbus/i2sbus/i2sbus-control.c 2006-07-07 12:15:39.837697157 +0200
+++ linux-2.6-fetch/sound/aoa/soundbus/i2sbus/i2sbus-control.c 2006-07-07 12:15:53.277697157 +0200
@@ -6,12 +6,16 @@
* GPL v2, can be found in COPYING.
*/
-#include <asm/io.h>
+#include <linux/kernel.h>
#include <linux/delay.h>
+
+#include <asm/io.h>
#include <asm/prom.h>
#include <asm/macio.h>
#include <asm/pmac_feature.h>
#include <asm/pmac_pfunc.h>
+#include <asm/keylargo.h>
+
#include "i2sbus.h"
int i2sbus_control_init(struct macio_dev* dev, struct i2sbus_control **c)
@@ -22,26 +26,12 @@ int i2sbus_control_init(struct macio_dev
INIT_LIST_HEAD(&(*c)->list);
- if (of_address_to_resource(dev->ofdev.node, 0, &(*c)->rsrc))
- goto err;
- /* we really should be using feature calls instead of mapping
- * these registers. It's safe for now since no one else is
- * touching them... */
- (*c)->controlregs = ioremap((*c)->rsrc.start,
- sizeof(struct i2s_control_regs));
- if (!(*c)->controlregs)
- goto err;
-
+ (*c)->macio = dev->bus->chip;
return 0;
- err:
- kfree(*c);
- *c = NULL;
- return -ENODEV;
}
void i2sbus_control_destroy(struct i2sbus_control *c)
{
- iounmap(c->controlregs);
kfree(c);
}
@@ -93,19 +83,22 @@ int i2sbus_control_enable(struct i2sbus_
struct i2sbus_dev *i2sdev)
{
struct pmf_args args = { .count = 0 };
- int cc;
+ struct macio_chip *macio = c->macio;
if (i2sdev->enable)
return pmf_call_one(i2sdev->enable, &args);
+ if (macio == NULL || macio->base == NULL)
+ return -ENODEV;
+
switch (i2sdev->bus_number) {
case 0:
- cc = in_le32(&c->controlregs->cell_control);
- out_le32(&c->controlregs->cell_control, cc | CTRL_CLOCK_INTF_0_ENABLE);
+ /* these need to be locked or done through
+ * newly created feature calls! */
+ MACIO_BIS(KEYLARGO_FCR1, KL1_I2S0_ENABLE);
break;
case 1:
- cc = in_le32(&c->controlregs->cell_control);
- out_le32(&c->controlregs->cell_control, cc | CTRL_CLOCK_INTF_1_ENABLE);
+ MACIO_BIS(KEYLARGO_FCR1, KL1_I2S1_ENABLE);
break;
default:
return -ENODEV;
@@ -118,7 +111,7 @@ int i2sbus_control_cell(struct i2sbus_co
int enable)
{
struct pmf_args args = { .count = 0 };
- int cc;
+ struct macio_chip *macio = c->macio;
switch (enable) {
case 0:
@@ -133,18 +126,22 @@ int i2sbus_control_cell(struct i2sbus_co
printk(KERN_ERR "i2sbus: INVALID CELL ENABLE VALUE\n");
return -ENODEV;
}
+
+ if (macio == NULL || macio->base == NULL)
+ return -ENODEV;
+
switch (i2sdev->bus_number) {
case 0:
- cc = in_le32(&c->controlregs->cell_control);
- cc &= ~CTRL_CLOCK_CELL_0_ENABLE;
- cc |= enable * CTRL_CLOCK_CELL_0_ENABLE;
- out_le32(&c->controlregs->cell_control, cc);
+ if (enable)
+ MACIO_BIS(KEYLARGO_FCR1, KL1_I2S0_CELL_ENABLE);
+ else
+ MACIO_BIC(KEYLARGO_FCR1, KL1_I2S0_CELL_ENABLE);
break;
case 1:
- cc = in_le32(&c->controlregs->cell_control);
- cc &= ~CTRL_CLOCK_CELL_1_ENABLE;
- cc |= enable * CTRL_CLOCK_CELL_1_ENABLE;
- out_le32(&c->controlregs->cell_control, cc);
+ if (enable)
+ MACIO_BIS(KEYLARGO_FCR1, KL1_I2S1_CELL_ENABLE);
+ else
+ MACIO_BIC(KEYLARGO_FCR1, KL1_I2S1_CELL_ENABLE);
break;
default:
return -ENODEV;
@@ -157,7 +154,7 @@ int i2sbus_control_clock(struct i2sbus_c
int enable)
{
struct pmf_args args = { .count = 0 };
- int cc;
+ struct macio_chip *macio = c->macio;
switch (enable) {
case 0:
@@ -172,18 +169,22 @@ int i2sbus_control_clock(struct i2sbus_c
printk(KERN_ERR "i2sbus: INVALID CLOCK ENABLE VALUE\n");
return -ENODEV;
}
+
