From: Jeremy Fitzhardinge <jeremy@xensource.com>
To: akpm@osdl.org
Cc: linux-kernel@vger.kernel.org, virtualization@lists.osdl.org,
xen-devel@lists.xensource.com,
Jeremy Fitzhardinge <jeremy@goop.org>,
Rusty Russell <rusty@rustcorp.com.au>
Subject: [patch 4/8] Replace sensitive instructions with macros.
Date: Wed, 02 Aug 2006 17:25:14 -0700 [thread overview]
Message-ID: <20060803002518.298650539@xensource.com> (raw)
In-Reply-To: 20060803002510.634721860@xensource.com
[-- Attachment #1: 004-abstract-asm.patch --]
[-- Type: text/plain, Size: 5230 bytes --]
Abstract sensitive instructions in assembler code, replacing them with
macros (which currently are #defined to the native versions). We use
long names: assembler is case-insensitive, so if something goes wrong
and macros do not expand, it would assemble anyway.
Resulting object files are exactly the same as before.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
---
arch/i386/kernel/entry.S | 38 ++++++++++++++++++++++----------------
include/asm-i386/spinlock.h | 7 +++++--
2 files changed, 27 insertions(+), 18 deletions(-)
===================================================================
--- a/arch/i386/kernel/entry.S
+++ b/arch/i386/kernel/entry.S
@@ -76,8 +76,15 @@ NT_MASK = 0x00004000
NT_MASK = 0x00004000
VM_MASK = 0x00020000
+/* These are replaces for paravirtualization */
+#define DISABLE_INTERRUPTS cli
+#define ENABLE_INTERRUPTS sti
+#define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit
+#define INTERRUPT_RETURN iret
+#define GET_CR0_INTO_EAX movl %cr0, %eax
+
#ifdef CONFIG_PREEMPT
-#define preempt_stop cli; TRACE_IRQS_OFF
+#define preempt_stop DISABLE_INTERRUPTS; TRACE_IRQS_OFF
#else
#define preempt_stop
#define resume_kernel restore_nocheck
@@ -233,7 +240,7 @@ check_userspace:
cmpl $SEGMENT_RPL_MASK, %eax
jb resume_kernel # not returning to v8086 or userspace
ENTRY(resume_userspace)
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
movl TI_flags(%ebp), %ecx
@@ -244,7 +251,7 @@ ENTRY(resume_userspace)
#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
- cli
+ DISABLE_INTERRUPTS
cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ?
jnz restore_nocheck
need_resched:
@@ -272,7 +279,7 @@ sysenter_past_esp:
* No need to follow this irqs on/off section: the syscall
* disabled irqs and here we enable it straight after entry:
*/
- sti
+ ENABLE_INTERRUPTS
pushl $(__USER_DS)
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET ss, 0*/
@@ -317,7 +324,7 @@ 1: movl (%ebp),%ebp
jae syscall_badsys
call *sys_call_table(,%eax,4)
movl %eax,EAX(%esp)
- cli
+ DISABLE_INTERRUPTS
TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx
@@ -327,8 +334,7 @@ 1: movl (%ebp),%ebp
movl OLDESP(%esp), %ecx
xorl %ebp,%ebp
TRACE_IRQS_ON
- sti
- sysexit
+ ENABLE_INTERRUPTS_SYSEXIT
CFI_ENDPROC
@@ -353,7 +359,7 @@ syscall_call:
call *sys_call_table(,%eax,4)
movl %eax,EAX(%esp) # store the return value
syscall_exit:
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
TRACE_IRQS_OFF
@@ -378,11 +384,11 @@ restore_nocheck_notrace:
RESTORE_REGS
addl $4, %esp
CFI_ADJUST_CFA_OFFSET -4
-1: iret
+1: INTERRUPT_RETURN
.section .fixup,"ax"
iret_exc:
TRACE_IRQS_ON
- sti
+ ENABLE_INTERRUPTS
pushl $0 # no error code
pushl $do_iret_error
jmp error_code
@@ -406,7 +412,7 @@ ldt_ss:
* dosemu and wine happy. */
subl $8, %esp # reserve space for switch16 pointer
CFI_ADJUST_CFA_OFFSET 8
- cli
+ DISABLE_INTERRUPTS
TRACE_IRQS_OFF
movl %esp, %eax
/* Set up the 16bit stack frame with switch32 pointer on top,
@@ -416,7 +422,7 @@ ldt_ss:
TRACE_IRQS_IRET
RESTORE_REGS
lss 20+4(%esp), %esp # switch to 16bit stack
-1: iret
+1: INTERRUPT_RETURN
.section __ex_table,"a"
.align 4
