From: Adrian Bunk <bunk@stusta.de>
To: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: akpm@osdl.org, B.Zolnierkiewicz@elka.pw.edu.pl,
linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [2.6 patch] drivers/ide/: cleanups
Date: Tue, 11 Jul 2006 17:19:33 +0200 [thread overview]
Message-ID: <20060711151933.GT13938@stusta.de> (raw)
In-Reply-To: <44B3B7E8.3080800@ru.mvista.com>
On Tue, Jul 11, 2006 at 06:38:32PM +0400, Sergei Shtylyov wrote:
> Hello.
>
> Adrian Bunk wrote:
>
> >This patch contains the following clenups:
> >- setup-pci.c: #if 0 the unused ide_pci_unregister_driver()
> >- ide.c: remove the unused EXPORT_SYMBOL(ide_register_hw)
>
> It's used by arm/bast-ide.c (CONFIG_NLK_DEV_IDE_BAST is defined as
> tristate).
Sorry, my fault.
I did grep and check the options, but it seems I missed this one.
Updated patch below.
> I don't understand what's the point insisting on its removal
> since any SOC modular driver in the future may need it...
There are two points:
- re-adding is trivial if it's ever needed, but until then it only
bloats the kernel
- drivers/ide/ are the legacy IDE drivers that will be superseded
by libata
>...
> WBR, Sergei
cu
Adrian
<-- snip -->
This patch contains the following clenups:
- setup-pci.c: #if 0 the unused ide_pci_unregister_driver()
- ide-dma.c: remove the unused EXPORT_SYMBOL_GPL(ide_in_drive_list)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
drivers/ide/ide-dma.c | 2 --
drivers/ide/setup-pci.c | 4 +++-
include/linux/ide.h | 1 -
3 files changed, 3 insertions(+), 4 deletions(-)
--- linux-2.6.17-rc1-mm2-full/include/linux/ide.h.old 2006-04-10 22:46:27.000000000 +0200
+++ linux-2.6.17-rc1-mm2-full/include/linux/ide.h 2006-04-10 22:46:36.000000000 +0200
@@ -1188,7 +1188,6 @@
extern void ide_scan_pcibus(int scan_direction) __init;
extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner);
#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE)
-extern void ide_pci_unregister_driver(struct pci_driver *driver);
void ide_pci_setup_ports(struct pci_dev *, struct ide_pci_device_s *, int, ata_index_t *);
extern void ide_setup_pci_noise (struct pci_dev *dev, struct ide_pci_device_s *d);
--- linux-2.6.17-rc1-mm2-full/drivers/ide/ide-dma.c.old 2006-04-10 22:44:21.000000000 +0200
+++ linux-2.6.17-rc1-mm2-full/drivers/ide/ide-dma.c 2006-04-10 22:44:28.000000000 +0200
@@ -152,8 +152,6 @@
return 0;
}
-EXPORT_SYMBOL_GPL(ide_in_drive_list);
-
/**
* ide_dma_intr - IDE DMA interrupt handler
* @drive: the drive the interrupt is for
--- linux-2.6.17-rc1-mm2-full/drivers/ide/setup-pci.c.old 2006-04-10 22:46:46.000000000 +0200
+++ linux-2.6.17-rc1-mm2-full/drivers/ide/setup-pci.c 2006-04-10 22:47:03.000000000 +0200
@@ -807,7 +807,8 @@
* Unregister a currently installed IDE driver. Returns are the same
* as for pci_unregister_driver
*/
-
+
+#if 0
void ide_pci_unregister_driver(struct pci_driver *driver)
{
if(!pre_init)
@@ -817,6 +818,7 @@
}
EXPORT_SYMBOL_GPL(ide_pci_unregister_driver);
+#endif /* 0 */
/**
* ide_scan_pcidev - find an IDE driver for a device
next prev parent reply other threads:[~2006-07-11 15:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-11 14:16 [2.6 patch] drivers/ide/: cleanups Adrian Bunk
2006-07-11 14:30 ` Michael Tokarev
2006-07-11 14:33 ` Arjan van de Ven
2006-07-11 16:20 ` Alan Cox
2006-07-15 0:37 ` Adrian Bunk
2006-07-11 14:38 ` Sergei Shtylyov
2006-07-11 15:19 ` Adrian Bunk [this message]
2006-07-11 16:19 ` Alan Cox
2006-07-11 16:07 ` Adrian Bunk
2006-07-14 10:43 ` Benjamin Herrenschmidt
2006-07-14 16:33 ` Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060711151933.GT13938@stusta.de \
--to=bunk@stusta.de \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=akpm@osdl.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sshtylyov@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.