From: Dave Jones <davej@redhat.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: netdev@vger.kernel.org
Subject: e100 lockdep irq lock inversion.
Date: Fri, 7 Jul 2006 13:19:16 -0400 [thread overview]
Message-ID: <20060707171916.GA16343@redhat.com> (raw)
Another one triggered by a Fedora-development user..
e100: eth1: e100_watchdog: link up, 100Mbps, half-duplex
=========================================================
[ INFO: possible irq lock inversion dependency detected ]
---------------------------------------------------------
ipcalc/1671 just changed the state of lock:
(&skb_queue_lock_key){-+..}, at: [<c05ebe2f>] udp_ioctl+0x3b/0x6e
but this lock was taken by another, hard-irq-safe lock in the past:
(&ai->aux_lock){+...}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
no locks held by ipcalc/1671.
the first lock's dependencies:
-> (&skb_queue_lock_key){-+..} ops: 0 {
initial-use at:
[<c043c546>] lock_acquire+0x4b/0x6d
[<c060e5c7>] _spin_lock_irqsave+0x22/0x32
[<c05b0d2d>] skb_queue_tail+0x14/0x32
[<c05c8a53>] netlink_broadcast+0x1bf/0x28e
[<c04e414b>] kobject_uevent+0x345/0x3b6
[<c055080d>] class_device_add+0x2a7/0x3e6
[<c0594d0c>] input_register_device+0x106/0x238
[<c059947a>] psmouse_connect+0x162/0x20f
[<c0590a09>] serio_connect_driver+0x1e/0x2e
[<c0590a2f>] serio_driver_probe+0x16/0x18
[<c054f9a6>] driver_probe_device+0x45/0x92
[<c054fad3>] __driver_attach+0x68/0x93
[<c054f420>] bus_for_each_dev+0x3a/0x5f
[<c054f901>] driver_attach+0x14/0x17
[<c054f0f7>] bus_add_driver+0x68/0x106
[<c054fda1>] driver_register+0x9d/0xa2
[<c0591522>] serio_thread+0x152/0x27c
[<c04365dc>] kthread+0xc3/0xef
[<c0402005>] kernel_thread_helper+0x5/0xb
in-softirq-W at:
[<c043c546>] lock_acquire+0x4b/0x6d
[<c060e5c7>] _spin_lock_irqsave+0x22/0x32
[<c05b0d2d>] skb_queue_tail+0x14/0x32
[<c05b05c4>] sock_queue_rcv_skb+0xe3/0x11f
[<c060adae>] packet_rcv_spkt+0x120/0x136
[<c05b5b86>] netif_receive_skb+0x1d4/0x26b
[<e09fa8e8>] e100_poll+0x15a/0x2fc [e100]
[<c05b7682>] net_rx_action+0xa6/0x1df
[<c0429809>] __do_softirq+0x78/0xf2
[<c04065ab>] do_softirq+0x5a/0xbe
hardirq-on-W at:
[<c043c546>] lock_acquire+0x4b/0x6d
[<c060e2c8>] _spin_lock_bh+0x1e/0x2d
[<c05ebe2f>] udp_ioctl+0x3b/0x6e
[<c05f08e7>] inet_ioctl+0x8c/0x91
[<c05acabc>] sock_ioctl+0x1b5/0x1d3
[<c0481e56>] do_ioctl+0x22/0x67
[<c04820f3>] vfs_ioctl+0x258/0x26b
[<c048214d>] sys_ioctl+0x47/0x62
[<c0403f2f>] syscall_call+0x7/0xb
}
... key at: [<c09b0748>] skb_queue_lock_key+0x0/0x18
the second lock's dependencies:
-> (&ai->aux_lock){+...} ops: 0 {
initial-use at:
[<c043c546>] lock_acquire+0x4b/0x6d
[<c060e5c7>] _spin_lock_irqsave+0x22/0x32
[<e09b6cd8>] mpi_start_xmit+0x79/0xdd [airo]
[<c05b5fc5>] dev_hard_start_xmit+0x19f/0x1fc
[<c05c48d8>] __qdisc_run+0xdd/0x197
[<c05b7a40>] dev_queue_xmit+0x12a/0x222
[<c060a98a>] packet_sendmsg_spkt+0x172/0x199
[<c05ac5df>] sock_sendmsg+0xe8/0x103
[<c05ad7a7>] sys_sendto+0xbe/0xdc
[<c05adf27>] sys_socketcall+0xfb/0x186
[<c0403f2f>] syscall_call+0x7/0xb
in-hardirq-W at:
[<c043c546>] lock_acquire+0x4b/0x6d
[<c060e5c7>] _spin_lock_irqsave+0x22/0x32
[<e09b7b6d>] airo_interrupt+0xe31/0xffb [airo]
[<c0451020>] handle_IRQ_event+0x20/0x4d
[<c04510e1>] __do_IRQ+0x94/0xef
[<c04066c8>] do_IRQ+0xb9/0xcd
[<c04049d1>] common_interrupt+0x25/0x2c
[<c04030aa>] cpu_idle+0xa7/0xc1
[<c0400591>] rest_init+0x23/0x26
[<c07a7810>] start_kernel+0x3a1/0x3a9
