Re: [PATCH] ethtool v4: add autoneg advertise feature

[Bill Fink <billfink@mindspring.com>]

On Thu, 24 Aug 2006, Michael Chan wrote:

> Jeff Kirsher wrote:
> 
> > The old way of setting autonegotiation was using the 
> > following command:
> > ethtool -s ethx speed 100 duplex full auto on
> > now the command would be
> > ethtool -s ethx auto on advertise 0x08
> > both commands would result in only advertising 100 FULL.
> > 
> > There still needs to be a change made to the man file to reflect the
> > change in the behavior of ethtool, which I have not done.  But this
> > patch will allow for greater flexibility in setting autonegotiation
> > speeds.
> 
> It is more flexible, but less intuitive.  The user now has to
> remember hex values instead of the more intuitive speed and
> duplex.  Perhaps we can keep the old method of using speed and
> duplex, while adding the new method of specifying hex values? 

I agree.  Something like:

	ethtool -s ethx auto on advertise mode1+mode2+...+moden

For example:

	ethtool -s ethx auto on advertise 100-half+100-full

to set speed 100 either half or full duplex.

Maybe have some abbreviations such as 100-all (same as above) or
all-half (for all supported half duplex) or just all (for all supported
modes), which I suppose is the default.

Just an idea.

						-Bill