From: Frederik Deweerdt <deweerdt@free.fr>
To: Matthew Wilcox <matthew@wil.cx>
Cc: Arjan van de Ven <arjan@infradead.org>,
linux-scsi@vger.kernel.org,
"Linux-Kernel," <linux-kernel@vger.kernel.org>,
"J.A. Magall??n" <jamagallon@ono.com>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
Andrew Morton <akpm@osdl.org>, Jeff Garzik <jeff@garzik.org>
Subject: Re: [RFC PATCH] pci_request_irq (was [-mm patch] aic7xxx: check irq validity)
Date: Mon, 2 Oct 2006 21:09:49 +0000 [thread overview]
Message-ID: <20061002210949.GJ3003@slug> (raw)
In-Reply-To: <20061002181522.GL16272@parisc-linux.org>
On Mon, Oct 02, 2006 at 12:15:22PM -0600, Matthew Wilcox wrote:
> On Mon, Oct 02, 2006 at 08:00:48PM +0000, Frederik Deweerdt wrote:
> > /**
> > + * pci_request_irq - Reserve an IRQ for a PCI device
> > + * @pdev: The PCI device whose irq is to be reserved
> > + * handler: The interrupt handler function,
>
> > + * pci_get_drvdata(pdev) shall be passed as an argument to that function
>
> I don't think you can (or should) do this. Move it to the body of the
> comment below.
OK, thanks for pointing this, will do.
>
> > + * @flags: The flags to be passed to request_irq()
> > + * @name: The name of the device to be associated with the irq
> > + *
> > + * Returns 0 on success, or a negative value on error. A warning
> > + * message is also printed on failure.
> > + */
> > +int pci_request_irq(struct pci_dev *pdev,
> > + irqreturn_t (*handler)(int, void *, struct pt_regs *),
> > + unsigned long flags, const char *name)
> > +{
> > + int rc;
> > + const char *actual_name = name;
> > +
> > + rc = is_irq_valid(pdev->irq);
> > + if (!rc) {
> > + dev_printk(KERN_ERR, &pdev->dev, "invalid irq #%d\n", pdev->irq);
> > + return -EINVAL;
> > + }
>
> Why is that more readable than
>
> if (!is_irq_valid(pdev->irq)) {
> dev_err(&pdev->dev, "invalid irq #%d\n", pdev->irq);
> return -EINVAL;
> }
>
Better too.
> > + if (!actual_name)
> > + actual_name = pci_name(pdev);
> > +
> > + return request_irq(pdev->irq, handler, flags | IRQF_SHARED,
> > + actual_name, pci_get_drvdata(pdev));
>
> The driver name is a far more common usage than the pci_name.
>
> return request_irq(pdev->irq, handler, flags | IRQF_SHARED,
> name ? name : pdev->driver->name,
> pci_get_drvdata(pdev));
OK, thanks for the feedback,
Frederik
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2006-10-02 19:11 UTC|newest]
Thread overview: 140+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-28 8:46 2.6.18-mm2 Andrew Morton
2006-09-28 11:54 ` 2.6.18-mm2 Michal Piotrowski
2006-09-29 12:12 ` md deadlock (was Re: 2.6.18-mm2) Peter Zijlstra
2006-09-29 12:52 ` Neil Brown
2006-09-29 14:03 ` Peter Zijlstra
2006-10-02 13:47 ` Peter Zijlstra
2006-10-10 3:53 ` Neil Brown
2006-10-10 6:42 ` Ingo Molnar
