From: "Bearcat M. Sandor" <Linux@feline-soul.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: bluez-users@lists.sourceforge.net
Subject: Re: [Bluez-users] How do I reset a pairing?
Date: Thu, 31 Aug 2006 11:50:37 -0600 [thread overview]
Message-ID: <200608311150.38005.Linux@feline-soul.com> (raw)
In-Reply-To: <1157022278.4026.118.camel@aeonflux.holtmann.net>
Marcel,
Thank you. Here is the output from hcidump -X -V:
11:46:21 root@linux:/home/bearcat# hcidump -X -V
HCI sniffer - Bluetooth packet analyzer ver 1.31
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0D:44:4F:37:72 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:0D:44:4F:37:72
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 41 mode 0x00 interval 0
Mode: Active
> HCI Event: Mode Change (0x14) plen 6
status 0x00 handle 41 mode 0x02 interval 126
Mode: Sniff
> HCI Event: Connect Complete (0x03) plen 11
status 0x22 handle 44 bdaddr 00:0D:44:4F:37:72 type ACL encrypt 0x00
Error: LMP Response Timeout
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0
> HCI Event: Command Complete (0x0e) plen 6
Read Voice Setting (0x03|0x0025) ncmd 1
status 0x00 voice setting 0x0060
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0D:44:4F:37:72 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:0D:44:4F:37:72
< HCI Command: Inquiry (0x01|0x0001) plen 5
lap 0x9e8b33 len 6 num 0
> HCI Event: Command Status (0x0f) plen 4
Inquiry (0x01|0x0001) status 0x00 ncmd 1
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:0D:44:4F:37:72 mode 1 clkoffset 0x50a7 class 0x200404
> HCI Event: Inquiry Complete (0x01) plen 1
status 0x00
> HCI Event: Connect Complete (0x03) plen 11
status 0x22 handle 45 bdaddr 00:0D:44:4F:37:72 type ACL encrypt 0x00
Error: LMP Response Timeout
Bearcat M. Sandor
On Thursday 31 August 2006 05:04 in an email titled "Re: [Bluez-users] How do
I reset a pairing?" Marcel Holtmann wrote:
>Hi Bearcat,
>
>
>run "hcidump -X -V". This output is not really helpful.
>
>Regards
>
>Marcel
--
Bearcat M. Sandor
Bearcat@feline-soul.com
Jabber: bearcat@jabber.feline-soul.net
ICQ: 6628727
MSN: bearcatsandor@hotmail.com
Yahoo: bearcatsandor
AIM: bearcatmsandor
next prev parent reply other threads:[~2006-08-31 17:50 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-23 8:29 [Bluez-users] How do I reset a pairing? jonny Linux
2006-08-27 12:18 ` jonny Linux
2006-08-28 12:17 ` Claudio Takahasi
2006-08-28 16:30 ` jonny Linux
2006-08-28 18:14 ` Claudio Takahasi
2006-08-28 18:45 ` Bearcat M. Sandor
2006-08-28 21:15 ` Marcel Holtmann
2006-08-28 19:39 ` Bearcat M. Sandor
2006-08-28 23:54 ` Marcel Holtmann
2006-08-28 22:24 ` Bearcat M. Sandor
2006-08-29 10:47 ` Marcel Holtmann
2006-08-29 17:03 ` jonny Linux
2006-08-29 20:34 ` Bearcat M. Sandor
2006-08-29 22:35 ` Marcel Holtmann
2006-08-29 20:52 ` Bearcat M. Sandor
2006-08-29 23:00 ` Marcel Holtmann
2006-08-29 21:32 ` Bearcat M. Sandor
2006-08-29 23:46 ` Marcel Holtmann
2006-08-29 22:05 ` Bearcat M. Sandor
2006-08-30 1:08 ` Bearcat M. Sandor
2006-08-30 3:30 ` manojt ambe
2006-08-30 9:52 ` Marcel Holtmann
2006-08-31 2:48 ` Bearcat M. Sandor
2006-08-31 11:04 ` Marcel Holtmann
2006-08-31 17:50 ` Bearcat M. Sandor [this message]
2006-08-31 22:08 ` Marcel Holtmann
2006-09-01 0:29 ` Bearcat M. Sandor
2006-09-01 11:04 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200608311150.38005.Linux@feline-soul.com \
--to=linux@feline-soul.com \
--cc=bluez-users@lists.sourceforge.net \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.