.long 1b,iret_exc
@@ -431,7 +437,7 @@ work_pending:
jz work_notifysig
work_resched:
call schedule
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
TRACE_IRQS_OFF
@@ -487,7 +493,7 @@ syscall_exit_work:
testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
jz work_pending
TRACE_IRQS_ON
- sti # could let do_syscall_trace() call
+ ENABLE_INTERRUPTS # could let do_syscall_trace() call
# schedule() instead
movl %esp, %eax
movl $1, %edx
@@ -666,7 +672,7 @@ ENTRY(device_not_available)
pushl $-1 # mark this as an int
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
- movl %cr0, %eax
+ GET_CR0_INTO_EAX
testl $0x4, %eax # EM (math emulation bit)
jne device_not_available_emulate
preempt_stop
@@ -796,7 +802,7 @@ nmi_16bit_stack:
call do_nmi
RESTORE_REGS
lss 12+4(%esp), %esp # back to 16bit stack
-1: iret
+1: INTERRUPT_RETURN
CFI_ENDPROC
.section __ex_table,"a"
.align 4
===================================================================
--- a/include/asm-i386/spinlock.h
+++ b/include/asm-i386/spinlock.h
@@ -16,6 +16,9 @@
*
* (the type definitions are in asm/spinlock_types.h)
*/
+
+#define CLI_STRING "cli"
+#define STI_STRING "sti"
#define __raw_spin_is_locked(x) \
(*(volatile signed char *)(&(x)->slock) <= 0)
@@ -43,12 +46,12 @@
"2:\t" \
"testl $0x200, %1\n\t" \
"jz 4f\n\t" \
- "sti\n" \
+ STI_STRING "\n" \
"3:\t" \
"rep;nop\n\t" \
"cmpb $0, %0\n\t" \
"jle 3b\n\t" \
- "cli\n\t" \
+ CLI_STRING "\n\t" \
"jmp 1b\n" \
"4:\t" \
"rep;nop\n\t" \
--
WARNING: multiple messages have this Message-ID (diff)
From: Jeremy Fitzhardinge <jeremy@xensource.com>
To: akpm@osdl.org
Cc: virtualization@lists.osdl.org,
Jeremy Fitzhardinge <jeremy@goop.org>,
xen-devel@lists.xensource.com, linux-kernel@vger.kernel.org,
Rusty Russell <rusty@rustcorp.com.au>
Subject: [patch 4/8] Replace sensitive instructions with macros.
Date: Wed, 02 Aug 2006 17:25:14 -0700 [thread overview]
Message-ID: <20060803002518.298650539@xensource.com> (raw)
In-Reply-To: 20060803002510.634721860@xensource.com
[-- Attachment #1: 004-abstract-asm.patch --]
[-- Type: text/plain, Size: 5229 bytes --]
Abstract sensitive instructions in assembler code, replacing them with
macros (which currently are #defined to the native versions). We use
long names: assembler is case-insensitive, so if something goes wrong
and macros do not expand, it would assemble anyway.
Resulting object files are exactly the same as before.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
---
arch/i386/kernel/entry.S | 38 ++++++++++++++++++++++----------------
include/asm-i386/spinlock.h | 7 +++++--
2 files changed, 27 insertions(+), 18 deletions(-)
===================================================================
--- a/arch/i386/kernel/entry.S
+++ b/arch/i386/kernel/entry.S
@@ -76,8 +76,15 @@ NT_MASK = 0x00004000
NT_MASK = 0x00004000
VM_MASK = 0x00020000
+/* These are replaces for paravirtualization */
+#define DISABLE_INTERRUPTS cli
+#define ENABLE_INTERRUPTS sti
+#define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit
+#define INTERRUPT_RETURN iret
+#define GET_CR0_INTO_EAX movl %cr0, %eax
+
#ifdef CONFIG_PREEMPT
-#define preempt_stop cli; TRACE_IRQS_OFF
+#define preempt_stop DISABLE_INTERRUPTS; TRACE_IRQS_OFF
#else
#define preempt_stop
#define resume_kernel restore_nocheck
@@ -233,7 +240,7 @@ check_userspace:
cmpl $SEGMENT_RPL_MASK, %eax
jb resume_kernel # not returning to v8086 or userspace
ENTRY(resume_userspace)
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
movl TI_flags(%ebp), %ecx
@@ -244,7 +251,7 @@ ENTRY(resume_userspace)
#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
- cli
+ DISABLE_INTERRUPTS
cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ?
jnz restore_nocheck
need_resched:
@@ -272,7 +279,7 @@ sysenter_past_esp:
* No need to follow this irqs on/off section: the syscall
* disabled irqs and here we enable it straight after entry:
*/
- sti
+ ENABLE_INTERRUPTS
pushl $(__USER_DS)
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET ss, 0*/
@@ -317,7 +324,7 @@ 1: movl (%ebp),%ebp
jae syscall_badsys
call *sys_call_table(,%eax,4)
movl %eax,EAX(%esp)
- cli
+ DISABLE_INTERRUPTS
TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx
@@ -327,8 +334,7 @@ 1: movl (%ebp),%ebp
movl OLDESP(%esp), %ecx
xorl %ebp,%ebp
TRACE_IRQS_ON
- sti
- sysexit
+ ENABLE_INTERRUPTS_SYSEXIT
CFI_ENDPROC
@@ -353,7 +359,7 @@ syscall_call:
call *sys_call_table(,%eax,4)
movl %eax,EAX(%esp) # store the return value
syscall_exit:
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
TRACE_IRQS_OFF
@@ -378,11 +384,11 @@ restore_nocheck_notrace:
RESTORE_REGS
addl $4, %esp
CFI_ADJUST_CFA_OFFSET -4
-1: iret
+1: INTERRUPT_RETURN
.section .fixup,"ax"
iret_exc:
TRACE_IRQS_ON
- sti
+ ENABLE_INTERRUPTS
pushl $0 # no error code
pushl $do_iret_error
jmp error_code
@@ -406,7 +412,7 @@ ldt_ss:
* dosemu and wine happy. */
subl $8, %esp # reserve space for switch16 pointer
CFI_ADJUST_CFA_OFFSET 8
- cli
+ DISABLE_INTERRUPTS
TRACE_IRQS_OFF
movl %esp, %eax
/* Set up the 16bit stack frame with switch32 pointer on top,
@@ -416,7 +422,7 @@ ldt_ss:
TRACE_IRQS_IRET
RESTORE_REGS
lss 20+4(%esp), %esp # switch to 16bit stack
-1: iret
+1: INTERRUPT_RETURN
.section __ex_table,"a"
.align 4
.long 1b,iret_exc
@@ -431,7 +437,7 @@ work_pending:
jz work_notifysig
work_resched:
call schedule
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
TRACE_IRQS_OFF
@@ -487,7 +493,7 @@ syscall_exit_work:
testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
jz work_pending
TRACE_IRQS_ON
- sti # could let do_syscall_trace() call
+ ENABLE_INTERRUPTS # could let do_syscall_trace() call
# schedule() instead
movl %esp, %eax
movl $1, %edx
@@ -666,7 +672,7 @@ ENTRY(device_not_available)
pushl $-1 # mark this as an int
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
- movl %cr0, %eax
+ GET_CR0_INTO_EAX
testl $0x4, %eax # EM (math emulation bit)
jne device_not_available_emulate
preempt_stop
@@ -796,7 +802,7 @@ nmi_16bit_stack:
call do_nmi
RESTORE_REGS
lss 12+4(%esp), %esp # back to 16bit stack
-1: iret
+1: INTERRUPT_RETURN
CFI_ENDPROC
.section __ex_table,"a"
.align 4
===================================================================
--- a/include/asm-i386/spinlock.h
+++ b/include/asm-i386/spinlock.h
@@ -16,6 +16,9 @@
*
* (the type definitions are in asm/spinlock_types.h)
*/
+
+#define CLI_STRING "cli"
+#define STI_STRING "sti"
#define __raw_spin_is_locked(x) \
(*(volatile signed char *)(&(x)->slock) <= 0)
@@ -43,12 +46,12 @@
"2:\t" \
"testl $0x200, %1\n\t" \
"jz 4f\n\t" \
- "sti\n" \
+ STI_STRING "\n" \
"3:\t" \
"rep;nop\n\t" \
"cmpb $0, %0\n\t" \
"jle 3b\n\t" \
- "cli\n\t" \
+ CLI_STRING "\n\t" \
"jmp 1b\n" \
"4:\t" \
"rep;nop\n\t" \
--
