From mboxrd@z Thu Jan 1 00:00:00 1970 From: shadur@systemec.nl (Rens Houben) Date: Thu, 17 Aug 2006 14:49:21 +0000 Subject: [LARTC] TCNG and filter priorities Message-Id: <20060817144921.GA6074@systemec.nl> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello, A while ago I switched a bandwidth management setup from bash shell script using tc to a MUCH more readable tcng solution (yes, the same one I asked for help with earlier. It worked perfectly, thanks) and it's working very well. However, one of our clients now has a slightly unique situation, in that they're using colocation hosting to host their webserver with us, but keep the database server it connects to on their own connection, which only gets 2 Mbit to the outer world. I need to set up a special rule in the shaping script to specifically cover that connection and that connection only at a speed of 10 Mbit. Now back when I used tc directly I could just add a higher prio value to the tc filter statement, but I can't find the proper syntax to TCNG to make this setup work. What am I missing? -- Rens Houben | opinions are mine Resident linux guru and sysadmin | if my employers have one Systemec Internet Services. |they'll tell you themselves PGP key at http://marduk.systemec.nl/~shadur/shadur.key.asc _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc