From: Stefan Roese <sr@denx.de>
To: linuxppc-embedded@ozlabs.org
Subject: Re: Uncompressing Kernel Image ... Error: inflate() returned -3 GUNZIP ERROR - must RESET board to recover
Date: Thu, 28 Sep 2006 21:28:05 +0200 [thread overview]
Message-ID: <200609282128.06350.sr@denx.de> (raw)
In-Reply-To: <137d01c6e288$844fcdd0$8119fea9@deltatau.local>
Hi Henry,
On Thursday 28 September 2006 00:58, Henry Bausley wrote:
> Uncompressing Kernel Image ... Error: inflate() returned -3
> GUNZIP ERROR - must RESET board to recover
> OK
>
> when u-boot tries to uncompress the kernel. I am using a board based upon
> a Yosemite AMCC 440EP.
> I do have some boards that work. Does anyone know what could cause this
> problem. Bad Flash , Bad DDR ?
I would suspect a DDR problem. Please (re-)check your DDR setup and
configuration.
BTW: This is the wrong mailinglist. You should post to the U-Boot list
instead.
Best regards,
Stefan
next prev parent reply other threads:[~2006-09-28 19:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-26 6:44 Asterisk on Embedded Linux Iwan Koenig
2006-09-26 7:21 ` Armin Schindler
2006-09-26 16:37 ` Eugene Surovegin
2006-09-26 17:37 ` Carlos Munoz
2006-09-27 16:01 ` Stelios Koroneos
2006-09-27 22:58 ` Uncompressing Kernel Image ... Error: inflate() returned -3 GUNZIP ERROR - must RESET board to recover Henry Bausley
2006-09-28 19:28 ` Stefan Roese [this message]
2007-08-06 4:16 ` Nethra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200609282128.06350.sr@denx.de \
--to=sr@denx.de \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.