From: Jeremy Fitzhardinge <jeremy@goop.org>
To: linux-kernel@vger.kernel.org
Cc: Chuck Ebbert <76306.1226@compuserve.com>,
Zachary Amsden <zach@vmware.com>,
Jan Beulich <jbeulich@novell.com>, Andi Kleen <ak@suse.de>,
Andrew Morton <akpm@osdl.org>
Subject: [PATCH RFC 2/6] Initialize the per-CPU data area.
Date: Sun, 27 Aug 2006 01:44:19 -0700 [thread overview]
Message-ID: <20060827084450.991618709@goop.org> (raw)
In-Reply-To: 20060827084417.918992193@goop.org
[-- Attachment #1: i386-pda-init.patch --]
[-- Type: text/plain, Size: 3578 bytes --]
When a CPU is brought up, a PDA and GDT are allocated for it. The
GDT's __KERNEL_PDA entry is pointed to the allocated PDA memory, so
that all references using this segment selector will refer to the PDA.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chuck Ebbert <76306.1226@compuserve.com>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@suse.de>
---
arch/i386/kernel/cpu/common.c | 49 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 46 insertions(+), 3 deletions(-)
===================================================================
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/i386/kernel/cpu/common.c
@@ -18,6 +18,7 @@
#include <asm/apic.h>
#include <mach_apic.h>
#endif
+#include <asm/pda.h>
#include "cpu.h"
@@ -26,6 +27,9 @@ EXPORT_PER_CPU_SYMBOL(cpu_gdt_descr);
DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
+
+struct i386_pda *_cpu_pda[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(_cpu_pda);
static int cachesize_override __cpuinitdata = -1;
static int disable_x86_fxsr __cpuinitdata;
@@ -582,6 +586,26 @@ void __init early_cpu_init(void)
disable_pse = 1;
#endif
}
+
+static __cpuinit void pda_init(int cpu)
+{
+ struct i386_pda *pda = cpu_pda(cpu);
+
+ memset(pda, 0, sizeof(*pda));
+
+ pda->cpu_number = cpu;
+ pda->pcurrent = current;
+
+ printk("cpu %d current %p\n", cpu, current);
+}
+
+struct pt_regs * __devinit idle_regs(struct pt_regs *regs)
+{
+ memset(regs, 0, sizeof(struct pt_regs));
+ regs->xgs = __KERNEL_PDA;
+ return regs;
+}
+
/*
* cpu_init() initializes state that is per-CPU. Some data is already
* initialized (naturally) in the bootstrap process, such as the GDT
@@ -594,6 +618,7 @@ void __cpuinit cpu_init(void)
struct tss_struct * t = &per_cpu(init_tss, cpu);
struct thread_struct *thread = ¤t->thread;
struct desc_struct *gdt;
+ struct i386_pda *pda;
__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
@@ -615,6 +640,10 @@ void __cpuinit cpu_init(void)
/* The CPU hotplug case */
if (cpu_gdt_descr->address) {
gdt = (struct desc_struct *)cpu_gdt_descr->address;
+ pda = cpu_pda(cpu);
+
+ BUG_ON(pda == NULL);
+
memset(gdt, 0, PAGE_SIZE);
goto old_gdt;
}
@@ -625,13 +654,17 @@ void __cpuinit cpu_init(void)
* CPUs, when bootmem will have gone away
*/
if (NODE_DATA(0)->bdata->node_bootmem_map) {
- gdt = (struct desc_struct *)alloc_bootmem_pages(PAGE_SIZE);
+ gdt = alloc_bootmem_pages(PAGE_SIZE);
