From: Jonathan McDowell <noodles@earth.li>
To: linux-omap-open-source@linux.omap.com
Subject: [PATCH] ARM: OMAP: Add some extra #defines for Amstrad Delta.
Date: Fri, 4 Aug 2006 23:55:56 +0100 [thread overview]
Message-ID: <20060804225555.GT17406@earth.li> (raw)
This patch adds some further #defines regarding GPIOs and latch bits for
the Amstrad Delta; the drivers that use them will be submitted at a
later date but there's no reason not to have the information already
there and available for use.
Signed-Off-By: Jonathan McDowell <noodles@earth.li>
-----
diff -ruNp linux-2.6.17-e3-02/include/asm-arm/arch-omap/board-ams-delta.h linux-2.6.17-e3-03/include/asm-arm/arch-omap/board-ams-delta.h
--- linux-2.6.17-e3-02/include/asm-arm/arch-omap/board-ams-delta.h 2006-06-18 02:49:35.000000000 +0100
+++ linux-2.6.17-e3-03/include/asm-arm/arch-omap/board-ams-delta.h 2006-07-08 12:35:03.850233000 +0100
@@ -50,9 +50,20 @@
#define AMS_DELTA_LATCH2_NAND_NWE 0x0020
#define AMS_DELTA_LATCH2_NAND_ALE 0x0040
#define AMS_DELTA_LATCH2_NAND_CLE 0x0080
+#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100
+#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200
+#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400
+#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800
#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000
#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0
+#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1
+#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2
+#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4
+#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6
+#define AMS_DELTA_GPIO_PIN_SCARD_IO 7
+#define AMS_DELTA_GPIO_PIN_CONFIG 11
#define AMS_DELTA_GPIO_PIN_NAND_RB 12
#ifndef __ASSEMBLY__
-----
J.
--
Just 'cause I remembered one thing doesn't make me smart!
next reply other threads:[~2006-08-04 22:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-04 22:55 Jonathan McDowell [this message]
2006-08-11 9:50 ` [PATCH] ARM: OMAP: Add some extra #defines for Amstrad Delta Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060804225555.GT17406@earth.li \
--to=noodles@earth.li \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.