From: "Clément Stenac" <zorglub@diwi.org>
To: kernel-janitors@vger.kernel.org
Subject: [KJ] [PATCH] Use standard min/max macros [1/3]
Date: Mon, 31 Jul 2006 22:13:29 +0000 [thread overview]
Message-ID: <20060731221329.GA31140@diwi.org> (raw)
Remove some custom type-unsafe MIN/MAX macros in favor of type-checking
min/max from kernel.h
Signed-off-by: Clément Stenac <zorglub@diwi.org>
---
This is my very first patch submission, reviews are welcome.
As this patch switches to type-checking macros, it reveals a number of
warnings due to bogus comparisons (mostly signed/unsigned). I plan to do
another set of patches for some of these.
diff --git a/drivers/isdn/hardware/eicon/debug.c b/drivers/isdn/hardware/eicon/debug.c
index 6851c62..f55d679 100644
--- a/drivers/isdn/hardware/eicon/debug.c
+++ b/drivers/isdn/hardware/eicon/debug.c
@@ -756,14 +756,14 @@ int diva_get_driver_info (dword id, byte
data_length -= 9;
- if ((to_copy = MIN(strlen(clients[id].drvName), data_length-1))) {
+ if ((to_copy = min(strlen(clients[id].drvName), data_length-1))) {
memcpy (p, clients[id].drvName, to_copy);
p += to_copy;
data_length -= to_copy;
if ((data_length >= 4) && clients[id].hDbg->drvTag[0]) {
*p++ = '(';
data_length -= 1;
- if ((to_copy = MIN(strlen(clients[id].hDbg->drvTag), data_length-2))) {
+ if ((to_copy = min(strlen(clients[id].hDbg->drvTag), data_length-2))) {
memcpy (p, clients[id].hDbg->drvTag, to_copy);
p += to_copy;
data_length -= to_copy;
diff --git a/drivers/isdn/hardware/eicon/di.c b/drivers/isdn/hardware/eicon/di.c
index 0617d7c..6e65d2c 100644
--- a/drivers/isdn/hardware/eicon/di.c
+++ b/drivers/isdn/hardware/eicon/di.c
@@ -133,7 +133,7 @@ #endif
i = this->XCurrent;
X = PTR_X(a,this);
while(i<this->XNum && length<270) {
- clength = MIN((word)(270-length),X[i].PLength-this->XOffset);
+ clength = min((word)(270-length),X[i].PLength-this->XOffset);
a->ram_out_buffer(a,
&ReqOut->XBuffer.P[length],
PTR_P(a,this,&X[i].P[this->XOffset]),
@@ -622,7 +622,7 @@ #endif
sizeof(a->stream_buffer),
&final, NULL, NULL);
}
- IoAdapter->RBuffer.length = MIN(MLength, 270);
+ IoAdapter->RBuffer.length = min(MLength, 270);
if (IoAdapter->RBuffer.length != MLength) {
this->complete = 0;
} else {
@@ -676,9 +676,9 @@ #endif
this->RCurrent++;
}
if (cma) {
- clength = MIN(MLength, R[this->RCurrent].PLength-this->ROffset);
+ clength = min(MLength, R[this->RCurrent].PLength-this->ROffset);
} else {
- clength = MIN(a->ram_inw(a, &RBuffer->length)-offset,
+ clength = min(a->ram_inw(a, &RBuffer->length)-offset,
R[this->RCurrent].PLength-this->ROffset);
}
if(R[this->RCurrent].P) {
diff --git a/drivers/isdn/hardware/eicon/io.c b/drivers/isdn/hardware/eicon/io.c
index 4a27e23..7e197c7 100644
--- a/drivers/isdn/hardware/eicon/io.c
+++ b/drivers/isdn/hardware/eicon/io.c
@@ -262,7 +262,7 @@ #endif
case IDI_SYNC_REQ_XDI_GET_CAPI_PARAMS: {
diva_xdi_get_capi_parameters_t prms, *pI = &syncReq->xdi_capi_prms.info;
memset (&prms, 0x00, sizeof(prms));
- prms.structure_length = MIN(sizeof(prms), pI->structure_length);