2006-09-28 17:50 ` 2.6.18-mm2 Steve Fox
2006-09-28 19:00 ` 2.6.18-mm2 thunder7
2006-09-28 21:01 ` 2.6.18-mm2 Andrew Morton
2006-09-28 22:45 ` 2.6.18-mm2 Stephen Hemminger
2006-10-04 13:42 ` 2.6.18-mm2 boot failure on x86-64 Steve Fox
2006-10-04 15:45 ` Andrew Morton
2006-10-04 15:55 ` Vivek Goyal
2006-10-04 15:56 ` Andi Kleen
2006-10-05 1:57 ` Keith Mannthey
2006-10-04 16:41 ` Steve Fox
2006-10-05 0:06 ` Andrew Morton
2006-10-05 0:51 ` Vivek Goyal
2006-10-05 0:57 ` Andi Kleen
2006-10-05 1:08 ` Martin Bligh
2006-10-05 2:05 ` Keith Mannthey
2006-10-05 14:53 ` Steve Fox
2006-10-05 15:12 ` Badari Pulavarty
2006-10-05 15:32 ` Steve Fox
2006-10-05 15:40 ` Andi Kleen
2006-10-05 17:57 ` Steve Fox
2006-10-05 18:27 ` Andi Kleen
2006-10-05 18:51 ` Steve Fox
2006-10-05 19:05 ` Andi Kleen
2006-10-05 20:42 ` Steve Fox
2006-10-05 20:50 ` Andi Kleen
2006-10-06 2:23 ` Steve Fox
2006-10-06 14:33 ` Mel Gorman
2006-10-06 15:36 ` Vivek Goyal
2006-10-06 17:11 ` Mel Gorman
2006-10-06 17:34 ` Vivek Goyal
2006-10-06 17:59 ` Vivek Goyal
2006-10-06 18:03 ` Steve Fox
2006-10-06 20:04 ` Vivek Goyal
2006-10-09 9:53 ` Mel Gorman
2006-10-16 18:16 ` Vivek Goyal
2006-10-16 23:58 ` Andrew Morton
2006-10-17 12:18 ` Adrian Bunk
2006-10-17 17:32 ` Mel Gorman
2006-10-05 18:52 ` Vivek Goyal
2006-10-05 19:08 ` Andi Kleen
2006-10-05 20:25 ` Steve Fox
2006-10-05 20:39 ` Mel Gorman
2006-10-05 20:51 ` Andi Kleen
2006-10-05 23:14 ` 2.6.18-mm2 boot failure on x86-64 II Andi Kleen
2006-10-05 23:32 ` keith mannthey
2006-10-05 23:35 ` Andi Kleen
2006-10-05 23:58 ` keith mannthey
2006-10-06 0:02 ` Badari Pulavarty
2006-10-06 0:12 ` Andrew Morton
2006-09-28 22:39 ` 2.6.18-mm2 Jim Cromie
2006-09-28 23:08 ` 2.6.18-mm2 Andi Kleen
2006-09-29 20:14 ` 2.6.18-mm2 Ingo Molnar
2006-09-29 20:36 ` 2.6.18-mm2 Andi Kleen
2006-09-29 20:32 ` 2.6.18-mm2 Ingo Molnar
2006-09-29 20:58 ` 2.6.18-mm2 Andi Kleen
2006-09-29 21:14 ` [patch] fix !apic build breakage Ingo Molnar
2006-09-29 21:44 ` Andi Kleen
2006-09-29 21:41 ` Ingo Molnar
2006-09-29 21:44 ` 2.6.18-mm2 Alan Cox
2006-09-29 21:36 ` 2.6.18-mm2 Dave Jones
2006-09-29 21:46 ` 2.6.18-mm2 Andi Kleen
2006-09-28 22:44 ` 2.6.18-mm2 Matthias Hentges
2006-09-29 3:19 ` 2.6.18-mm2 - oops in cache_alloc_refill() Valdis.Kletnieks
2006-09-29 3:29 ` Andrew Morton
2006-09-29 3:58 ` Valdis.Kletnieks
2006-09-29 15:19 ` Valdis.Kletnieks
2006-09-29 19:45 ` Andrew Morton
2006-09-30 0:01 ` Valdis.Kletnieks
2006-09-30 1:20 ` Andrew Morton
2006-09-30 1:33 ` Jean Tourrilhes
2006-09-30 3:31 ` Valdis.Kletnieks
2006-09-30 7:50 ` Valdis.Kletnieks
2006-09-30 8:33 ` Andrew Morton
2006-09-30 1:40 ` Jean Tourrilhes
2006-09-30 3:31 ` Valdis.Kletnieks
2006-09-30 1:57 ` Makefile for linux modules x z
2006-09-30 8:55 ` Sam Ravnborg
2006-09-30 1:59 ` x z
