From: thunder7@xs4all.nl
To: Roman Zippel <zippel@linux-m68k.org>
Cc: Helge Hafting <helgehaf@aitel.hist.no>, Andi Kleen <ak@suse.de>,
john stultz <johnstul@us.ibm.com>, Andrew Morton <akpm@osdl.org>,
linux-kernel@vger.kernel.org, thunder7@xs4all.nl
Subject: Re: 2.6.18-rc4-mm1 - time moving at 3x speed, bisect finished
Date: Sun, 20 Aug 2006 19:51:29 +0200 [thread overview]
Message-ID: <20060820175128.GA4217@amd64.of.nowhere> (raw)
In-Reply-To: <Pine.LNX.4.64.0608201859130.6762@scrub.home>
From: Roman Zippel <zippel@linux-m68k.org>
Date: Sun, Aug 20, 2006 at 07:06:21PM +0200
> Hi,
>
> On Sat, 19 Aug 2006, Helge Hafting wrote:
>
> > > Can you narrow it down to a specific patch in -mm?
> > >
> > The guilty patch is:
> > ntp-add-ntp_update_frequency.patch
>
> That's really weird, I don't really have an idea why it should go wrong
> there, could you please try the patch below and send me the kernel output?
> Thanks.
>
The interesting part:
3b9aca0000000000,d2ea237f00000000,d2ea237f00000000,35fe7fdef9db22
3b9aca0000000000,d2ea237f00000000,d2ea237f00000000,35fe7fdef9db22
3b9aca0000000000,d2ea237f00000000,d2ea237f00000000,35fe7fdef9db22
3b9aca0000000000,d2ea237f00000000,d2ea237f00000000,35fe7fdef9db22
3b9aca0000000000,d2ea237f00000000,d2ea237f00000000,35fe7fdef9db22
3b9aca0000000000,d2ea237f00000000,d2ea237f00000000,35fe7fdef9db22
Kind regards,
Jurriaan
Full dmesg:
Linux version 2.6.18-rc4-mm2 (jurriaan@middle) (gcc version 4.1.2 20060814 (prerelease) (Debian 4.1.1-11)) #3 Sun Aug 20 19:43:39 CEST 2006
Command line: root=/dev/md2 video=nvidiafb:1600x1200-32@85 atkbd.softrepeat=1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c800 (usable)
BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7d30
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff3040
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff30c0
ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x00000000bfff9900
ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x00000000bfff9a40
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff9b40
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff9840
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
On node 0 totalpages: 1028777
DMA zone: 2177 pages, LIFO batch:0
DMA32 zone: 768040 pages, LIFO batch:31
Normal zone: 258560 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:7 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009c000 - 000000000009d000
Nosave address range: 000000000009d000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Nosave address range: 00000000bfff0000 - 00000000bfff3000
Nosave address range: 00000000bfff3000 - 00000000c0000000
Nosave address range: 00000000c0000000 - 00000000e0000000
Nosave address range: 00000000e0000000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
Built 1 zonelists. Total pages: 1028777
Kernel command line: root=/dev/md2 video=nvidiafb:1600x1200-32@85 atkbd.softrepeat=1
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
3b9aca0000000000,d2ea237f00000000,d2ea237f00000000,35fe7fdef9db22
u: 3538559.870999, 0.0000
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2211.364 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
CPU 0: aperture @ 8000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 8000000
Memory: 4042988k/5242880k available (3762k kernel code, 150536k reserved, 2309k data, 232k init)
Calibrating delay using timer specific routine.. 4423.94 BogoMIPS (lpj=2211970)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3700+ stepping 01
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12564570
Detected 12.564 MHz APIC timer.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: No mmconfig possible on device 00:18
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Generic PHY: Registered new driver
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 8000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:05:08.2[B] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[d900e000-d900e7ff] Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d900d000-d900d7ff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:09.0
IO window: 6000-afff
MEM window: d8000000-d9ffffff
PREFETCH window: da100000-da1fffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: d0000000-d7ffffff
PREFETCH window: c0000000-cfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.27 [Flags: R/O].
io scheduler noop registered
io scheduler cfq registered (default)
PCI: Linking AER extended capability on 0000:00:0b.0
PCI: Linking AER extended capability on 0000:00:0c.0
PCI: Linking AER extended capability on 0000:00:0d.0
PCI: Linking AER extended capability on 0000:00:0e.0
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
nvidiafb: Device ID: 10de0141
nvidiafb: CRTC0 analog found
nvidiafb: CRTC1 analog found
i2c_adapter i2c-0: unable to read EDID block.
ohci1394: fw-host0: Running dma failed because Node ID is not valid
i2c_adapter i2c-0: unable to read EDID block.
i2c_adapter i2c-0: unable to read EDID block.