+ prms.structure_length = min(sizeof(prms), pI->structure_length);
memset (pI, 0x00, pI->structure_length);
prms.flag_dynamic_l1_down = (IoAdapter->capi_cfg.cfg_1 & \
DIVA_XDI_CAPI_CFG_1_DYNAMIC_L1_ON) ? 1 : 0;
diff --git a/drivers/isdn/hardware/eicon/istream.c b/drivers/isdn/hardware/eicon/istream.c
index 2313966..87133db 100644
--- a/drivers/isdn/hardware/eicon/istream.c
+++ b/drivers/isdn/hardware/eicon/istream.c
@@ -92,7 +92,7 @@ #endif
return (-1); /* was not able to write */
break; /* only part of message was written */
}
- to_write = MIN(length, DIVA_DFIFO_DATA_SZ);
+ to_write = min(length, DIVA_DFIFO_DATA_SZ);
if (to_write) {
a->ram_out_buffer (a,
#ifdef PLATFORM_GT_32BIT
@@ -176,7 +176,7 @@ #endif
return (-1); /* was not able to read */
break;
}
- to_read = MIN(max_length, tmp[1]);
+ to_read = min(max_length, tmp[1]);
if (to_read) {
a->ram_in_buffer(a,
#ifdef PLATFORM_GT_32BIT
diff --git a/drivers/isdn/hardware/eicon/platform.h b/drivers/isdn/hardware/eicon/platform.h
index a66836c..2444811 100644
--- a/drivers/isdn/hardware/eicon/platform.h
+++ b/drivers/isdn/hardware/eicon/platform.h
@@ -83,14 +83,6 @@ #ifndef NULL
#define NULL ((void *) 0)
#endif
-#ifndef MIN
-#define MIN(a,b) ((a)>(b) ? (b) : (a))
-#endif
-
-#ifndef MAX
-#define MAX(a,b) ((a)>(b) ? (a) : (b))
-#endif
-
#ifndef far
#define far
#endif
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index 567efff..6d943df 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -270,13 +270,6 @@ static struct pci_device_id cpc_pci_dev_
};
MODULE_DEVICE_TABLE(pci, cpc_pci_dev_id);
-#ifndef cpc_min
-#define cpc_min(a,b) (((a)<(b))?(a):(b))
-#endif
-#ifndef cpc_max
-#define cpc_max(a,b) (((a)>(b))?(a):(b))
-#endif
-
/* prototypes */
static void tx_dma_buf_pt_init(pc300_t *, int);
static void tx_dma_buf_init(pc300_t *, int);
@@ -477,7 +470,7 @@ static int dma_buf_write(pc300_t * card,
for (i = 0; i < nbuf; i++) {
ptdescr = (card->hw.rambase +
TX_BD_ADDR(ch, card->chan[ch].tx_next_bd));
- nchar = cpc_min(BD_DEF_LEN, tosend);
+ nchar = min(BD_DEF_LEN, tosend);
if (cpc_readb(&ptdescr->status) & DST_OSB) {
memcpy_toio((card->hw.rambase + cpc_readl(&ptdescr->ptbuf)),
&ptdata[len - tosend], nchar);
diff --git a/include/net/irda/irda.h b/include/net/irda/irda.h
index 1cb0607..35918be 100644
--- a/include/net/irda/irda.h
+++ b/include/net/irda/irda.h
@@ -46,10 +46,6 @@ #ifndef SMALL
#define SMALL 5
#endif
-#ifndef IRDA_MIN /* Lets not mix this MIN with other header files */
-#define IRDA_MIN(a, b) (((a) < (b)) ? (a) : (b))
-#endif
-
#ifndef IRDA_ALIGN
# define IRDA_ALIGN __attribute__((aligned))
#endif
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index 3bcdb46..584752d 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -854,7 +854,7 @@ static void ircomm_tty_wait_until_sent(s
orig_jiffies = jiffies;
/* Set poll time to 200 ms */
- poll_time = IRDA_MIN(timeout, msecs_to_jiffies(200));
+ poll_time = min(timeout, msecs_to_jiffies(200));
spin_lock_irqsave(&self->spinlock, flags);
while (self->tx_skb && self->tx_skb->len) {
