Re: Problems booting 2.6.18 on SunBlade 100/150

[Jason Wever <weeve@gentoo.org>]

[-- Attachment #1: Type: text/plain, Size: 1475 bytes --]

On Wed, 18 Oct 2006 12:31:51 -0700 (PDT)
David Miller <davem@davemloft.net> wrote:

Sorry for the late reply here.

> I fixed these recently, I believe the fix for that is in 2.6.18.1

I tried 2.6.18.1 but the same warnings were still there.  I'll
attempt to pull the git tree for 2.6.18.x and see if I can reproduce
there.

> I'll look into the IRQ problems but the power device registered it's
> IRQ just fine on my SB100 in current 2.6.19-GIT.

Hrm, I pulled the git source this afternoon and still get the same
thing:

ebus0: [flashprom] [eeprom] [idprom]
power: Control reg at 1fe02000800 ... powerd running.
power: Control reg at 1fe02000800 ... powerd running.
IRQ handler type mismatch for IRQ 8
Call Trace:
 [00000000004232f4] power_probe+0xb0/0x100
 [0000000000427628] of_device_probe+0x50/0x70
 [00000000005a5a20] really_probe+0x48/0xf0
 [00000000005a5bd0] __driver_attach+0x44/0x68
 [00000000005a50d4] bus_for_each_dev+0x38/0x6c
 [00000000005a540c] bus_add_driver+0x60/0x190
 [00000000007be7f0] pcibios_init+0x88/0x90
 [0000000000416a44] init+0xa8/0x298
 [0000000000417478] kernel_thread+0x38/0x48
 [0000000000416c4c] rest_init+0x18/0x2c
power: Error, cannot register IRQ handler.

I tried building with both CONFIG_CC_OPTIMIZE_FOR_SIZE enabled and
disabled but it didn't appear to make any difference.  Not sure if it
would matter or not but I'm using OBP 4.17.1 here.

Thanks,
-- 
Jason Wever
Gentoo/Sparc Team Co-Lead

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 189 bytes --]