+ pda = alloc_bootmem(sizeof(*pda));
+
/* alloc_bootmem_pages panics on failure, so no check */
memset(gdt, 0, PAGE_SIZE);
} else {
gdt = (struct desc_struct *)get_zeroed_page(GFP_KERNEL);
- if (unlikely(!gdt)) {
- printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu);
+ pda = kmalloc_node(sizeof(*pda), GFP_KERNEL, cpu_to_node(cpu));
+
+ if (unlikely(!gdt || !pda)) {
+ printk(KERN_CRIT "CPU%d failed to allocate GDT or PDA\n", cpu);
for (;;)
local_irq_enable();
}
@@ -651,6 +684,16 @@ old_gdt:
cpu_gdt_descr->size = GDT_SIZE - 1;
cpu_gdt_descr->address = (unsigned long)gdt;
+
+ /* Set up the PDA in this CPU's GDT */
+ cpu_pda(cpu) = pda;
+
+ pda_init(cpu);
+
+ pack_descriptor((u32 *)&gdt[GDT_ENTRY_PDA].a,
+ (u32 *)&gdt[GDT_ENTRY_PDA].b,
+ (unsigned long)pda, sizeof(*pda) - 1,
+ 0x80 | DESCTYPE_S | 0x2, 0); /* present read-write data segment */
load_gdt(cpu_gdt_descr);
load_idt(&idt_descr);
--
next prev parent reply other threads:[~2006-08-27 9:25 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-27 8:44 [PATCH RFC 0/6] Implement per-processor data areas for i386 Jeremy Fitzhardinge
2006-08-27 8:44 ` [PATCH RFC 1/6] Basic definitions for i386-pda Jeremy Fitzhardinge
2006-08-27 8:44 ` Jeremy Fitzhardinge [this message]
2006-08-27 8:44 ` [PATCH RFC 3/6] Use %gs as the PDA base-segment in the kernel Jeremy Fitzhardinge
2006-08-27 9:49 ` Keith Owens
2006-08-27 10:01 ` Jeremy Fitzhardinge
2006-08-27 15:57 ` Andi Kleen
2006-08-27 16:36 ` Jeremy Fitzhardinge
2006-08-27 17:20 ` Jeremy Fitzhardinge
2006-08-27 18:19 ` Andi Kleen
2006-08-27 20:03 ` Jan Engelhardt
2006-08-27 23:38 ` Jeremy Fitzhardinge
2006-08-28 9:51 ` Jan Beulich
2006-08-28 14:54 ` H. J. Lu
2006-08-28 17:24 ` H. Peter Anvin
2006-08-27 8:44 ` [PATCH RFC 4/6] Fix places where using %gs changes the usermode ABI Jeremy Fitzhardinge
2006-08-27 15:59 ` Andi Kleen
2006-08-27 16:37 ` Jeremy Fitzhardinge
2006-08-27 8:44 ` [PATCH RFC 5/6] Implement smp_processor_id() with the PDA Jeremy Fitzhardinge
2006-08-27 8:44 ` [PATCH RFC 6/6] Implement "current" " Jeremy Fitzhardinge
2006-08-27 16:01 ` Andi Kleen
2006-08-27 16:38 ` Jeremy Fitzhardinge
2006-08-27 9:47 ` [PATCH RFC 0/6] Implement per-processor data areas for i386 Arjan van de Ven
2006-08-27 16:46 ` Jeremy Fitzhardinge
2006-08-27 17:44 ` Arjan van de Ven
2006-08-27 18:07 ` Andi Kleen
2006-08-27 18:27 ` Jeremy Fitzhardinge
2006-08-27 16:01 ` Andi Kleen
2006-08-27 16:41 ` Jeremy Fitzhardinge
2006-08-27 17:21 ` Andreas Mohr
2006-08-27 17:34 ` Jeremy Fitzhardinge
2006-08-27 18:23 ` Andreas Mohr
2006-08-27 18:04 ` Andi Kleen
2006-08-27 18:27 ` Andreas Mohr
2006-08-27 18:35 ` Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060827084450.991618709@goop.org \
--to=jeremy@goop.org \
--cc=76306.1226@compuserve.com \
--cc=ak@suse.de \
--cc=akpm@osdl.org \
--cc=jbeulich@novell.com \
--cc=linux-kernel@vger.kernel.org \
--cc=zach@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.