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 0 appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
nvidiafb: MTRR set to ON
Console: switching to colour frame buffer device 160x66
nvidiafb: PCI nVidia NV14 framebuffer (64MB @ 0xC0000000)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
Using specific hotkey driver
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using monotonic_clock().
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
skge 1.6 addr 0xd9008000 irq 17 chip Yukon-Lite rev 9
skge eth0: addr 00:15:f2:20:e6:69
Marvell 88E1101: Registered new driver
Davicom DM9161E: Registered new driver
Davicom DM9131: Registered new driver
Cicada Cis8204: Registered new driver
Cicada Cis8201: Registered new driver
LXT970: Registered new driver
LXT971: Registered new driver
QS6612: Registered new driver
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
eth1: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
Linux Tulip driver version 1.1.14 (May 6, 2006)
ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
tulip0: MII transceiver #1 config 3100 status 7829 advertising 01e1.
eth2: Lite-On 82c168 PNIC rev 32 at 0000000000018800, 00:A0:CC:21:89:0C, IRQ 17.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
ieee1394: Host added: ID:BUS[0-01:1023] GUID[00023c014100f4bf]
hda: WDC WD2000JB-32EVA0, ATA DISK drive
ieee1394: Host added: ID:BUS[1-00:1023] GUID[0011d80000738f5d]
hdb: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: WDC WD2000JB-00FUA0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
HPT374: IDE controller at PCI slot 0000:05:06.0
ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
HPT374: chipset revision 7
HPT374: DPLL base: 48 MHz, f_CNT: 149, assuming 33 MHz PCI
HPT374: using 66 MHz DPLL clock
HPT374: 100% native mode on irq 16
ide2: BM-DMA at 0x7000-0x7007, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0x7008-0x700f, BIOS settings: hdg:pio, hdh:pio
ACPI: PCI Interrupt 0000:05:06.1[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
HPT374: no clock data saved by BIOS
HPT374: DPLL base: 48 MHz, f_CNT: 121, assuming 33 MHz PCI
HPT374: using 66 MHz DPLL clock
ide4: BM-DMA at 0x8400-0x8407, BIOS settings: hdi:DMA, hdj:pio
ide5: BM-DMA at 0x8408-0x840f, BIOS settings: hdk:pio, hdl:pio
Probing IDE interface ide2...
hde: WDC WD2500JB-00FUA0, ATA DISK drive
ide2 at 0x6000-0x6007,0x6402 on irq 16
Probing IDE interface ide3...
Probing IDE interface ide4...
hdi: ST3300831A, ATA DISK drive
ide4 at 0x7400-0x7407,0x7802 on irq 16
Probing IDE interface ide5...
Probing IDE interface ide3...
Probing IDE interface ide5...
hda: max request size: 512KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdc: max request size: 512KiB
hdc: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hdc: cache flushes supported
hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 >
hde: max request size: 512KiB
hde: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
hde: cache flushes supported
hde: hde1
hdi: max request size: 512KiB
hdi: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(100)
hdi: cache flushes supported
hdi: hdi1
hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
libata version 2.00 loaded.
sata_sil 0000:05:0a.0: version 2.0
ACPI: PCI Interrupt 0000:05:0a.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
ata1: SATA max UDMA/100 cmd 0xFFFFC200100BA080 ctl 0xFFFFC200100BA08A bmdma 0xFFFFC200100BA000 irq 19
ata2: SATA max UDMA/100 cmd 0xFFFFC200100BA0C0 ctl 0xFFFFC200100BA0CA bmdma 0xFFFFC200100BA008 irq 19
ata3: SATA max UDMA/100 cmd 0xFFFFC200100BA280 ctl 0xFFFFC200100BA28A bmdma 0xFFFFC200100BA200 irq 19
ata4: SATA max UDMA/100 cmd 0xFFFFC200100BA2C0 ctl 0xFFFFC200100BA2CA bmdma 0xFFFFC200100BA208 irq 19
scsi0 : sata_sil
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
scsi1 : sata_sil
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/100
scsi2 : sata_sil
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata3.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata3.00: ata3: dev 0 multi count 16
ata3.00: configured for UDMA/100
scsi3 : sata_sil
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata4.00: ata4: dev 0 multi count 16
ata4.00: configured for UDMA/100
Vendor: ATA Model: ST3250823AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Vendor: ATA Model: ST3250823AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
Vendor: ATA Model: ST3250823AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
Losing some ticks... checking if CPU frequency changed.
