All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joerg Roedel <joro-lkml@zlug.org>
To: "YOSHIFUJI Hideaki / ?$B5HF#1QL@" <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	davem@davemloft.net
Subject: Re: [PATCH 01/02] net/ipv6: seperate sit driver to extra module
Date: Fri, 6 Oct 2006 17:15:56 +0200	[thread overview]
Message-ID: <20061006151556.GA15637@zlug.org> (raw)
In-Reply-To: <20061006.215935.92667295.yoshfuji@linux-ipv6.org>

[-- Attachment #1: Type: text/plain, Size: 257 bytes --]

On Fri, Oct 06, 2006 at 09:59:35PM +0900, YOSHIFUJI Hideaki / ?$B5HF#1QL@ wrote:

> > +         into IPv4 packets. This is usefull if you want to connect two IPv6

Argh. Bad typo. I appended the fixed patch

Signed-off-by: Joerg Roedel <joro-lkml@zlug.org>

[-- Attachment #2: patch_sit_as_module --]
[-- Type: text/plain, Size: 2917 bytes --]

diff -upr -X linux-2.6.18/Documentation/dontdiff linux-2.6.18-vanilla/net/ipv6/af_inet6.c linux-2.6.18/net/ipv6/af_inet6.c
--- linux-2.6.18-vanilla/net/ipv6/af_inet6.c	2006-09-20 05:42:06.000000000 +0200
+++ linux-2.6.18/net/ipv6/af_inet6.c	2006-10-05 16:55:02.000000000 +0200
@@ -849,7 +849,6 @@ static int __init inet6_init(void)
 	err = addrconf_init();
 	if (err)
 		goto addrconf_fail;
-	sit_init();
 
 	/* Init v6 extension headers. */
 	ipv6_rthdr_init();
@@ -920,7 +919,6 @@ static void __exit inet6_exit(void)
  	raw6_proc_exit();
 #endif
 	/* Cleanup code parts. */
-	sit_cleanup();
 	ip6_flowlabel_cleanup();
 	addrconf_cleanup();
 	ip6_route_cleanup();
diff -upr -X linux-2.6.18/Documentation/dontdiff linux-2.6.18-vanilla/net/ipv6/Kconfig linux-2.6.18/net/ipv6/Kconfig
--- linux-2.6.18-vanilla/net/ipv6/Kconfig	2006-09-20 05:42:06.000000000 +0200
+++ linux-2.6.18/net/ipv6/Kconfig	2006-10-05 18:14:57.000000000 +0200
@@ -126,6 +126,19 @@ config INET6_XFRM_MODE_TUNNEL
 
 	  If unsure, say Y.
 
+config IPV6_SIT
+	tristate "IPv6: IPv6-in-IPv4 tunnel (SIT driver)"
+	depends on IPV6
+	default y
+	---help---
+	  Tunneling means encapsulating data of one protocol type within
+	  another protocol and sending it over a channel that understands the
+	  encapsulating protocol. This driver implements encapsulation of IPv6
+	  into IPv4 packets. This is useful if you want to connect two IPv6
+	  networks over an IPv4-only path.
+
+	  Saying M here will produce a module called sit.ko. If unsure, say N.
+
 config IPV6_TUNNEL
 	tristate "IPv6: IPv6-in-IPv6 tunnel"
 	select INET6_TUNNEL
diff -upr -X linux-2.6.18/Documentation/dontdiff linux-2.6.18-vanilla/net/ipv6/Makefile linux-2.6.18/net/ipv6/Makefile
--- linux-2.6.18-vanilla/net/ipv6/Makefile	2006-09-20 05:42:06.000000000 +0200
+++ linux-2.6.18/net/ipv6/Makefile	2006-10-05 17:10:42.000000000 +0200
@@ -4,7 +4,7 @@
 
 obj-$(CONFIG_IPV6) += ipv6.o
 
-ipv6-objs :=	af_inet6.o anycast.o ip6_output.o ip6_input.o addrconf.o sit.o \
+ipv6-objs :=	af_inet6.o anycast.o ip6_output.o ip6_input.o addrconf.o \
 		route.o ip6_fib.o ipv6_sockglue.o ndisc.o udp.o raw.o \
 		protocol.o icmp.o mcast.o reassembly.o tcp_ipv6.o \
 		exthdrs.o sysctl_net_ipv6.o datagram.o proc.o \
@@ -24,6 +24,7 @@ obj-$(CONFIG_INET6_XFRM_MODE_TRANSPORT) 
 obj-$(CONFIG_INET6_XFRM_MODE_TUNNEL) += xfrm6_mode_tunnel.o
 obj-$(CONFIG_NETFILTER)	+= netfilter/
 
+obj-$(CONFIG_IPV6_SIT) += sit.o
 obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel.o
 
 obj-y += exthdrs_core.o
diff -upr -X linux-2.6.18/Documentation/dontdiff linux-2.6.18-vanilla/net/ipv6/sit.c linux-2.6.18/net/ipv6/sit.c
--- linux-2.6.18-vanilla/net/ipv6/sit.c	2006-09-20 05:42:06.000000000 +0200
+++ linux-2.6.18/net/ipv6/sit.c	2006-10-05 16:55:02.000000000 +0200
@@ -850,3 +850,6 @@ int __init sit_init(void)
 	inet_del_protocol(&sit_protocol, IPPROTO_IPV6);
 	goto out;
 }
+
+module_init(sit_init);
+module_exit(sit_cleanup);

  reply	other threads:[~2006-10-06 15:15 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-10-06  9:34 [PATCH 01/02] net/ipv6: seperate sit driver to extra module Joerg Roedel
2006-10-06 11:38 ` Samuel Tardieu
2006-10-06 11:38   ` Samuel Tardieu
2006-10-06 11:44   ` Peter Bieringer
2006-10-06 12:09   ` Joerg Roedel
2006-10-06 12:24     ` Samuel Tardieu
2006-10-06 12:24       ` Samuel Tardieu
2006-10-06 12:59 ` YOSHIFUJI Hideaki / 吉藤英明
2006-10-06 15:15   ` Joerg Roedel [this message]
2006-10-07  5:05     ` Bill Fink
2006-10-07  5:32       ` James Morris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20061006151556.GA15637@zlug.org \
    --to=joro-lkml@zlug.org \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.