From: "Armin Steck" <steck.armin@gmx.de>
To: linuxppc-embedded@ozlabs.org
Subject: uboot-1.1.4 linux-2.6.10: Image bootproblems
Date: Wed, 04 Oct 2006 11:04:25 +0200 [thread overview]
Message-ID: <20061004090425.57760@gmx.net> (raw)
Hello,
i have ported uboot1.1.4 for my board.
When i would like to boot linux-kernel-2.6.10 the system hang after decompressing.
can anybody help me?
Flash: 0x00000000 uboot
0x00020000 ubootenvironment
0x00040000 kernel uImage
uImage: gzip -9 < zImage > Image.gz
/elinux/kernel2.6Richard/Richard/linux-2.6.10/scripts/mkuboot.sh
-A arm -O linux -T kernel -C gzip -a 0xa0008000 -e 0xa0008000 -n
'Linux-2.6.10' -d Image.gz uImage
U-BOOT output:
RAM Configuration:
Bank #0: a0000000 32 MB
Flash #0: 00000000 16 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 1
uboot==> bootm 0x00040000
## Booting image at 00040000 ...
Image Name: Linux-2.6.10
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 756009 Bytes = 738.3 kB
Load Address: a0008000
Entry Point: a0008000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
Uncompressing Linux................................................... done, booting the kernel.
69052D06:0000001B:00001078 #Kernel-Debug-Information
A00DC914-A0259594>A0008000
A0259594
--
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
next reply other threads:[~2006-10-04 9:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-04 9:04 Armin Steck [this message]
2006-10-04 15:40 ` uboot-1.1.4 linux-2.6.10: Image bootproblems Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061004090425.57760@gmx.net \
--to=steck.armin@gmx.de \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.