Re: [PATCH] 7/7 AU1100 MMC support

[Rodolfo Giometti <giometti@linux.it>]

[-- Attachment #1.1: Type: text/plain, Size: 627 bytes --]

On Wed, Aug 09, 2006 at 11:12:43PM +0200, Rodolfo Giometti wrote:
> Power Management support for AU1100 (PIO mode) added.
> 
> Signed-off-by: Rodolfo Giometti <giometti@linux.it>

Sorry, I forgot into this patch some debugging messages... :)

Please, use this one instead.

Ciao,

Rodolfo

Signed-off-by: Rodolfo Giometti <giometti@linux.it>

-- 

GNU/Linux Solutions                  e-mail:    giometti@enneenne.com
Linux Device Driver                             giometti@gnudd.com
Embedded Systems                     		giometti@linux.it
UNIX programming                     phone:     +39 349 2432127

[-- Attachment #1.2: patch-mmc-pm-au1100 --]
[-- Type: text/plain, Size: 2904 bytes --]

diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index 61acf6b..46b4fa5 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -19,6 +19,10 @@
  *     Rodolfo Giometti <giometti@linux.it>
  *     Eurotech S.p.A. <info@eurotech.it>
 
+ *  Power Management Support for AU1100 in PIO mode by:
+ *     Rodolfo Giometti <giometti@linux.it>
+ *     Eurotech S.p.A. <info@eurotech.it>
+
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -1086,11 +1090,75 @@ #endif
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static u32 sd_txport[2];
+static u32 sd_rxport[2];
+static u32 sd_config[2];
+static u32 sd_config2[2];
+static u32 sd_blksize[2];
+static u32 sd_status[2];
+static u32 sd_cmd[2];
+static u32 sd_cmdarg[2];
+static u32 sd_timeout[2];
+
+static int au1xmmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct au1xmmc_host *host = platform_get_drvdata(pdev);
+	struct mmc_host *mmc = host->mmc;
+	int ret = 0;
+
+	if (mmc)
+		ret = mmc_suspend_host(mmc, state);
+
+	sd_txport[host->id]  = au_readl(HOST_TXPORT(host));
+	sd_rxport[host->id]  = au_readl(HOST_RXPORT(host));
+	sd_config[host->id]  = au_readl(HOST_CONFIG(host));
+	sd_config2[host->id] = au_readl(HOST_CONFIG2(host));
+	sd_blksize[host->id] = au_readl(HOST_BLKSIZE(host));
+	sd_status[host->id]  = au_readl(HOST_STATUS(host));
+	sd_cmd[host->id]     = au_readl(HOST_CMD(host));
+	sd_cmdarg[host->id]  = au_readl(HOST_CMDARG(host));
+	sd_timeout[host->id] = au_readl(HOST_TIMEOUT(host));
+
+	au_writel(0x0, HOST_ENABLE(host));
+
+	return ret;
+}
+
+static int au1xmmc_resume(struct platform_device *pdev)
+{
+	struct au1xmmc_host *host = platform_get_drvdata(pdev);
+	struct mmc_host *mmc = host->mmc;
+	int ret = 0;
+
+	au1xmmc_reset_controller(host);
+
+	au_writel(sd_txport[host->id],  HOST_TXPORT(host));
+	au_writel(sd_rxport[host->id],  HOST_RXPORT(host));
+	au_writel(sd_config[host->id],  HOST_CONFIG(host));
+	au_writel(sd_config2[host->id], HOST_CONFIG2(host));
+	au_writel(sd_blksize[host->id], HOST_BLKSIZE(host));
+	au_writel(sd_status[host->id],  HOST_STATUS(host));
+	au_writel(sd_cmd[host->id],     HOST_CMD(host));
+	au_writel(sd_cmdarg[host->id],  HOST_CMDARG(host));
+	au_writel(sd_timeout[host->id], HOST_TIMEOUT(host));
+
+	if (mmc)
+		ret = mmc_resume_host(mmc);
+
+	return ret;
+}
+
+#else
+#define au1xmmc_suspend  NULL
+#define au1xmmc_resume   NULL
+#endif
+
 static struct platform_driver au1xmmc_driver = {
 	.probe         = au1xmmc_probe,
 	.remove        = au1xmmc_remove,
-	.suspend       = NULL,
-	.resume        = NULL,
+	.suspend       = au1xmmc_suspend,
+	.resume        = au1xmmc_resume,
 	.driver        = {
 		.name  = DRIVER_NAME,
 	},

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]