From: Olaf Hering <olaf@aepfle.de>
To: Paul Mackeras <paulus@samba.org>, linuxppc-dev@ozlabs.org
Subject: [PATCH] update powerpc defconfig files after libata kconfig breakage
Date: Sun, 24 Sep 2006 20:53:29 +0200 [thread overview]
Message-ID: <20060924185329.GA10749@aepfle.de> (raw)
Update defconfig files after libata .config breakage
sed -i 's/CONFIG_SCSI_SATA_/CONFIG_SATA_/;s/CONFIG_SCSI_SATA/CONFIG_ATA/' arch/powerpc/configs/*g
Signed-off-by: Olaf Hering <olaf@aepfle.de>
---
arch/powerpc/configs/chrp32_defconfig | 2 +-
arch/powerpc/configs/g5_defconfig | 28 ++++++++++++++--------------
arch/powerpc/configs/iseries_defconfig | 2 +-
arch/powerpc/configs/mpc7448_hpc2_defconfig | 28 ++++++++++++++--------------
arch/powerpc/configs/mpc834x_itx_defconfig | 28 ++++++++++++++--------------
arch/powerpc/configs/pmac32_defconfig | 2 +-
arch/powerpc/configs/ppc64_defconfig | 28 ++++++++++++++--------------
arch/powerpc/configs/pseries_defconfig | 2 +-
8 files changed, 60 insertions(+), 60 deletions(-)
Index: linux-2.6/arch/powerpc/configs/chrp32_defconfig
===================================================================
--- linux-2.6.orig/arch/powerpc/configs/chrp32_defconfig
+++ linux-2.6/arch/powerpc/configs/chrp32_defconfig
@@ -492,7 +492,7 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_ATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
Index: linux-2.6/arch/powerpc/configs/g5_defconfig
===================================================================
--- linux-2.6.orig/arch/powerpc/configs/g5_defconfig
+++ linux-2.6/arch/powerpc/configs/g5_defconfig
@@ -490,23 +490,23 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-CONFIG_SCSI_SATA_SVW=y
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SVW=y
# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
Index: linux-2.6/arch/powerpc/configs/iseries_defconfig
===================================================================
--- linux-2.6.orig/arch/powerpc/configs/iseries_defconfig
+++ linux-2.6/arch/powerpc/configs/iseries_defconfig
@@ -475,7 +475,7 @@ CONFIG_SCSI_FC_ATTRS=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_ATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
Index: linux-2.6/arch/powerpc/configs/mpc7448_hpc2_defconfig
===================================================================
--- linux-2.6.orig/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ linux-2.6/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -413,23 +413,23 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-# CONFIG_SCSI_SATA_SVW is not set
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
-CONFIG_SCSI_SATA_MV=y
-# CONFIG_SCSI_SATA_NV is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
Index: linux-2.6/arch/powerpc/configs/mpc834x_itx_defconfig
===================================================================
--- linux-2.6.orig/arch/powerpc/configs/mpc834x_itx_defconfig
+++ linux-2.6/arch/powerpc/configs/mpc834x_itx_defconfig
@@ -464,23 +464,23 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-# CONFIG_SCSI_SATA_SVW is not set
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-CONFIG_SCSI_SATA_SIL=y
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
Index: linux-2.6/arch/powerpc/configs/pmac32_defconfig
===================================================================
--- linux-2.6.orig/arch/powerpc/configs/pmac32_defconfig
+++ linux-2.6/arch/powerpc/configs/pmac32_defconfig
@@ -682,7 +682,7 @@ CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_ATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
Index: linux-2.6/arch/powerpc/configs/ppc64_defconfig
===================================================================
--- linux-2.6.orig/arch/powerpc/configs/ppc64_defconfig
+++ linux-2.6/arch/powerpc/configs/ppc64_defconfig
@@ -520,23 +520,23 @@ CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-CONFIG_SCSI_SATA_SVW=y
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SVW=y
# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
Index: linux-2.6/arch/powerpc/configs/pseries_defconfig
===================================================================
--- linux-2.6.orig/arch/powerpc/configs/pseries_defconfig
+++ linux-2.6/arch/powerpc/configs/pseries_defconfig
@@ -506,7 +506,7 @@ CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_ATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
reply other threads:[~2006-09-24 18:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060924185329.GA10749@aepfle.de \
--to=olaf@aepfle.de \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.