From: Martin Lorenz <martin@lorenz.eu.org>
To: linux-kernel@vger.kernel.org
Subject: 2.6.18 - another DWARF2
Date: Tue, 17 Oct 2006 08:37:10 +0200 [thread overview]
Message-ID: <20061017063710.GA27139@gimli> (raw)
just got the following on resume:
[87026.242000] usb 4-2: USB disconnect, address 18
[87026.448000] usb 4-2: new full speed USB device using uhci_hcd and address
20
[87026.613000] usb 4-2: configuration #1 chosen from 1 choice
[87026.704000] IRQ handler type mismatch for IRQ 90
[87026.704000] [<c0103d7c>] show_trace_log_lvl+0x5b/0x16d
[87026.704000] [<c01044cb>] show_trace+0xf/0x11
[87026.705000] [<c01045ce>] dump_stack+0x15/0x17
[87026.705000] [<c01403d7>] setup_irq+0x17d/0x190
[87026.705000] [<c0140466>] request_irq+0x7c/0x98
[87026.706000] [<c0251745>] e1000_open+0xcd/0x1a4
[87026.707000] [<c029565c>] dev_open+0x2b/0x62
[87026.708000] [<c0294181>] dev_change_flags+0x47/0xe4
[87026.709000] [<c02c7cd1>] devinet_ioctl+0x252/0x556
[87026.711000] [<c028b5a3>] sock_ioctl+0x19a/0x1be
[87026.712000] [<c016b6af>] do_ioctl+0x1f/0x62
[87026.712000] [<c016b937>] vfs_ioctl+0x245/0x257
[87026.713000] [<c016b995>] sys_ioctl+0x4c/0x67
[87026.714000] [<c0102db3>] syscall_call+0x7/0xb
[87026.714000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[87026.715000] Leftover inexact backtrace:
[87026.715000] e1000: eth0: e1000_request_irq: Unable to allocate interrupt
Error: -16
[87027.026000] usb 4-1: new full speed USB device using uhci_hcd and address
21
[87027.055000] ata1: waiting for device to spin up (7 secs)
[87027.186000] usb 4-1: configuration #1 chosen from 1 choice
[87027.757000] IRQ handler type mismatch for IRQ 98
[87027.757000] [<c0103d7c>] show_trace_log_lvl+0x5b/0x16d
[87027.757000] [<c01044cb>] show_trace+0xf/0x11
[87027.758000] [<c01045ce>] dump_stack+0x15/0x17
[87027.758000] [<c01403d7>] setup_irq+0x17d/0x190
[87027.758000] [<c0140466>] request_irq+0x7c/0x98
[87027.759000] [<c0251745>] e1000_open+0xcd/0x1a4
[87027.760000] [<c029565c>] dev_open+0x2b/0x62
[87027.761000] [<c0294181>] dev_change_flags+0x47/0xe4
[87027.762000] [<c02c7cd1>] devinet_ioctl+0x252/0x556
[87027.764000] [<c028b5a3>] sock_ioctl+0x19a/0x1be
[87027.765000] [<c016b6af>] do_ioctl+0x1f/0x62
[87027.766000] [<c016b937>] vfs_ioctl+0x245/0x257
[87027.766000] [<c016b995>] sys_ioctl+0x4c/0x67
[87027.767000] [<c0102db3>] syscall_call+0x7/0xb
[87027.767000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[87027.767000] Leftover inexact backtrace:
[87027.767000] e1000: eth0: e1000_request_irq: Unable to allocate interrupt
Error: -16
[87028.810000] IRQ handler type mismatch for IRQ 106
[87028.810000] [<c0103d7c>] show_trace_log_lvl+0x5b/0x16d
[87028.810000] [<c01044cb>] show_trace+0xf/0x11
[87028.811000] [<c01045ce>] dump_stack+0x15/0x17
[87028.811000] [<c01403d7>] setup_irq+0x17d/0x190
[87028.811000] [<c0140466>] request_irq+0x7c/0x98
[87028.812000] [<c0251745>] e1000_open+0xcd/0x1a4
[87028.813000] [<c029565c>] dev_open+0x2b/0x62
[87028.814000] [<c0294181>] dev_change_flags+0x47/0xe4
[87028.815000] [<c02c7cd1>] devinet_ioctl+0x252/0x556
[87028.817000] [<c028b5a3>] sock_ioctl+0x19a/0x1be
[87028.818000] [<c016b6af>] do_ioctl+0x1f/0x62
[87028.818000] [<c016b937>] vfs_ioctl+0x245/0x257
[87028.819000] [<c016b995>] sys_ioctl+0x4c/0x67
[87028.820000] [<c0102db3>] syscall_call+0x7/0xb
[87028.820000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[87028.820000] Leftover inexact backtrace:
[87028.820000] e1000: eth0: e1000_request_irq: Unable to allocate interrupt
Error: -16
[87029.863000] IRQ handler type mismatch for IRQ 114
[87029.863000] [<c0103d7c>] show_trace_log_lvl+0x5b/0x16d
[87029.863000] [<c01044cb>] show_trace+0xf/0x11
[87029.864000] [<c01045ce>] dump_stack+0x15/0x17
[87029.864000] [<c01403d7>] setup_irq+0x17d/0x190
[87029.864000] [<c0140466>] request_irq+0x7c/0x98
