All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Hemminger <shemminger@osdl.org>
To: Stephen Hemminger <shemminger@osdl.org>
Cc: "David S. Miller" <davem@davemloft.net>,
	Jeff Garzik <jgarzik@pobox.com>,
	netdev@vger.kernel.org
Subject: [PATCH 2/2] loopback: minor statistics optimization
Date: Fri, 8 Sep 2006 11:20:56 -0700	[thread overview]
Message-ID: <20060908112056.7ef03bac@localhost.localdomain> (raw)
In-Reply-To: <20060908111613.12c1f9b8@localhost.localdomain>

Minor loopback enhancements for 2.6.19

The loopback device status structure is a singleton and doesn't
need to be allocated. Add ethtool_ops hooks to show checksum always on,
and make ethtool_ops const.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>


--- linux-2.6.orig/drivers/net/loopback.c
+++ linux-2.6/drivers/net/loopback.c
@@ -161,15 +161,13 @@ static int loopback_xmit(struct sk_buff 
 	return(0);
 }
 
+static struct net_device_stats loopback_stats;
+
 static struct net_device_stats *get_stats(struct net_device *dev)
 {
-	struct net_device_stats *stats = dev->priv;
+	struct net_device_stats *stats = &loopback_stats;
 	int i;
 
-	if (!stats) {
-		return NULL;
-	}
-
 	memset(stats, 0, sizeof(struct net_device_stats));
 
 	for_each_possible_cpu(i) {
@@ -185,19 +183,28 @@ static struct net_device_stats *get_stat
 	return stats;
 }
 
-static u32 loopback_get_link(struct net_device *dev)
+static u32 always_on(struct net_device *dev)
 {
 	return 1;
 }
 
-static struct ethtool_ops loopback_ethtool_ops = {
-	.get_link		= loopback_get_link,
+static const struct ethtool_ops loopback_ethtool_ops = {
+	.get_link		= always_on,
 	.get_tso		= ethtool_op_get_tso,
 	.set_tso		= ethtool_op_set_tso,
+	.get_tx_csum		= always_on,
+	.get_sg			= always_on,
+	.get_rx_csum		= always_on,
 };
 
+/*
+ * The loopback device is special. There is only one instance and
+ * it is statically allocated. Don't do this for other devices.
+ */
 struct net_device loopback_dev = {
 	.name	 		= "lo",
+	.get_stats		= &get_stats,
+	.priv			= &loopback_stats,
 	.mtu			= (16 * 1024) + 20 + 20 + 12,
 	.hard_start_xmit	= loopback_xmit,
 	.hard_header		= eth_header,
@@ -221,16 +228,6 @@ struct net_device loopback_dev = {
 /* Setup and register the loopback device. */
 int __init loopback_init(void)
 {
-	struct net_device_stats *stats;
-
-	/* Can survive without statistics */
-	stats = kmalloc(sizeof(struct net_device_stats), GFP_KERNEL);
-	if (stats) {
-		memset(stats, 0, sizeof(struct net_device_stats));
-		loopback_dev.priv = stats;
-		loopback_dev.get_stats = &get_stats;
-	}
-	
 	return register_netdev(&loopback_dev);
 };
 

  reply	other threads:[~2006-09-08 18:21 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-09-08 18:16 [PATCH 1/2] ethtool: allow const ethtool_ops Stephen Hemminger
2006-09-08 18:20 ` Stephen Hemminger [this message]
2006-09-28  3:04   ` [PATCH 2/2] loopback: minor statistics optimization David Miller
2006-09-28  3:13     ` Stephen Hemminger
2006-09-28  3:25       ` David Miller
2006-09-12 16:08 ` [PATCH 1/2] ethtool: allow const ethtool_ops Jeff Garzik
2006-09-13  2:08   ` Stephen Hemminger
2006-09-13  2:12     ` Jeff Garzik
2006-09-13  2:19       ` Stephen Hemminger
2006-09-13  5:09   ` Stephen Hemminger
2006-09-13  6:00     ` Jeff Garzik
2006-09-13 17:45 ` Jeff Garzik
2006-09-14  1:54   ` Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060908112056.7ef03bac@localhost.localdomain \
    --to=shemminger@osdl.org \
    --cc=davem@davemloft.net \
    --cc=jgarzik@pobox.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.