From mboxrd@z Thu Jan 1 00:00:00 1970 From: Per =?iso-8859-1?q?=D8yvind_Karlsen?= Date: Wed, 18 Oct 2006 19:36:16 +0000 Subject: Re: Problems booting 2.6.18 on SunBlade 100/150 Message-Id: <200610182136.17529.pkarlsen@mandriva.com> List-Id: References: <200401070729.56891.pkarlsen@mandriva.com> In-Reply-To: <200401070729.56891.pkarlsen@mandriva.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: sparclinux@vger.kernel.org Onsdag 18 oktober 2006 21:30, skrev David Miller: > From: Jim Watson > Date: Wed, 18 Oct 2006 21:50:24 +1000 > > > David, thanks - I tried the patch on 2.6.18 but it still hangs up for > > me. This is not conclusive however as I could not get my build of > > 2.6.16 to run either. The output from the regs remains as before. > > It should remain the same. > > Are you sure you're enabling ATYFB video support in your kernel? > That's a common error when folks build their own kernels. > - > To unsubscribe from this list: send the line "unsubscribe sparclinux" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html I was meaning to post on this topic earlier as I hoped it was fixed in more= =20 recent releases, but ATYFB in kernel seems to be broken on my sb100 since=20 somewhere after 2.6.17-rc3.. I have to use a serial console now, haven't done extensive debugging on it,= =20 but now I see the topic mentioned, what is the situation? :) --=20 Regards, Per =D8yvind Karlsen Mandriva