next prev parent reply other threads:[~2006-08-03 0:26 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-03 0:25 [patch 0/8] Basic infrastructure patches for a paravirtualized kernel Jeremy Fitzhardinge
2006-08-03 0:25 ` Jeremy Fitzhardinge
2006-08-03 0:25 ` [patch 1/8] Remove locally-defined ldt structure in favour of standard type Jeremy Fitzhardinge
2006-08-03 0:25 ` [patch 2/8] Implement always-locked bit ops, for memory shared with an SMP hypervisor Jeremy Fitzhardinge
2006-08-03 0:25 ` Jeremy Fitzhardinge
2006-08-03 0:28 ` Christoph Lameter
2006-08-03 0:35 ` Jeremy Fitzhardinge
2006-08-03 1:06 ` Christoph Lameter
2006-08-03 1:18 ` Zachary Amsden
2006-08-03 1:18 ` Zachary Amsden
2006-08-03 1:25 ` Christoph Lameter
2006-08-03 3:55 ` Andi Kleen
2006-08-03 3:55 ` Andi Kleen
2006-08-03 4:25 ` Christoph Lameter
2006-08-03 4:47 ` Andi Kleen
2006-08-03 4:47 ` Andi Kleen
2006-08-03 2:45 ` Andi Kleen
2006-08-03 2:45 ` Andi Kleen
2006-08-03 4:27 ` Christoph Lameter
2006-08-03 4:49 ` Andi Kleen
2006-08-03 5:19 ` Christoph Lameter
2006-08-03 5:25 ` Andi Kleen
2006-08-03 5:25 ` Andi Kleen
2006-08-03 5:32 ` Christoph Lameter
2006-08-03 5:39 ` Andi Kleen
2006-08-03 5:39 ` Andi Kleen
2006-08-03 5:54 ` Christoph Lameter
2006-08-03 6:02 ` Andi Kleen
2006-08-03 16:49 ` Christoph Lameter
2006-08-03 17:18 ` Chris Wright
2006-08-03 17:18 ` Chris Wright
2006-08-04 0:47 ` Andi Kleen
2006-08-04 2:16 ` Christoph Lameter
2006-08-03 0:25 ` [patch 3/8] Allow a kernel to not be in ring 0 Jeremy Fitzhardinge
2006-08-03 0:25 ` Jeremy Fitzhardinge [this message]
2006-08-03 0:25 ` [patch 4/8] Replace sensitive instructions with macros Jeremy Fitzhardinge
2006-08-03 0:25 ` [patch 5/8] Roll all the cpuid asm into one __cpuid call Jeremy Fitzhardinge
2006-08-03 0:25 ` [patch 6/8] Make __FIXADDR_TOP variable to allow it to make space for a hypervisor Jeremy Fitzhardinge
2006-08-03 0:25 ` [patch 7/8] Add a bootparameter to reserve high linear address space Jeremy Fitzhardinge
1970-01-01 0:15 ` Pavel Machek
2006-08-07 2:10 ` Andi Kleen
2006-08-07 2:10 ` Andi Kleen
2010-05-04 23:37 ` Jeremy Fitzhardinge
2010-05-04 23:37 ` Jeremy Fitzhardinge
2006-08-03 6:19 ` Andrew Morton
2006-08-03 7:33 ` Zachary Amsden
2006-08-03 7:33 ` Zachary Amsden
2006-08-03 7:41 ` Andrew Morton
2006-08-03 8:58 ` Zachary Amsden
2006-08-03 8:58 ` Zachary Amsden
2006-08-05 21:58 ` Andrew Morton
2006-08-05 21:58 ` Andrew Morton
2006-08-05 22:52 ` Zachary Amsden
2006-08-05 22:52 ` Zachary Amsden
2006-08-05 23:17 ` Rusty Russell
2006-08-05 23:17 ` Rusty Russell
2006-08-06 22:00 ` Pavel Machek
2006-08-06 22:02 ` Pavel Machek
2006-08-07 9:12 ` Pavel Machek
2006-08-03 0:25 ` [patch 8/8] Put .note.* sections into a PT_NOTE segment in vmlinux Jeremy Fitzhardinge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060803002518.298650539@xensource.com \
--to=jeremy@xensource.com \
--cc=akpm@osdl.org \
--cc=jeremy@goop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rusty@rustcorp.com.au \
--cc=virtualization@lists.osdl.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.