From mboxrd@z Thu Jan 1 00:00:00 1970 From: khali@linux-fr.org (Jean Delvare) Date: Thu, 03 Aug 2006 08:49:59 +0000 Subject: [lm-sensors] Flex Scanner Jammed Problem Message-Id: <20060803104959.62f86115.khali@linux-fr.org> List-Id: References: <1064332995.5787.33.camel@nils> In-Reply-To: <1064332995.5787.33.camel@nils> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi Anthony, > Im still finding now that whatever I put in the sensors.conf file I get > flex scanner jammed. > > Even with just two lines, one defining the chip, and one defining a > label. Can you please send this file to us? In a way it won't be altered by the transfer. > Even with the newest version in the downloads section. > > But when I put a 0 byte file there it works... > > Any suggestions? Try our latest default configuration file: http://lm-sensors.org/svn/lm-sensors/trunk/etc/sensors.conf.eg If that works, then the problem is definitely the configuration file you created. If not... Please tell us with which versions of flex and bison you built lm_sensors. Note that you can use the "-c" option of "sensors" to select a configuration file. This should help you test different files. -- Jean Delvare