@@ -1201,7 +1201,7 @@ static int ircomm_tty_control_indication
clen = skb->data[0];
- irda_param_extract_all(self, skb->data+1, IRDA_MIN(skb->len-1, clen),
+ irda_param_extract_all(self, skb->data+1, min(skb->len-1, clen),
&ircomm_param_info);
/* No need to kfree_skb - see ircomm_control_indication() */
diff --git a/net/irda/ircomm/ircomm_tty_attach.c b/net/irda/ircomm/ircomm_tty_attach.c
index 99f5edd..539293e 100644
--- a/net/irda/ircomm/ircomm_tty_attach.c
+++ b/net/irda/ircomm/ircomm_tty_attach.c
@@ -543,7 +543,7 @@ void ircomm_tty_connect_indication(void
clen = skb->data[0];
if (clen)
irda_param_extract_all(self, skb->data+1,
- IRDA_MIN(skb->len, clen),
+ min(skb->len, clen),
&ircomm_param_info);
ircomm_tty_do_event(self, IRCOMM_TTY_CONNECT_INDICATION, NULL, NULL);
diff --git a/net/irda/irlap_frame.c b/net/irda/irlap_frame.c
index ccb983b..73cfd18 100644
--- a/net/irda/irlap_frame.c
+++ b/net/irda/irlap_frame.c
@@ -378,7 +378,7 @@ void irlap_send_discovery_xid_frame(stru
info = skb_put(tx_skb, 1);
info[0] = discovery->data.charset;
- len = IRDA_MIN(discovery->name_len, skb_tailroom(tx_skb));
+ len = min(discovery->name_len, skb_tailroom(tx_skb));
info = skb_put(tx_skb, len);
memcpy(info, discovery->data.info, len);
}
diff --git a/net/irda/irttp.c b/net/irda/irttp.c
index 42acf1c..3a2480e 100644
--- a/net/irda/irttp.c
+++ b/net/irda/irttp.c
@@ -1216,7 +1216,7 @@ static void irttp_connect_confirm(void *
plen = skb->data[0];
ret = irda_param_extract_all(self, skb->data+1,
- IRDA_MIN(skb->len-1, plen),
+ min(skb->len-1, plen),
¶m_info);
/* Any errors in the parameter list? */
@@ -1229,7 +1229,7 @@ static void irttp_connect_confirm(void *
return;
}
/* Remove parameters */
- skb_pull(skb, IRDA_MIN(skb->len, plen+1));
+ skb_pull(skb, min(skb->len, plen+1));
}
IRDA_DEBUG(4, "%s() send=%d,avail=%d,remote=%d\n", __FUNCTION__,
@@ -1293,7 +1293,7 @@ void irttp_connect_indication(void *inst
plen = skb->data[0];
ret = irda_param_extract_all(self, skb->data+1,
- IRDA_MIN(skb->len-1, plen),
+ min(skb->len-1, plen),
¶m_info);
/* Any errors in the parameter list? */
@@ -1307,7 +1307,7 @@ void irttp_connect_indication(void *inst
}
/* Remove parameters */
- skb_pull(skb, IRDA_MIN(skb->len, plen+1));
+ skb_pull(skb, min(skb->len, plen+1));
}
if (self->notify.connect_indication) {
_______________________________________________
Kernel-janitors mailing list
Kernel-janitors@lists.osdl.org
https://lists.osdl.org/mailman/listinfo/kernel-janitors
next reply other threads:[~2006-07-31 22:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-31 22:13 Clément Stenac [this message]
2006-07-31 22:25 ` [KJ] [PATCH] Use standard min/max macros [2/3] Clément Stenac
2006-07-31 22:26 ` [KJ] [PATCH] Use standard min/max macros [3/3] Clément Stenac
2006-08-01 1:55 ` Alexey Dobriyan
2006-08-02 19:57 ` Clément Stenac
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060731221329.GA31140@diwi.org \
--to=zorglub@diwi.org \
--cc=kernel-janitors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.