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
sdc: sdc1
sd 2:0:0:0: Attached scsi disk sdc
sd 2:0:0:0: Attached scsi generic sg2 type 0
Vendor: ATA Model: ST3250823AS Rev: 3.02
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
sdd: sdd1
sd 3:0:0:0: Attached scsi disk sdd
sd 3:0:0:0: Attached scsi generic sg3 type 0
sata_nv 0000:00:07.0: version 2.0
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata5: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 22
ata6: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 22
scsi4 : sata_nv
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7, max UDMA/133, 586072368 sectors: LBA48 NCQ (depth 0/32)
ata5.00: ata5: dev 0 multi count 1
ata5.00: configured for UDMA/133
scsi5 : sata_nv
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata6.00: ata6: dev 0 multi count 1
ata6.00: configured for UDMA/133
Vendor: ATA Model: ST3300622AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sde: 586072368 512-byte hdwr sectors (300069 MB)
sde: Write Protect is off
sde: Mode Sense: 00 3a 00 00
SCSI device sde: drive cache: write back
SCSI device sde: 586072368 512-byte hdwr sectors (300069 MB)
sde: Write Protect is off
sde: Mode Sense: 00 3a 00 00
SCSI device sde: drive cache: write back
sde: sde1 sde2
sd 4:0:0:0: Attached scsi disk sde
sd 4:0:0:0: Attached scsi generic sg4 type 0
Vendor: ATA Model: ST3250823AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB)
sdf: Write Protect is off
sdf: Mode Sense: 00 3a 00 00
SCSI device sdf: drive cache: write back
SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB)
sdf: Write Protect is off
sdf: Mode Sense: 00 3a 00 00
SCSI device sdf: drive cache: write back
sdf: sdf1
sd 5:0:0:0: Attached scsi disk sdf
sd 5:0:0:0: Attached scsi generic sg5 type 0
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata7: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 21
ata8: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 21
scsi6 : sata_nv
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-7, max UDMA/133, 586072368 sectors: LBA48 NCQ (depth 0/32)
ata7.00: ata7: dev 0 multi count 1
ata7.00: configured for UDMA/133
scsi7 : sata_nv
ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata8.00: ata8: dev 0 multi count 1
ata8.00: configured for UDMA/133
Vendor: ATA Model: ST3300622AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdg: 586072368 512-byte hdwr sectors (300069 MB)
sdg: Write Protect is off
sdg: Mode Sense: 00 3a 00 00
SCSI device sdg: drive cache: write back
SCSI device sdg: 586072368 512-byte hdwr sectors (300069 MB)
sdg: Write Protect is off
sdg: Mode Sense: 00 3a 00 00
SCSI device sdg: drive cache: write back
sdg: sdg1 sdg2
sd 6:0:0:0: Attached scsi disk sdg
sd 6:0:0:0: Attached scsi generic sg6 type 0
Vendor: ATA Model: ST3250823AS Rev: 3.03
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdh: 488397168 512-byte hdwr sectors (250059 MB)
sdh: Write Protect is off
sdh: Mode Sense: 00 3a 00 00
SCSI device sdh: drive cache: write back
SCSI device sdh: 488397168 512-byte hdwr sectors (250059 MB)
sdh: Write Protect is off
sdh: Mode Sense: 00 3a 00 00
SCSI device sdh: drive cache: write back
sdh: sdh1
sd 7:0:0:0: Attached scsi disk sdh
sd 7:0:0:0: Attached scsi generic sg7 type 0
pata_hpt37x: BIOS has not set timing clocks.
hpt37x: HPT374: Bus clock 33MHz.
PCI: Unable to reserve I/O region #1:8@7400 for device 0000:05:06.1
pata_hpt37x: probe of 0000:05:06.1 failed with error -16
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 20, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18-rc4-mm2 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xda004000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.18-rc4-mm2 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: int64x1 2066 MB/s
raid6: int64x2 2785 MB/s
raid6: int64x4 2683 MB/s
raid6: int64x8 1800 MB/s
raid6: sse2x1 2269 MB/s
raid6: sse2x2 3285 MB/s
raid6: sse2x4 3824 MB/s
raid6: using algorithm sse2x4 (3824 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: generic_sse
generic_sse: 7064.000 MB/sec
raid5: using function: generic_sse (7064.000 MB/sec)
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 8
NET: Registered protocol family 20
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ processors (version 2.00.00)
powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x8
powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x6
ACPI: (supports S0 S1 S3 S4 S5)
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
logips2pp: Detected unknown logitech mouse model 1
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdh1 ...
