All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Seyfried <seife@suse.de>
To: BlueZ development <bluez-devel@lists.sourceforge.net>
Subject: Re: [Bluez-devel] kernel: hci_scodata_packet: hci1 SCO packet for	unknown connection handle 0
Date: Tue, 11 Jul 2006 15:39:56 +0200	[thread overview]
Message-ID: <20060711133956.GD13809@suse.de> (raw)
In-Reply-To: <1152617098.15028.16.camel@localhost>

Hi,

On Tue, Jul 11, 2006 at 01:24:58PM +0200, Marcel Holtmann wrote:
> Hi Stefan,
> =

> > i have an el-cheapo USB BT dongle in front of me that throws an endless
> > stream of
> > kernel: hci_scodata_packet: hci1 SCO packet for unknown connection hand=
le 0
> > after inserting it into the USB port, unless i do
> > echo 1 > /sys/module/hci_usb/parameters/isoc
> > =

> > I don't know about the usual practice in such cases: do those devices g=
et
> > blacklisted in the drivers? If yes, what information should i provide to
> > get it into the blacklist?
> =

> what does "hciconfig -a" tells you about this dongle? The content

root@strolchi:~# hciconfig -a hci1
hci1:   Type: USB
        BD Address: 00:0C:78:31:11:0A ACL MTU: 339:4 SCO MTU: 60:9
        UP RUNNING
        RX bytes:419 acl:0 sco:0 events:19 errors:0
        TX bytes:319 acl:0 sco:0 commands:17 errors:0
        Features: 0xff 0xff 0x81 0x00 0x18 0x18 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'BlueZ strolchi (1)'
        Class: 0x100100
        Service Classes:
        Device Class: Computer, Uncategorized
        HCI Ver: 1.2 (0x2) HCI Rev: 0x222 LMP Ver: 1.2 (0x2) LMP Subver: 0x=
222
        Manufacturer: RTX Telecom A/S (21)

> from /proc/bus/usb/devices for this device might also be helpful.

T:  Bus=3D02 Lev=3D01 Prnt=3D01 Port=3D00 Cnt=3D01 Dev#=3D  3 Spd=3D12  MxC=
h=3D 0
D:  Ver=3D 1.10 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 MxPS=3D 8 #Cfgs=3D  1
P:  Vendor=3D0400 ProdID=3D080a Rev=3D 1.00
C:* #Ifs=3D 2 Cfg#=3D 1 Atr=3D80 MxPwr=3D  0mA
I:  If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E:  Ad=3D81(I) Atr=3D03(Int.) MxPS=3D  64 Ivl=3D1ms
E:  Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D  64 Ivl=3D0ms
E:  Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D  64 Ivl=3D0ms
I:  If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D   0 Ivl=3D1ms
E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D   0 Ivl=3D1ms
I:  If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D   9 Ivl=3D1ms
E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D   9 Ivl=3D1ms
I:  If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D  17 Ivl=3D1ms
E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D  17 Ivl=3D1ms
I:  If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D  25 Ivl=3D1ms
E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D  25 Ivl=3D1ms
I:  If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D  33 Ivl=3D1ms
E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D  33 Ivl=3D1ms
I:  If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E:  Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D  49 Ivl=3D1ms
E:  Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D  49 Ivl=3D1ms

This is all with isoc=3D1, as otherwise my syslog fills quicker than i am
able to free space on my drive :-)


Thanks,

    Stefan
-- =

Stefan Seyfried                  \ "I didn't want to write for pay. I
QA / R&D Team Mobile Devices      \ wanted to be paid for what I write."
SUSE LINUX Products GmbH, N=FCrnberg \                    -- Leonard Cohen


-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easi=
er
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel

  reply	other threads:[~2006-07-11 13:39 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-07-07  9:42 [Bluez-devel] kernel: hci_scodata_packet: hci1 SCO packet for unknown connection handle 0 Stefan Seyfried
2006-07-11 11:24 ` Marcel Holtmann
2006-07-11 13:39   ` Stefan Seyfried [this message]
2006-07-11 13:46     ` Marcel Holtmann
2006-07-11 15:45       ` Stefan Seyfried
2006-07-14 13:54         ` Marcel Holtmann
2006-07-14 15:38           ` Stefan Seyfried
2006-07-18 14:28           ` Stefan Seyfried
2006-07-18 16:03             ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060711133956.GD13809@suse.de \
    --to=seife@suse.de \
    --cc=bluez-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.