From mboxrd@z Thu Jan  1 00:00:00 1970
From: Rodolfo Giometti <giometti@linux.it>
Date: Tue, 12 Sep 2006 15:28:10 +0200
Subject: [U-Boot-Users] ethernet over usb
In-Reply-To: <4506B8A1.30703@eircom.net>
References: <20060912082649.GH9155@gundam.enneenne.com>
	<4506B6CC.9020306@eircom.net> <4506B8A1.30703@eircom.net>
Message-ID: <20060912132810.GC31470@gundam.enneenne.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Tue, Sep 12, 2006 at 02:39:45PM +0100, Bryan O'Donoghue wrote:
> 
> Since you want to TFTP over the USB, from your point of view, there is 
> no reason not to use CDC_ACM/g_serial and just do a kermit binary 
> transfer and save yourself the effort of doing Ethernet over the USB.
> 
> All you'd really have to do is implement usbdcore_au1100 and just do a 
> straight forward kermit binary transfer .. with the 8xx and both CDC_ACM 
> and g_serial, it works well enough for me.

Let me explain better my situation. My board have a serial line and an
USBdev as I/O interfaces. In linux I'm going to use the serial line
for the console and the USBdev for rootfs and other network
activities. I'd like to do the same into u-boot in order to have a
serial console and a TFTP file transfer.

Do you think that I can use the current implemented software (apart
the usbdcore_au1100) for my purposes?

> Still if you are going to do some of the ethernet side ... it would be a 
> good excuse for me, to stay out of the pub !

:)

Thanks,

Rodolfo

-- 

GNU/Linux Solutions                  e-mail:    giometti at enneenne.com
Linux Device Driver                             giometti at gnudd.com
Embedded Systems                     		giometti at linux.it
UNIX programming                     phone:     +39 349 2432127