md: adding sdh1 ...
md: adding sdg1 ...
md: adding sdf1 ...
md: adding sde1 ...
md: adding sdd1 ...
md: adding sdc1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: hdc9 has different UUID to sdh1
md: hdc8 has different UUID to sdh1
md: hdc7 has different UUID to sdh1
md: hdc6 has different UUID to sdh1
md: hdc5 has different UUID to sdh1
md: hda9 has different UUID to sdh1
md: hda8 has different UUID to sdh1
md: hda7 has different UUID to sdh1
md: hda6 has different UUID to sdh1
md: hda5 has different UUID to sdh1
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: bind<sdc1>
md: bind<sdd1>
md: bind<sde1>
md: bind<sdf1>
md: bind<sdg1>
md: bind<sdh1>
md: running: <sdh1><sdg1><sdf1><sde1><sdd1><sdc1><sdb1><sda1>
raid5: device sdh1 operational as raid disk 1
raid5: device sdg1 operational as raid disk 0
raid5: device sdf1 operational as raid disk 5
raid5: device sde1 operational as raid disk 6
raid5: device sdd1 operational as raid disk 7
raid5: device sdc1 operational as raid disk 3
raid5: device sdb1 operational as raid disk 2
raid5: device sda1 operational as raid disk 4
raid5: allocated 8462kB for md0
raid5: raid level 6 set md0 active with 8 out of 8 devices, algorithm 2
RAID5 conf printout:
--- rd:8 wd:8
disk 0, o:1, dev:sdg1
disk 1, o:1, dev:sdh1
disk 2, o:1, dev:sdb1
disk 3, o:1, dev:sdc1
disk 4, o:1, dev:sda1
disk 5, o:1, dev:sdf1
disk 6, o:1, dev:sde1
disk 7, o:1, dev:sdd1
md0: bitmap initialized from disk: read 15/15 pages, set 1 bits, status: 0
created bitmap (233 pages) for device md0
md: considering hdc9 ...
md: adding hdc9 ...
md: hdc8 has different UUID to hdc9
md: hdc7 has different UUID to hdc9
md: hdc6 has different UUID to hdc9
md: hdc5 has different UUID to hdc9
md: adding hda9 ...
md: hda8 has different UUID to hdc9
md: hda7 has different UUID to hdc9
md: hda6 has different UUID to hdc9
md: hda5 has different UUID to hdc9
md: created md4
md: bind<hda9>
md: bind<hdc9>
md: running: <hdc9><hda9>
raid1: raid set md4 active with 2 out of 2 mirrors
md4: bitmap initialized from disk: read 10/10 pages, set 3 bits, status: 0
created bitmap (156 pages) for device md4
md: considering hdc8 ...
md: adding hdc8 ...
md: hdc7 has different UUID to hdc8
md: hdc6 has different UUID to hdc8
md: hdc5 has different UUID to hdc8
md: adding hda8 ...
md: hda7 has different UUID to hdc8
md: hda6 has different UUID to hdc8
md: hda5 has different UUID to hdc8
md: created md3
md: bind<hda8>
md: bind<hdc8>
md: running: <hdc8><hda8>
raid1: raid set md3 active with 2 out of 2 mirrors
md3: bitmap initialized from disk: read 8/8 pages, set 5 bits, status: 0
created bitmap (123 pages) for device md3
md: considering hdc7 ...
md: adding hdc7 ...
md: hdc6 has different UUID to hdc7
md: hdc5 has different UUID to hdc7
md: adding hda7 ...
md: hda6 has different UUID to hdc7
md: hda5 has different UUID to hdc7
md: created md2
md: bind<hda7>
md: bind<hdc7>
md: running: <hdc7><hda7>
raid1: raid set md2 active with 2 out of 2 mirrors
md2: bitmap initialized from disk: read 8/8 pages, set 87 bits, status: 0
created bitmap (123 pages) for device md2
md: considering hdc6 ...
md: adding hdc6 ...
md: hdc5 has different UUID to hdc6
md: adding hda6 ...
md: hda5 has different UUID to hdc6
md: created md1
md: bind<hda6>
md: bind<hdc6>
md: running: <hdc6><hda6>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: bitmap initialized from disk: read 12/12 pages, set 54 bits, status: 0
created bitmap (184 pages) for device md1
md: considering hdc5 ...
md: adding hdc5 ...
md: adding hda5 ...
md: created md5
md: bind<hda5>
md: bind<hdc5>
md: running: <hdc5><hda5>
raid1: raid set md5 active with 2 out of 2 mirrors
md5: bitmap initialized from disk: read 9/9 pages, set 0 bits, status: 0
created bitmap (129 pages) for device md5
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 232k freed
hdb: Speed warnings UDMA 3/4/5 is not functional.
Adding 4200888k swap on /dev/md5. Priority:-1 extents:1 across:4200888k
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on md2, internal journal
3b9aca0000000000,d2ea237f00000000,d2ea237f00000000,35fe7fdef9db22
u: 3538559.870999, 0.0000
3b9aca0000000000,d2ea237f00000000,d2ea237f00000000,35fe7fdef9db22
u: 3538559.870999, 0.0000
i2c_adapter i2c-3: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-4: nForce2 SMBus adapter at 0x4c40
it87: Found IT8712F chip at 0x290, revision 7
it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface
ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
Installing spdif_bug patch: Audigy 2 ZS [2001]
3b9aca0000000000,d2ea237f00000000,d2ea237f00000000,35fe7fdef9db22
u: 3538559.870999, 0.0000
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: md4: found reiserfs format "3.6" with standard journal
ReiserFS: md4: using ordered data mode
reiserfs: using flush barriers
ReiserFS: md4: journal params: device md4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md4: checking transaction log (md4)
ReiserFS: md4: Using r5 hash to sort names
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: hde1: found reiserfs format "3.6" with standard journal
ReiserFS: hde1: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hde1: journal params: device hde1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hde1: checking transaction log (hde1)
ReiserFS: hde1: Using r5 hash to sort names
ReiserFS: sde2: found reiserfs format "3.6" with standard journal
ReiserFS: sde2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sde2: journal params: device sde2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sde2: checking transaction log (sde2)
ReiserFS: sde2: Using r5 hash to sort names
ReiserFS: sdg2: found reiserfs format "3.6" with standard journal
ReiserFS: sdg2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sdg2: journal params: device sdg2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdg2: checking transaction log (sdg2)
ReiserFS: sdg2: Using r5 hash to sort names
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdi1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ip_tables: (C) 2000-2006 Netfilter Core Team
switch: Setting full-duplex based on MII#1 link partner capability of cde1.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
3b9aca0000000000,d2ea237f00000000,d2ea237f00000000,35fe7fdef9db22
u: 3538559.870999, 0.0000
3b9aca0000000000,d2ea237f00000000,d2ea237f00000000,35fe7fdef9db22
u: 3538559.870999, 0.0000
switch: no IPv6 routers present
adsl: no IPv6 routers present
--
"I see!" said the blind man as he picked up his hammer and saw.
Debian (Unstable) GNU/Linux 2.6.18-rc4-mm2 4423 bogomips load 0.39
next prev parent reply other threads:[~2006-08-20 17:50 UTC|newest]
Thread overview: 189+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-13 8:24 2.6.18-rc4-mm1 Andrew Morton
2006-08-13 11:45 ` 2.6.18-rc4-mm1 Maciej Rutecki
2006-08-13 19:11 ` 2.6.18-rc4-mm1 Andrew Morton
2006-08-13 22:44 ` 2.6.18-rc4-mm1 Ben Buxton
2006-08-13 22:58 ` 2.6.18-rc4-mm1 Michal Piotrowski