[<c0400210>] 0xc0400210
}
... key at: [<e09c2a80>] __key.24227+0x0/0xffff6704 [airo]
-> (&skb_queue_lock_key){-+..} ops: 0 {
initial-use at:
[<c043c546>] lock_acquire+0x4b/0x6d
[<c060e5c7>] _spin_lock_irqsave+0x22/0x32
[<c05b0d2d>] skb_queue_tail+0x14/0x32
[<c05c8a53>] netlink_broadcast+0x1bf/0x28e
[<c04e414b>] kobject_uevent+0x345/0x3b6
[<c055080d>] class_device_add+0x2a7/0x3e6
[<c0594d0c>] input_register_device+0x106/0x238
[<c059947a>] psmouse_connect+0x162/0x20f
[<c0590a09>] serio_connect_driver+0x1e/0x2e
[<c0590a2f>] serio_driver_probe+0x16/0x18
[<c054f9a6>] driver_probe_device+0x45/0x92
[<c054fad3>] __driver_attach+0x68/0x93
[<c054f420>] bus_for_each_dev+0x3a/0x5f
[<c054f901>] driver_attach+0x14/0x17
[<c054f0f7>] bus_add_driver+0x68/0x106
[<c054fda1>] driver_register+0x9d/0xa2
[<c0591522>] serio_thread+0x152/0x27c
[<c04365dc>] kthread+0xc3/0xef
[<c0402005>] kernel_thread_helper+0x5/0xb
in-softirq-W at:
[<c043c546>] lock_acquire+0x4b/0x6d
[<c060e5c7>] _spin_lock_irqsave+0x22/0x32
[<c05b0d2d>] skb_queue_tail+0x14/0x32
[<c05b05c4>] sock_queue_rcv_skb+0xe3/0x11f
[<c060adae>] packet_rcv_spkt+0x120/0x136
[<c05b5b86>] netif_receive_skb+0x1d4/0x26b
[<e09fa8e8>] e100_poll+0x15a/0x2fc [e100]
[<c05b7682>] net_rx_action+0xa6/0x1df
[<c0429809>] __do_softirq+0x78/0xf2
[<c04065ab>] do_softirq+0x5a/0xbe
hardirq-on-W at:
[<c043c546>] lock_acquire+0x4b/0x6d
[<c060e2c8>] _spin_lock_bh+0x1e/0x2d
[<c05ebe2f>] udp_ioctl+0x3b/0x6e
[<c05f08e7>] inet_ioctl+0x8c/0x91
[<c05acabc>] sock_ioctl+0x1b5/0x1d3
[<c0481e56>] do_ioctl+0x22/0x67
[<c04820f3>] vfs_ioctl+0x258/0x26b
[<c048214d>] sys_ioctl+0x47/0x62
[<c0403f2f>] syscall_call+0x7/0xb
}
... key at: [<c09b0748>] skb_queue_lock_key+0x0/0x18
... acquired at:
[<c043c546>] lock_acquire+0x4b/0x6d
[<c060e5c7>] _spin_lock_irqsave+0x22/0x32
[<c05b0d2d>] skb_queue_tail+0x14/0x32
[<e09b6ce8>] mpi_start_xmit+0x89/0xdd [airo]
[<c05b5fc5>] dev_hard_start_xmit+0x19f/0x1fc
[<c05c48d8>] __qdisc_run+0xdd/0x197
[<c05b7a40>] dev_queue_xmit+0x12a/0x222
[<c060a98a>] packet_sendmsg_spkt+0x172/0x199
[<c05ac5df>] sock_sendmsg+0xe8/0x103
[<c05ad7a7>] sys_sendto+0xbe/0xdc
[<c05adf27>] sys_socketcall+0xfb/0x186
[<c0403f2f>] syscall_call+0x7/0xb
stack backtrace:
[<c0405167>] show_trace_log_lvl+0x54/0xfd
[<c040571e>] show_trace+0xd/0x10
[<c040583d>] dump_stack+0x19/0x1b
[<c043aa70>] print_irq_inversion_bug+0xe1/0xee
[<c043ab6e>] check_usage_backwards+0x32/0x3b
[<c043ae49>] mark_lock+0x217/0x36a
[<c043ba86>] __lock_acquire+0x43e/0x98d
[<c043c546>] lock_acquire+0x4b/0x6d
[<c060e2c8>] _spin_lock_bh+0x1e/0x2d
[<c05ebe2f>] udp_ioctl+0x3b/0x6e
[<c05f08e7>] inet_ioctl+0x8c/0x91
[<c05acabc>] sock_ioctl+0x1b5/0x1d3
[<c0481e56>] do_ioctl+0x22/0x67
[<c04820f3>] vfs_ioctl+0x258/0x26b
[<c048214d>] sys_ioctl+0x47/0x62
[<c0403f2f>] syscall_call+0x7/0xb
--
http://www.codemonkey.org.uk
next reply other threads:[~2006-07-07 17:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-07 17:19 Dave Jones [this message]
2006-07-07 18:13 ` auro deadlock (was Re: e100 lockdep irq lock inversion.) Arjan van de Ven
2006-07-07 19:09 ` auro deadlock David Miller
2006-07-07 19:39 ` Arjan van de Ven
2006-07-10 6:59 ` Ingo Molnar
2006-07-08 3:06 ` auro deadlock (was Re: e100 lockdep irq lock inversion.) Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060707171916.GA16343@redhat.com \
--to=davej@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.