+ if (macio == NULL || macio->base == NULL)
+ return -ENODEV;
+
switch (i2sdev->bus_number) {
case 0:
- cc = in_le32(&c->controlregs->cell_control);
- cc &= ~CTRL_CLOCK_CLOCK_0_ENABLE;
- cc |= enable * CTRL_CLOCK_CLOCK_0_ENABLE;
- out_le32(&c->controlregs->cell_control, cc);
+ if (enable)
+ MACIO_BIS(KEYLARGO_FCR1, KL1_I2S0_CLK_ENABLE_BIT);
+ else
+ MACIO_BIC(KEYLARGO_FCR1, KL1_I2S0_CLK_ENABLE_BIT);
break;
case 1:
- cc = in_le32(&c->controlregs->cell_control);
- cc &= ~CTRL_CLOCK_CLOCK_1_ENABLE;
- cc |= enable * CTRL_CLOCK_CLOCK_1_ENABLE;
- out_le32(&c->controlregs->cell_control, cc);
+ if (enable)
+ MACIO_BIS(KEYLARGO_FCR1, KL1_I2S1_CLK_ENABLE_BIT);
+ else
+ MACIO_BIC(KEYLARGO_FCR1, KL1_I2S1_CLK_ENABLE_BIT);
break;
default:
return -ENODEV;
--- linux-2.6-fetch.orig/sound/aoa/soundbus/i2sbus/i2sbus-control.h 2006-07-07 12:15:39.887697157 +0200
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,37 +0,0 @@
-/*
- * i2sbus driver -- bus register definitions
- *
- * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
- *
- * GPL v2, can be found in COPYING.
- */
-#ifndef __I2SBUS_CONTROLREGS_H
-#define __I2SBUS_CONTROLREGS_H
-
-/* i2s control registers, at least what we know about them */
-
-#define __PAD(m,n) u8 __pad##m[n]
-#define _PAD(line, n) __PAD(line, n)
-#define PAD(n) _PAD(__LINE__, (n))
-struct i2s_control_regs {
- PAD(0x38);
- __le32 fcr0; /* 0x38 (unknown) */
- __le32 cell_control; /* 0x3c (fcr1) */
- __le32 fcr2; /* 0x40 (unknown) */
- __le32 fcr3; /* 0x44 (fcr3) */
- __le32 clock_control; /* 0x48 (unknown) */
- PAD(4);
- /* total size: 0x50 bytes */
-} __attribute__((__packed__));
-
-#define CTRL_CLOCK_CELL_0_ENABLE (1<<10)
-#define CTRL_CLOCK_CLOCK_0_ENABLE (1<<12)
-#define CTRL_CLOCK_SWRESET_0 (1<<11)
-#define CTRL_CLOCK_INTF_0_ENABLE (1<<13)
-
-#define CTRL_CLOCK_CELL_1_ENABLE (1<<17)
-#define CTRL_CLOCK_CLOCK_1_ENABLE (1<<18)
-#define CTRL_CLOCK_SWRESET_1 (1<<19)
-#define CTRL_CLOCK_INTF_1_ENABLE (1<<20)
-
-#endif /* __I2SBUS_CONTROLREGS_H */
--
next prev parent reply other threads:[~2006-07-07 17:00 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-07 16:52 [PATCH 00/12] aoa: fix regressions over snd-powermac Johannes Berg
2006-07-07 16:52 ` [PATCH 01/12] Use proper irq mapping interface for snd-aoa-i2sbus Johannes Berg
2006-07-07 16:52 ` [PATCH 02/12] aoa: i2sbus: move module parameter declaration up Johannes Berg
2006-07-07 16:52 ` [PATCH 03/12] aoa: i2sbus: fix for PowerMac7,2 and 7,3 Johannes Berg
2006-07-07 16:52 ` [PATCH 04/12] aoa: fix when all is built into the kernel Johannes Berg
2006-07-07 16:52 ` Johannes Berg [this message]
2006-07-07 16:52 ` [PATCH 06/12] aoa: pmf gpio: report if function calling fails Johannes Berg
2006-07-15 17:12 ` Andreas Schwab
2006-07-16 8:43 ` Johannes Berg
2006-07-07 16:52 ` [PATCH 07/12] aoa fabric layout: clean up messages Johannes Berg
2006-07-07 16:52 ` [PATCH 08/12] aoa: tas: change PCM1 name to PCM Johannes Berg
2006-07-07 16:52 ` [PATCH 09/12] aoa: tas: fix initialisation/reset Johannes Berg
2006-07-07 16:52 ` [PATCH 10/12] aoa: tas: surface DRC control again Johannes Berg
2006-07-07 16:52 ` [PATCH 11/12] aoa: layout fabric: add missing module aliases Johannes Berg
2006-07-07 16:52 ` [PATCH 12/12] aoa: tas: add missing bass/treble controls Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060707165530.805500000@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.