2006-08-13 23:25 ` 2.6.18-rc4-mm1 Dave Jones
2006-08-14 11:55 ` 2.6.18-rc4-mm1 Ben Buxton
2006-08-14 20:20 ` 2.6.18-rc4-mm1 Dave Jones
2006-08-14 21:13 ` 2.6.18-rc4-mm1 Ben B
2006-08-14 21:22 ` 2.6.18-rc4-mm1 Dave Jones
2006-08-14 21:46 ` 2.6.18-rc4-mm1 Andrew Morton
2006-08-14 0:00 ` 2.6.18-rc4-mm1 Dmitry Torokhov
2006-08-14 12:03 ` 2.6.18-rc4-mm1 Ben B
2006-08-14 13:45 ` 2.6.18-rc4-mm1 Dmitry Torokhov
2006-08-14 21:44 ` 2.6.18-rc4-mm1 Ben B
2006-08-15 2:23 ` 2.6.18-rc4-mm1 Dmitry Torokhov
2022-08-14 8:42 ` 2.6.18-rc4-mm1 Maciej Rutecki
2006-08-14 9:12 ` 2.6.18-rc4-mm1 Rafael J. Wysocki
2006-08-14 11:35 ` 2.6.18-rc4-mm1 Maciej Rutecki
2006-08-15 0:27 ` Linux Kernel Developer opening Eric Radman
2006-08-17 12:22 ` 2.6.18-rc4-mm1 Andreas Mohr
2006-08-18 10:30 ` 2.6.18-rc4-mm1 Andy Whitcroft
2006-08-13 23:58 ` 2.6.18-rc4-mm1 Dmitry Torokhov
[not found] ` <d120d5000608140643tddd9ce4o986560740ef5dbd7@mail.gmail.com>
2006-08-14 18:24 ` 2.6.18-rc4-mm1 Maciej Rutecki
2006-08-13 12:24 ` 2.6.18-rc4-mm1 Michal Piotrowski
2006-08-14 6:36 ` 2.6.18-rc4-mm1 Reuben Farrelly
2006-08-14 9:06 ` 2.6.18-rc4-mm1 Rafael J. Wysocki
2006-08-13 12:43 ` 2.6.18-rc4-mm1 Rafael J. Wysocki
2006-08-13 14:32 ` [patch] fix posix timer errors Frederik Deweerdt
2006-08-13 17:23 ` Andrew Morton
2006-08-13 15:30 ` [-mm patch] arch/i386/mm/ioremap.c must #include <asm/cacheflush.h> Adrian Bunk
2006-08-13 15:30 ` 2.6.18-rc4-mm1: drivers/video/sis/ compile error Adrian Bunk
2006-08-13 16:29 ` Michal Piotrowski
2006-08-13 16:40 ` Adrian Bunk
2006-08-13 17:20 ` Michal Piotrowski
2006-08-13 17:38 ` 2.6.18-rc4-mm1 Laurent Riffard
2006-08-13 20:39 ` 2.6.18-rc4-mm1 Andrew Morton
2006-08-14 7:58 ` 2.6.18-rc4-mm1 David Howells
2006-08-14 8:06 ` 2.6.18-rc4-mm1 Ian Kent
2006-08-14 9:32 ` 2.6.18-rc4-mm1 David Howells
2006-08-14 17:16 ` 2.6.18-rc4-mm1 Andrew Morton
2006-08-14 18:12 ` 2.6.18-rc4-mm1 David Howells
2006-08-14 18:17 ` 2.6.18-rc4-mm1 David Howells
2006-08-14 18:24 ` 2.6.18-rc4-mm1 Andrew Morton
2006-08-14 18:32 ` 2.6.18-rc4-mm1 David Howells
2006-08-14 21:31 ` 2.6.18-rc4-mm1 Andrew Morton
2006-08-15 9:51 ` 2.6.18-rc4-mm1 David Howells
2006-08-15 13:50 ` 2.6.18-rc4-mm1 Andrew Morton
2006-08-15 14:47 ` 2.6.18-rc4-mm1 David Howells
2006-08-15 16:15 ` 2.6.18-rc4-mm1 Andrew Morton
2006-08-15 17:29 ` 2.6.18-rc4-mm1 David Howells
2006-08-15 17:48 ` 2.6.18-rc4-mm1 Andrew Morton
2006-08-15 18:35 ` 2.6.18-rc4-mm1 David Howells
2006-08-15 18:49 ` 2.6.18-rc4-mm1 Andrew Morton
2006-08-15 19:20 ` 2.6.18-rc4-mm1 David Howells
2006-08-16 9:34 ` 2.6.18-rc4-mm1 David Howells
2006-08-16 10:00 ` 2.6.18-rc4-mm1 David Howells
2006-08-16 12:23 ` 2.6.18-rc4-mm1 David Howells
2006-08-16 12:58 ` 2.6.18-rc4-mm1 Ian Kent
2006-08-16 13:20 ` 2.6.18-rc4-mm1 David Howells
2006-08-16 12:36 ` 2.6.18-rc4-mm1 Ian Kent
2006-08-14 22:49 ` 2.6.18-rc4-mm1 Trond Myklebust
2006-08-14 23:51 ` 2.6.18-rc4-mm1 Andrew Morton
2006-08-15 16:39 ` 2.6.18-rc4-mm1 David Howells
2006-08-15 16:55 ` 2.6.18-rc4-mm1 David Howells
2006-08-15 17:13 ` 2.6.18-rc4-mm1 Trond Myklebust
2006-08-15 17:22 ` 2.6.18-rc4-mm1 David Howells
