From: Rodolfo Giometti <giometti@linux.it>
To: linux-mips@linux-mips.org
Subject: [PATCH] 2/7 AU1100 MMC support
Date: Wed, 9 Aug 2006 23:08:43 +0200 [thread overview]
Message-ID: <20060809210843.GC13145@enneenne.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 348 bytes --]
Protect code on "BCSR" device.
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
--
GNU/Linux Solutions e-mail: giometti@enneenne.com
Linux Device Driver giometti@gnudd.com
Embedded Systems giometti@linux.it
UNIX programming phone: +39 349 2432127
[-- Attachment #2: patch-mmc-de-bcsr --]
[-- Type: text/plain, Size: 1885 bytes --]
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index b0dc1d0..6084bb8 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -65,8 +65,8 @@ #endif
const struct {
u32 iobase;
u32 tx_devid, rx_devid;
- u16 bcsrpwr;
- u16 bcsrstatus;
+ u16 power;
+ u16 status;
u16 wpstatus;
} au1xmmc_card_table[] = {
{ SD0_BASE, DSCR_CMD0_SDMS_TX0, DSCR_CMD0_SDMS_RX0,
@@ -138,24 +138,42 @@ static inline void SEND_STOP(struct au1x
static void au1xmmc_set_power(struct au1xmmc_host *host, int state)
{
- u32 val = au1xmmc_card_table[host->id].bcsrpwr;
+ u32 val;
+ val = au1xmmc_card_table[host->id].power;
+
+#if defined(CONFIG_MIPS_DB1200)
bcsr->board &= ~val;
if (state) bcsr->board |= val;
+#endif
au_sync_delay(1);
}
static inline int au1xmmc_card_inserted(struct au1xmmc_host *host)
{
- return (bcsr->sig_status & au1xmmc_card_table[host->id].bcsrstatus)
- ? 1 : 0;
+ u32 val, data = 1;
+
+ val = au1xmmc_card_table[host->id].status;
+
+#if defined(CONFIG_MIPS_DB1200)
+ data = bcsr->sig_status & val;
+#endif
+
+ return !!data;
}
static inline int au1xmmc_card_readonly(struct au1xmmc_host *host)
{
- return (bcsr->status & au1xmmc_card_table[host->id].wpstatus)
- ? 1 : 0;
+ u32 val, data = 0;
+
+ val = au1xmmc_card_table[host->id].wpstatus;
+
+#if defined(CONFIG_MIPS_DB1200)
+ data = bcsr->status & val;
+#endif
+
+ return !!data;
}
static void au1xmmc_finish_request(struct au1xmmc_host *host)
@@ -175,7 +193,9 @@ static void au1xmmc_finish_request(struc
host->status = HOST_S_IDLE;
+#if defined(CONFIG_MIPS_DB1200)
bcsr->disk_leds |= (1 << 8);
+#endif
mmc_request_done(host->mmc, mrq);
}
@@ -670,7 +690,9 @@ static void au1xmmc_request(struct mmc_h
host->mrq = mrq;
host->status = HOST_S_CMD;
+#if defined(CONFIG_MIPS_DB1200)
bcsr->disk_leds &= ~(1 << 8);
+#endif
if (mrq->data) {
FLUSH_FIFO(host);
next reply other threads:[~2006-08-09 21:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-09 21:08 Rodolfo Giometti [this message]
2006-08-10 13:29 ` [PATCH] 2/7 AU1100 MMC support Sergei Shtylyov
2006-08-10 13:36 ` Rodolfo Giometti
2006-08-10 14:29 ` Manuel Lauss
2006-08-10 16:12 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060809210843.GC13145@enneenne.com \
--to=giometti@linux.it \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.