From: malahal@us.ibm.com
To: linux-scsi@vger.kernel.org
Subject: [PATCH 2/2] aic94xx SCSI timeout fix: SMP retry fix.
Date: Wed, 4 Oct 2006 17:34:03 -0700 [thread overview]
Message-ID: <20061005003403.GB21898@us.ibm.com> (raw)
In-Reply-To: <20061005002837.GA21898@us.ibm.com>
Updating DDB0 inside aic94xx driver itself caused SMP command timeout. I
hit this SMP timeout problem twice but I am not able to reproduce it since
then. Here is a fix that retries an SMP command.
igned-off-by: Malahal Naineni <malahal@us.ibm.com>
diff -r 42e5e02e2d2d drivers/scsi/libsas/sas_expander.c
--- a/drivers/scsi/libsas/sas_expander.c Wed Oct 04 10:04:48 2006 -0700
+++ b/drivers/scsi/libsas/sas_expander.c Wed Oct 04 13:43:34 2006 -0700
@@ -71,55 +71,65 @@ static int smp_execute_task(struct domai
static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
void *resp, int resp_size)
{
- int res;
- struct sas_task *task = sas_alloc_task(GFP_KERNEL);
+ int res, retry;
+ struct sas_task *task = NULL;
struct sas_internal *i =
to_sas_internal(dev->port->ha->core.shost->transportt);
- if (!task)
- return -ENOMEM;
-
- task->dev = dev;
- task->task_proto = dev->tproto;
- sg_init_one(&task->smp_task.smp_req, req, req_size);
- sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
-
- task->task_done = smp_task_done;
-
- task->timer.data = (unsigned long) task;
- task->timer.function = smp_task_timedout;
- task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
- add_timer(&task->timer);
-
- res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
-
- if (res) {
- del_timer(&task->timer);
- SAS_DPRINTK("executing SMP task failed:%d\n", res);
- goto ex_err;
- }
-
- wait_for_completion(&task->completion);
- res = -ETASK;
- if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
- SAS_DPRINTK("smp task timed out or aborted\n");
- i->dft->lldd_abort_task(task);
- if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
- SAS_DPRINTK("SMP task aborted and not done\n");
+ for (retry = 0; retry < 3; retry++) {
+ task = sas_alloc_task(GFP_KERNEL);
+ if (!task)
+ return -ENOMEM;
+
+ task->dev = dev;
+ task->task_proto = dev->tproto;
+ sg_init_one(&task->smp_task.smp_req, req, req_size);
+ sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
+
+ task->task_done = smp_task_done;
+
+ task->timer.data = (unsigned long) task;
+ task->timer.function = smp_task_timedout;
+ task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
+ add_timer(&task->timer);
+
+ res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
+
+ if (res) {
+ del_timer(&task->timer);
+ SAS_DPRINTK("executing SMP task failed:%d\n", res);
goto ex_err;
}
- }
- if (task->task_status.resp == SAS_TASK_COMPLETE &&
- task->task_status.stat == SAM_GOOD)
- res = 0;
- else
- SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
- "status 0x%x\n", __FUNCTION__,
- SAS_ADDR(dev->sas_addr),
- task->task_status.resp,
- task->task_status.stat);
+
+ wait_for_completion(&task->completion);
+ res = -ETASK;
+ if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ SAS_DPRINTK("smp task timed out or aborted\n");
+ i->dft->lldd_abort_task(task);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ SAS_DPRINTK("SMP task aborted and not done\n");
+ goto ex_err;
+ }
+ }
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAM_GOOD) {
+ res = 0;
+ break;
+ } else {
+ SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
+ "status 0x%x\n", __FUNCTION__,
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat);
+ sas_free_task(task);
+ task = NULL;
+ }
+ }
ex_err:
- sas_free_task(task);
+ BUG_ON(retry == 3 && task != NULL);
+ if (task != NULL) {
+ sas_free_task(task);
+ }
return res;
}
prev parent reply other threads:[~2006-10-05 0:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-05 0:28 [PATCH 1/2] aic94xx SCSI timeout fix malahal
2006-10-05 0:34 ` malahal [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061005003403.GB21898@us.ibm.com \
--to=malahal@us.ibm.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.