2006-08-16 15:15 ` [PATCH] NFS: Revalidate on readdir referring to null dentry David Howells
2006-08-16 15:49 ` Trond Myklebust
2006-08-16 16:15 ` [PATCH] NFS: Replace null dentries that appear in readdir's list David Howells
2006-08-16 16:35 ` Trond Myklebust
2006-08-17 5:12 ` Ian Kent
2006-08-17 7:42 ` Andrew Morton
2006-08-17 12:13 ` David Howells
2006-08-17 12:33 ` David Howells
2006-08-18 9:09 ` David Howells
2006-08-17 13:24 ` David Howells
2006-08-17 13:45 ` David Howells
2006-08-18 0:47 ` Ian Kent
2006-08-18 9:21 ` David Howells
2006-08-18 0:58 ` Ian Kent
2006-08-18 1:05 ` Ian Kent
2006-08-18 9:38 ` [PATCH] NFS: Replace null dentries that appear in readdir's list [try #2] David Howells
2006-08-19 16:48 ` Andrew Morton
2006-08-20 13:15 ` David Howells
2006-08-20 14:25 ` Ian Kent
2006-08-21 9:42 ` David Howells
2006-08-21 11:35 ` Ian Kent
2006-08-21 12:16 ` David Howells
2006-08-21 13:33 ` Ian Kent
2006-08-21 15:17 ` David Howells
2006-08-22 2:04 ` Ian Kent
2006-08-22 3:29 ` Ian Kent
2006-08-22 4:10 ` Trond Myklebust
2006-08-13 21:00 ` [-mm patch] make drivers/cpufreq/cpufreq_ondemand.c:powersave_bias_target() static Adrian Bunk
2006-08-13 21:00 ` [lm-sensors] [-mm patch] make Adrian Bunk
2006-08-13 21:00 ` [-mm patch] make drivers/hwmon/hdaps.c:transform_axes() static Adrian Bunk
2006-08-13 22:56 ` [lm-sensors] [-mm patch] make Shem Multinymous
2006-08-13 22:56 ` [-mm patch] make drivers/hwmon/hdaps.c:transform_axes() static Shem Multinymous
2006-08-13 21:00 ` [-mm patch] drivers/media/dvb/frontends/: make 4 functions static Adrian Bunk
2006-08-13 21:00 ` [-mm patch] drivers/char/drm/: cleanups Adrian Bunk
2006-08-13 21:00 ` [-mm patch] kernel/time/ntp.c: possible cleanups Adrian Bunk
2006-08-13 21:01 ` [-mm patch] cleanup drivers/ata/Kconfig Adrian Bunk
2006-08-13 22:46 ` Alan Cox
2006-08-14 22:12 ` Adrian Bunk
2006-08-14 18:28 ` Jeff Garzik
2006-08-14 22:33 ` [libata " Adrian Bunk
2006-08-15 7:51 ` [-mm " Greg KH
2006-08-15 9:39 ` Adrian Bunk
2006-08-13 21:01 ` [-mm patch] net/decnet/: cleanups Adrian Bunk
2006-08-13 21:01 ` [-mm patch] net/ipv6/ip6_fib.c: make code static Adrian Bunk
2006-08-13 21:01 ` [-mm patch] Kconfig: move CRYPTO to the "Cryptographic options" menu Adrian Bunk
2006-08-13 22:40 ` Herbert Xu
2006-08-13 23:01 ` 2.6.18-rc4-mm1: ATI SB600 SATA drivers: modpost errors Adrian Bunk
2006-08-14 7:00 ` [patch -mm] s390: remove HIGHMEM dependencies Heiko Carstens
2006-08-14 14:13 ` Christoph Lameter
2006-08-14 14:02 ` 2.6.18-rc4-mm1 Michal Piotrowski
2006-08-14 18:19 ` 2.6.18-rc4-mm1 Andrew Morton
2006-08-14 19:01 ` 2.6.18-rc4-mm1 Michal Piotrowski
2006-08-14 19:20 ` 2.6.18-rc4-mm1 john stultz
2006-08-14 19:27 ` 2.6.18-rc4-mm1 Michal Piotrowski
2006-08-14 19:44 ` 2.6.18-rc4-mm1 john stultz
2006-08-14 20:48 ` 2.6.18-rc4-mm1 Michal Piotrowski
2006-08-14 20:56 ` 2.6.18-rc4-mm1 Dave Jones
2006-08-14 21:13 ` 2.6.18-rc4-mm1 Michal Piotrowski
2006-08-14 21:20 ` 2.6.18-rc4-mm1 Dave Jones
2006-08-14 22:08 ` 2.6.18-rc4-mm1 Michal Piotrowski
2006-08-14 14:38 ` 2.6.18-rc4-mm1: eth0: trigger_send() called with the transmitter busy Laurent Riffard
