From: Kim Phillips <kim.phillips@freescale.com>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH] corrected PCI interrupt sense values to level low in mpc8349emds.dts
Date: Mon, 28 Aug 2006 17:49:10 -0500 [thread overview]
Message-ID: <20060828174910.236bf042.kim.phillips@freescale.com> (raw)
Corrected PCI interrupt sense values to level low in mpc8349emds.dts, per Leo's recommendation.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
---
applies on top of "[PATCH 4/4] Add MPC8349E MDS device tree source file to arch/powerpc/boot/dts"
arch/powerpc/boot/dts/mpc8349emds.dts | 112 +++++++++++++++++----------------
1 files changed, 56 insertions(+), 56 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts
index 7e4508b..0643db9 100644
--- a/arch/powerpc/boot/dts/mpc8349emds.dts
+++ b/arch/powerpc/boot/dts/mpc8349emds.dts
@@ -178,46 +178,46 @@
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 700 14 0
- 8800 0 0 2 700 15 0
- 8800 0 0 3 700 16 0
- 8800 0 0 4 700 17 0
+ 8800 0 0 1 700 14 2
+ 8800 0 0 2 700 15 2
+ 8800 0 0 3 700 16 2
+ 8800 0 0 4 700 17 2
/* IDSEL 0x12 */
- 9000 0 0 1 700 16 0
- 9000 0 0 2 700 17 0
- 9000 0 0 3 700 14 0
- 9000 0 0 4 700 15 0
+ 9000 0 0 1 700 16 2
+ 9000 0 0 2 700 17 2
+ 9000 0 0 3 700 14 2
+ 9000 0 0 4 700 15 2
/* IDSEL 0x13 */
- 9800 0 0 1 700 17 0
- 9800 0 0 2 700 14 0
- 9800 0 0 3 700 15 0
- 9800 0 0 4 700 16 0
+ 9800 0 0 1 700 17 2
+ 9800 0 0 2 700 14 2
+ 9800 0 0 3 700 15 2
+ 9800 0 0 4 700 16 2
/* IDSEL 0x15 */
- a800 0 0 1 700 14 0
- a800 0 0 2 700 15 0
- a800 0 0 3 700 16 0
- a800 0 0 4 700 17 0
+ a800 0 0 1 700 14 2
+ a800 0 0 2 700 15 2
+ a800 0 0 3 700 16 2
+ a800 0 0 4 700 17 2
/* IDSEL 0x16 */
- b000 0 0 1 700 17 0
- b000 0 0 2 700 14 0
- b000 0 0 3 700 15 0
- b000 0 0 4 700 16 0
+ b000 0 0 1 700 17 2
+ b000 0 0 2 700 14 2
+ b000 0 0 3 700 15 2
+ b000 0 0 4 700 16 2
/* IDSEL 0x17 */
- b800 0 0 1 700 16 0
- b800 0 0 2 700 17 0
- b800 0 0 3 700 14 0
- b800 0 0 4 700 15 0
+ b800 0 0 1 700 16 2
+ b800 0 0 2 700 17 2
+ b800 0 0 3 700 14 2
+ b800 0 0 4 700 15 2
/* IDSEL 0x18 */
- b000 0 0 1 700 15 0
- b000 0 0 2 700 16 0
- b000 0 0 3 700 17 0
- b000 0 0 4 700 14 0>;
+ b000 0 0 1 700 15 2
+ b000 0 0 2 700 16 2
+ b000 0 0 3 700 17 2
+ b000 0 0 4 700 14 2>;
interrupt-parent = <700>;
interrupts = <42 8>;
bus-range = <0 0>;
@@ -238,46 +238,46 @@
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 700 14 0
- 8800 0 0 2 700 15 0
- 8800 0 0 3 700 16 0
- 8800 0 0 4 700 17 0
+ 8800 0 0 1 700 14 2
+ 8800 0 0 2 700 15 2
+ 8800 0 0 3 700 16 2
+ 8800 0 0 4 700 17 2
/* IDSEL 0x12 */
- 9000 0 0 1 700 16 0
- 9000 0 0 2 700 17 0
- 9000 0 0 3 700 14 0
- 9000 0 0 4 700 15 0
+ 9000 0 0 1 700 16 2
+ 9000 0 0 2 700 17 2
+ 9000 0 0 3 700 14 2
+ 9000 0 0 4 700 15 2
/* IDSEL 0x13 */
- 9800 0 0 1 700 17 0
- 9800 0 0 2 700 14 0
- 9800 0 0 3 700 15 0
- 9800 0 0 4 700 16 0
+ 9800 0 0 1 700 17 2
+ 9800 0 0 2 700 14 2
+ 9800 0 0 3 700 15 2
+ 9800 0 0 4 700 16 2
/* IDSEL 0x15 */
- a800 0 0 1 700 14 0
- a800 0 0 2 700 15 0
- a800 0 0 3 700 16 0
- a800 0 0 4 700 17 0
+ a800 0 0 1 700 14 2
+ a800 0 0 2 700 15 2
+ a800 0 0 3 700 16 2
+ a800 0 0 4 700 17 2
/* IDSEL 0x16 */
- b000 0 0 1 700 17 0
- b000 0 0 2 700 14 0
- b000 0 0 3 700 15 0
- b000 0 0 4 700 16 0
+ b000 0 0 1 700 17 2
+ b000 0 0 2 700 14 2
+ b000 0 0 3 700 15 2
+ b000 0 0 4 700 16 2
/* IDSEL 0x17 */
- b800 0 0 1 700 16 0
- b800 0 0 2 700 17 0
- b800 0 0 3 700 14 0
- b800 0 0 4 700 15 0
+ b800 0 0 1 700 16 2
+ b800 0 0 2 700 17 2
+ b800 0 0 3 700 14 2
+ b800 0 0 4 700 15 2
/* IDSEL 0x18 */
- b000 0 0 1 700 15 0
- b000 0 0 2 700 16 0
- b000 0 0 3 700 17 0
- b000 0 0 4 700 14 0>;
+ b000 0 0 1 700 15 2
+ b000 0 0 2 700 16 2
+ b000 0 0 3 700 17 2
+ b000 0 0 4 700 14 2>;
interrupt-parent = <700>;
interrupts = <42 8>;
bus-range = <0 0>;
--
1.4.1
next reply other threads:[~2006-08-28 22:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-28 22:49 Kim Phillips [this message]
2006-08-29 2:32 ` [PATCH] corrected PCI interrupt sense values to level low inmpc8349emds.dts Liu Dave-r63238
2006-08-30 13:29 ` Kumar Gala
2006-08-31 2:29 ` Liu Dave-r63238
2006-08-31 3:28 ` [PATCH] corrected PCI interrupt sense values to level lowinmpc8349emds.dts Li Yang-r58472
2006-08-31 4:46 ` Liu Dave-r63238
2006-08-29 6:48 ` [PATCH] corrected PCI interrupt sense values to level low in mpc8349emds.dts Paul Mackerras
2006-08-29 15:27 ` Sergei Shtylyov
2006-08-29 15:35 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060828174910.236bf042.kim.phillips@freescale.com \
--to=kim.phillips@freescale.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.