2006-10-02 17:52 ` 2.6.18-mm2 - oops in cache_alloc_refill() Jean Tourrilhes
2006-10-02 19:57 ` Valdis.Kletnieks
2006-10-03 15:58 ` Samuel Tardieu
2006-10-03 16:34 ` Jean Tourrilhes
2006-10-03 16:45 ` Samuel Tardieu
2006-10-03 17:07 ` Jean Tourrilhes
2006-10-05 22:37 ` Pavel Roskin
2006-10-05 22:42 ` Jean Tourrilhes
2006-09-29 19:47 ` Christoph Lameter
2006-09-29 13:57 ` 2.6.18-mm2 J.A. Magallón
2006-09-29 14:39 ` 2.6.18-mm2 Matthew Wilcox
2006-09-29 17:15 ` 2.6.18-mm2 Alan Cox
2006-09-29 23:50 ` 2.6.18-mm2 Frederik Deweerdt
2006-09-29 23:43 ` 2.6.18-mm2 Alan Cox
2006-09-30 14:09 ` [-mm patch] aic7xxx: check irq validity (was Re: 2.6.18-mm2) Frederik Deweerdt
2006-09-30 14:19 ` Alan Cox
2006-09-30 13:51 ` Willy Tarreau
2006-09-30 23:58 ` Jeff Garzik
2006-10-01 14:28 ` Matthew Wilcox
2006-10-01 19:05 ` Arjan van de Ven
2006-10-01 19:19 ` Jeff Garzik
2006-10-01 19:34 ` Arjan van de Ven
2006-10-01 19:36 ` Matthew Wilcox
2006-10-01 19:42 ` Jeff Garzik
2006-10-02 2:12 ` Arjan van de Ven
2006-10-02 20:00 ` [RFC PATCH] pci_request_irq (was [-mm patch] aic7xxx: check irq validity) Frederik Deweerdt
2006-10-02 18:15 ` Matthew Wilcox
2006-10-02 21:09 ` Frederik Deweerdt [this message]
2006-10-02 20:07 ` [RFC PATCH] move aic7xxx to pci_request_irq Frederik Deweerdt
2006-10-02 18:27 ` Matthew Wilcox
2006-10-02 21:02 ` Frederik Deweerdt
2006-10-03 3:45 ` Arjan van de Ven
2006-10-02 20:11 ` [RFC PATCH] move tg3 " Frederik Deweerdt
2006-10-02 18:28 ` Matthew Wilcox
2006-10-02 21:04 ` Frederik Deweerdt
2006-10-03 7:18 ` Arjan van de Ven
2006-10-02 20:12 ` [RFC PATCH] move drm " Frederik Deweerdt
2006-10-02 18:37 ` Matthew Wilcox
2006-10-02 21:07 ` Frederik Deweerdt
2006-10-02 20:36 ` Alan Cox
2006-10-02 22:26 ` Frederik Deweerdt
2006-10-02 23:54 ` Dave Airlie
2006-10-03 7:17 ` Frederik Deweerdt
2006-10-03 3:58 ` [RFC PATCH] pci_request_irq (was [-mm patch] aic7xxx: check irq validity) Randy Dunlap
2006-10-01 21:31 ` [-mm patch] aic7xxx: check irq validity (was Re: 2.6.18-mm2) Frederik Deweerdt
2006-09-30 15:26 ` 2.6.18-mm2 James Bottomley
2006-09-30 16:21 ` 2.6.18-mm2 Matthew Wilcox
2006-09-30 17:20 ` 2.6.18-mm2 Mark Rustad
2006-09-30 20:54 ` 2.6.18-mm2 Alan Cox
2006-09-29 23:15 ` 2.6.18-mm2 J.A. Magallón
2006-09-30 7:04 ` 2.6.18-mm2 - possible recursive locking detected Borislav Petkov
2006-09-30 8:28 ` Andrew Morton
2006-09-30 18:19 ` Davide Libenzi
[not found] ` <20060930133706.GA3291@melchior.yamamaya.is-a-geek.org>
2006-09-30 19:53 ` 2.6.18-mm2 Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061002210949.GJ3003@slug \
--to=deweerdt@free.fr \
--cc=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=arjan@infradead.org \
--cc=jamagallon@ono.com \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=matthew@wil.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.