From: Dmitry Torokhov <dtor@insightbb.com>
To: linux-kernel@vger.kernel.org
Cc: rpurdie@rpsys.net, lenz@cs.wisc.edu, rmk@arm.linux.org.uk,
Pavel Machek <pavel@ucw.cz>
Subject: [PATCH] ucb1x00-ts: handle errors from input_register_device()
Date: Tue, 1 Aug 2006 23:01:11 -0400 [thread overview]
Message-ID: <200608012301.13155.dtor@insightbb.com> (raw)
I have not tested this (no hardware)
--
Dmitry
Subject: ucb1x00-ts - handle errors from input_register_device()
ucb1x00-ts: handle errors from input_register_device()
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/mfd/ucb1x00-ts.c | 49 ++++++++++++++++++++++++++++-------------------
1 files changed, 30 insertions(+), 19 deletions(-)
Index: work/drivers/mfd/ucb1x00-ts.c
===================================================================
--- work.orig/drivers/mfd/ucb1x00-ts.c
+++ work/drivers/mfd/ucb1x00-ts.c
@@ -58,6 +58,7 @@ static int adcsync;
static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y)
{
struct input_dev *idev = ts->idev;
+
input_report_abs(idev, ABS_X, x);
input_report_abs(idev, ABS_Y, y);
input_report_abs(idev, ABS_PRESSURE, pressure);
@@ -67,6 +68,7 @@ static inline void ucb1x00_ts_evt_add(st
static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts)
{
struct input_dev *idev = ts->idev;
+
input_report_abs(idev, ABS_PRESSURE, 0);
input_sync(idev);
}
@@ -189,6 +191,7 @@ static inline unsigned int ucb1x00_ts_re
static inline int ucb1x00_ts_pen_down(struct ucb1x00_ts *ts)
{
unsigned int val = ucb1x00_reg_read(ts->ucb, UCB_TS_CR);
+
if (machine_is_collie())
return (!(val & (UCB_TS_CR_TSPX_LOW)));
else
@@ -291,6 +294,7 @@ static int ucb1x00_thread(void *_ts)
static void ucb1x00_ts_irq(int idx, void *id)
{
struct ucb1x00_ts *ts = id;
+
ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING);
wake_up(&ts->irq_wait);
}
@@ -372,36 +376,43 @@ static int ucb1x00_ts_resume(struct ucb1
static int ucb1x00_ts_add(struct ucb1x00_dev *dev)
{
struct ucb1x00_ts *ts;
+ struct input_dev *idev;
+ int err;
ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL);
- if (!ts)
- return -ENOMEM;
-
- ts->idev = input_allocate_device();
- if (!ts->idev) {
- kfree(ts);
- return -ENOMEM;
+ idev = input_allocate_device();
+ if (!ts || !idev) {
+ err = -ENOMEM;
+ goto fail;
}
ts->ucb = dev->ucb;
+ ts->idev = idev;
ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
- ts->idev->private = ts;
- ts->idev->name = "Touchscreen panel";
- ts->idev->id.product = ts->ucb->id;
- ts->idev->open = ucb1x00_ts_open;
- ts->idev->close = ucb1x00_ts_close;
-
- __set_bit(EV_ABS, ts->idev->evbit);
- __set_bit(ABS_X, ts->idev->absbit);
- __set_bit(ABS_Y, ts->idev->absbit);
- __set_bit(ABS_PRESSURE, ts->idev->absbit);
-
- input_register_device(ts->idev);
+ idev->private = ts;
+ idev->name = "Touchscreen panel";
+ idev->id.product = ts->ucb->id;
+ idev->open = ucb1x00_ts_open;
+ idev->close = ucb1x00_ts_close;
+
+ __set_bit(EV_ABS, idev->evbit);
+ __set_bit(ABS_X, idev->absbit);
+ __set_bit(ABS_Y, idev->absbit);
+ __set_bit(ABS_PRESSURE, idev->absbit);
+
+ err = input_register_device(idev);
+ if (err)
+ goto fail;
dev->priv = ts;
return 0;
+
+ fail:
+ input_free_device(idev);
+ kfree(ts);
+ return err;
}
static void ucb1x00_ts_remove(struct ucb1x00_dev *dev)
next reply other threads:[~2006-08-02 3:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-02 3:01 Dmitry Torokhov [this message]
2006-08-04 20:39 ` [PATCH] ucb1x00-ts: handle errors from input_register_device() Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200608012301.13155.dtor@insightbb.com \
--to=dtor@insightbb.com \
--cc=lenz@cs.wisc.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=rmk@arm.linux.org.uk \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.