2006-08-14 16:50 ` Andrew Morton
2006-08-14 17:47 ` Laurent Riffard
2006-08-14 20:06 ` Laurent Riffard
2006-08-14 21:25 ` Rafael J. Wysocki
2006-08-14 23:01 ` Laurent Riffard
2006-08-15 10:10 ` Rafael J. Wysocki
2006-08-15 15:38 ` Laurent Riffard
2006-08-15 16:39 ` Rafael J. Wysocki
2006-08-15 16:39 ` Rafael J. Wysocki
2006-08-14 15:11 ` [-mm PATCH] ioremap: fixed MIPS build error Yoichi Yuasa
2006-08-14 17:54 ` 2.6.18-rc4-mm1 Rafael J. Wysocki
2006-08-14 18:15 ` 2.6.18-rc4-mm1 Andrew Morton
2006-08-15 14:07 ` 2.6.18-rc4-mm1 Atsushi Nemoto
2006-08-15 17:14 ` 2.6.18-rc4-mm1 Rafael J. Wysocki
2006-08-15 13:25 ` 2.6.18-rc4-mm1 BUG, drm related Frederik Deweerdt
2006-08-15 14:16 ` Andrew Morton
2006-08-15 17:37 ` Frederik Deweerdt
2006-08-15 16:21 ` Andrew Morton
2006-08-18 11:11 ` oops while loading snd-seq-oss (was: Re: 2.6.18-rc4-mm1 BUG, drm related) Frederik Deweerdt
2006-08-18 15:52 ` Andrew Morton
2006-08-18 15:58 ` Takashi Iwai
2006-08-18 18:44 ` Frederik Deweerdt
2006-08-18 19:43 ` Frederik Deweerdt
2006-08-18 18:45 ` Frederik Deweerdt
2006-08-19 23:08 ` 2.6.18-rc4-mm1 BUG, drm relatedy Frederik Deweerdt
2006-08-21 11:24 ` Dave Airlie
2006-08-21 14:08 ` Frederik Deweerdt
2006-08-21 23:48 ` Dave Airlie
2006-08-16 9:41 ` 2.6.18-rc4-mm1 -- new depancy on curses development Andy Whitcroft
2006-08-16 10:35 ` Andy Whitcroft
2006-08-16 18:33 ` Sam Ravnborg
2006-08-16 19:26 ` Andy Whitcroft
2006-08-16 11:44 ` 2.6.18-rc4-mm1 BUG null pointer deref while saving a file Helge Hafting
2006-08-16 14:28 ` Dave Kleikamp
2006-08-18 8:24 ` Helge Hafting
2006-08-18 12:20 ` Dave Kleikamp
2006-08-17 22:10 ` 2.6.18-rc4-mm1 Spurious ACK/NAK on isa0060/serio0, 2.6.18-rc2 is fine Helge Hafting
2006-08-17 22:34 ` Helge Hafting
2006-08-18 21:56 ` Greg KH
2006-08-19 11:00 ` Helge Hafting
2006-08-17 22:44 ` 2.6.18-rc4-mm1 - time moving at 3x speed! Helge Hafting
2006-08-17 23:15 ` john stultz
2006-08-18 8:18 ` Helge Hafting
2006-08-18 9:34 ` Andi Kleen
2006-08-18 9:30 ` Helge Hafting
2006-08-18 10:55 ` Andi Kleen
2006-08-18 10:01 ` Helge Hafting
2006-08-18 10:24 ` Rafael J. Wysocki
2006-08-18 11:21 ` Andi Kleen
2006-08-18 22:23 ` Randy.Dunlap
2006-08-19 10:50 ` 2.6.18-rc4-mm1 - time moving at 3x speed, bisect finished Helge Hafting
2006-08-20 17:06 ` Roman Zippel
2006-08-20 17:51 ` thunder7 [this message]
2006-08-20 19:24 ` Roman Zippel
2006-08-20 19:42 ` thunder7
2006-08-20 21:47 ` 2.6.18-rc4-mm1 - time moving at 3x speed, fix confirmed Helge Hafting
2006-08-19 23:16 ` [mm patch] drm, minor fixes Frederik Deweerdt
2006-08-20 9:37 ` Arjan van de Ven
2006-08-20 12:17 ` Frederik Deweerdt
2006-08-21 11:22 ` Dave Airlie
2006-08-20 14:48 ` [PATCH -mm] agp.h: constify struct agp_bridge_data::version Alexey Dobriyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060820175128.GA4217@amd64.of.nowhere \
--to=thunder7@xs4all.nl \
--cc=ak@suse.de \
--cc=akpm@osdl.org \
--cc=helgehaf@aitel.hist.no \
--cc=johnstul@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=zippel@linux-m68k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.