[87029.865000] [<c0251745>] e1000_open+0xcd/0x1a4
[87029.866000] [<c029565c>] dev_open+0x2b/0x62
[87029.867000] [<c0294181>] dev_change_flags+0x47/0xe4
[87029.868000] [<c02c7cd1>] devinet_ioctl+0x252/0x556
[87029.870000] [<c028b5a3>] sock_ioctl+0x19a/0x1be
[87029.871000] [<c016b6af>] do_ioctl+0x1f/0x62
[87029.871000] [<c016b937>] vfs_ioctl+0x245/0x257
[87029.872000] [<c016b995>] sys_ioctl+0x4c/0x67
[87029.873000] [<c0102db3>] syscall_call+0x7/0xb
[87029.873000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[87029.873000] Leftover inexact backtrace:
[87029.873000] e1000: eth0: e1000_request_irq: Unable to allocate interrupt
Error: -16
[87030.917000] IRQ handler type mismatch for IRQ 122
[87030.917000] [<c0103d7c>] show_trace_log_lvl+0x5b/0x16d
[87030.917000] [<c01044cb>] show_trace+0xf/0x11
[87030.918000] [<c01045ce>] dump_stack+0x15/0x17
[87030.918000] [<c01403d7>] setup_irq+0x17d/0x190
[87030.918000] [<c0140466>] request_irq+0x7c/0x98
[87030.919000] [<c0251745>] e1000_open+0xcd/0x1a4
[87030.920000] [<c029565c>] dev_open+0x2b/0x62
[87030.921000] [<c0294181>] dev_change_flags+0x47/0xe4
[87030.922000] [<c02c7cd1>] devinet_ioctl+0x252/0x556
[87030.924000] [<c028b5a3>] sock_ioctl+0x19a/0x1be
[87030.925000] [<c016b6af>] do_ioctl+0x1f/0x62
[87030.925000] [<c016b937>] vfs_ioctl+0x245/0x257
[87030.926000] [<c016b995>] sys_ioctl+0x4c/0x67
[87030.927000] [<c0102db3>] syscall_call+0x7/0xb
[87030.927000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[87030.927000] Leftover inexact backtrace:
[87030.927000] e1000: eth0: e1000_request_irq: Unable to allocate interrupt
Error: -16
[87031.970000] IRQ handler type mismatch for IRQ 130
[87031.970000] [<c0103d7c>] show_trace_log_lvl+0x5b/0x16d
[87031.970000] [<c01044cb>] show_trace+0xf/0x11
[87031.971000] [<c01045ce>] dump_stack+0x15/0x17
[87031.971000] [<c01403d7>] setup_irq+0x17d/0x190
[87031.971000] [<c0140466>] request_irq+0x7c/0x98
[87031.972000] [<c0251745>] e1000_open+0xcd/0x1a4
[87031.973000] [<c029565c>] dev_open+0x2b/0x62
[87031.974000] [<c0294181>] dev_change_flags+0x47/0xe4
[87031.975000] [<c02c7cd1>] devinet_ioctl+0x252/0x556
[87031.977000] [<c028b5a3>] sock_ioctl+0x19a/0x1be
[87031.978000] [<c016b6af>] do_ioctl+0x1f/0x62
[87031.978000] [<c016b937>] vfs_ioctl+0x245/0x257
[87031.979000] [<c016b995>] sys_ioctl+0x4c/0x67
[87031.980000] [<c0102db3>] syscall_call+0x7/0xb
[87031.980000] DWARF2 unwinder stuck at syscall_call+0x7/0xb
[87031.980000] Leftover inexact backtrace:
[87031.980000] e1000: eth0: e1000_request_irq: Unable to allocate interrupt
Error: -16
[87034.525000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
full dmesg is at
http://www.lorenz.eu.org/~mlo/kernel/dmesg_2.6.18-ie-la-tp-41.5+0813.boot
(boot time) and
http://www.lorenz.eu.org/~mlo/kernel/dmesg_2.6.18-ie-la-tp-41.5+0813.out
(runtime)
gruss
mlo
--
Dipl.-Ing. Martin Lorenz
They that can give up essential liberty
to obtain a little temporary safety
deserve neither liberty nor safety.
Benjamin Franklin
please encrypt your mail to me
GnuPG key-ID: F1AAD37D
get it here:
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0xF1AAD37D
ICQ UIN: 33588107
next reply other threads:[~2006-10-17 6:40 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-17 6:37 Martin Lorenz [this message]
2006-10-17 18:52 ` 2.6.18 - another DWARF2 Jesse Brandeburg
2006-10-18 6:34 ` un/shared IRQ problem (was: Re: 2.6.18 - another DWARF2) Martin Lorenz
2006-10-19 6:26 ` Andrew Morton
2006-10-19 6:39 ` Martin Lorenz
2006-10-19 7:01 ` Andrew Morton
2006-10-19 14:48 ` Eric W. Biederman
2006-10-19 17:14 ` Andrew Morton
2006-10-20 8:37 ` Martin Lorenz
2006-10-20 8:47 ` Andrew Morton
2006-10-20 9:17 ` Martin Lorenz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061017063710.GA27139@gimli \
--to=martin@lorenz.eu.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.