[PATCH 4/4] PalmZ71 - palmz71 specific

["Marek Vašut" <marek.vasut@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 82 bytes --]

Hi,
this is the rest of the code - palmz71 specific things - board file, lcd etc.

[-- Attachment #2: palmz71-rest.patch --]
[-- Type: text/x-diff, Size: 17405 bytes --]

diff -Naur linux-omap/arch/arm/mach-omap1/board-palmz71.c linux-omap-z71/arch/arm/mach-omap1/board-palmz71.c
--- linux-omap/arch/arm/mach-omap1/board-palmz71.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-omap-z71/arch/arm/mach-omap1/board-palmz71.c	2006-10-20 22:26:21.000000000 +0200
@@ -0,0 +1,371 @@
+/*
+ * linux/arch/arm/mach-omap1/board-palmz71.c
+ *
+ * Modified from board-generic.c
+ *
+ * Support for the Palm Zire71 PDA.
+ *
+ * Original version : Laurent Gonzalez
+ *
+ * Modified for zire71 : Marek Vasut
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/notifier.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/board.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/common.h>
+#include <asm/arch/omap-alsa.h>
+
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+static void __init omap_palmz71_init_irq(void)
+{
+	omap1_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static int palmz71_keymap[] = {
+	KEY(0, 0, KEY_F1),
+	KEY(0, 1, KEY_F2),
+	KEY(0, 2, KEY_F3),
+	KEY(0, 3, KEY_F4),
+	KEY(0, 4, KEY_POWER),
+	KEY(1, 0, KEY_LEFT),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 2, KEY_UP),
+	KEY(1, 3, KEY_RIGHT),
+	KEY(1, 4, KEY_CENTER),
+	KEY(2, 0, KEY_CAMERA),
+        0,
+};
+
+static struct omap_kp_platform_data palmz71_kp_data = {
+	.rows	= 8,
+	.cols	= 8,
+	.keymap = palmz71_keymap,
+	.rep	= 1,
+};
+
+static struct resource palmz71_kp_resources[] = {
+	[0]	= {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device palmz71_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmz71_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(palmz71_kp_resources),
+	.resource	= palmz71_kp_resources,
+};
+
+static struct mtd_partition palmz71_rom_partitions[] = {
+	/* PalmOS "Small ROM", contains the bootloader and the debugger */
+	{
+		.name		= "smallrom",
+		.offset		= 0,
+		.size		= 0xa000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
+	{
+		.name		= "bigrom",
+		.offset		= SZ_128K,
+		/*
+		 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
+		 * 0x7b0000 bytes in the English-only ("enUS") version.
+		 */
+		.size		= 0x7b0000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct flash_platform_data palmz71_rom_data = {
+	.map_name	= "map_rom",
+	.name		= "onboardrom",
+	.width		= 2,
+	.parts		= palmz71_rom_partitions,
+	.nr_parts	= ARRAY_SIZE(palmz71_rom_partitions),
+};
+
+static struct resource palmz71_rom_resource = {
+	.start		= OMAP_CS0_PHYS,
+	.end		= OMAP_CS0_PHYS + SZ_8M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device palmz71_rom_device = {
+	.name		= "omapflash",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmz71_rom_data,
+	},
+	.num_resources	= 1,
+	.resource	= &palmz71_rom_resource,
+};
+
+static struct platform_device palmz71_lcd_device = {
+	.name		= "lcd_palmz71",
+	.id		= -1,
+};
+
+static struct omap_irda_config palmz71_irda_config = {
+	.transceiver_cap	= IR_SIRMODE,
+	.rx_channel		= OMAP_DMA_UART3_RX,
+	.tx_channel		= OMAP_DMA_UART3_TX,
+	.dest_start		= UART3_THR,
+	.src_start		= UART3_RHR,
+	.tx_trigger		= 0,
+	.rx_trigger		= 0,
+};
+
+static struct resource palmz71_irda_resources[] = {
+	[0]	= {
+		.start	= INT_UART3,
+		.end	= INT_UART3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device palmz71_irda_device = {
+	.name		= "omapirda",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmz71_irda_config,
+	},
+	.num_resources	= ARRAY_SIZE(palmz71_irda_resources),
+	.resource	= palmz71_irda_resources,
+};
+
+static struct platform_device palmz71_spi_device = {
+	.name		= "spi_palmz71",
+	.id		= -1,
+};
+
+#define DEFAULT_BITPERSAMPLE 16
+
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+       .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+       .spcr1 = RINTM(3) | RRST,
+       .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+           RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
+       .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+       .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+           XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
+       .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+       .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
+       .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
+       /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
+       .pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+       .name                   = "PalmZ71 AIC23",
+       .mcbsp_regs_alsa        = &mcbsp_regs,
+       .codec_configure_dev    = NULL, // aic23_configure,
+       .codec_set_samplerate   = NULL, // aic23_set_samplerate,
+       .codec_clock_setup      = NULL, // aic23_clock_setup,
+       .codec_clock_on         = NULL, // aic23_clock_on,
+       .codec_clock_off        = NULL, // aic23_clock_off,
+       .get_default_samplerate = NULL, // aic23_get_default_samplerate,
+};
+
+static struct platform_device palmz71_mcbsp1_device = {
+       .name   = "omap_alsa_mcbsp",
+       .id     = 1,
+       .dev = {
+               .platform_data  = &alsa_config,
+       },
+};
+
+static struct omap_backlight_config palmz71_backlight_config = {
+	.default_intensity	= 0xa0,
+};
+
+static struct platform_device palmz71_backlight_device = {
+	.name		= "omap-bl",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmz71_backlight_config,
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&palmz71_rom_device,
+	&palmz71_kp_device,
+	&palmz71_mcbsp1_device,
+	&palmz71_lcd_device,
+	&palmz71_irda_device,
+	&palmz71_spi_device,
+	&palmz71_backlight_device,
+};
+
+static int palmz71_get_pendown_state(void)
+{
+    return !omap_get_gpio_datain(6);
+    }
+    
+static const struct ads7846_platform_data palmz71_ts_info = {
+    .model			= 7846,
+    .vref_delay_usecs		= 100,	/* internal, no capacitor */
+    .x_plate_ohms		= 419,
+    .y_plate_ohms		= 486,
+    .get_pendown_state		= palmz71_get_pendown_state,
+};
+			
+static struct spi_board_info __initdata palmz71_boardinfo[] = { {
+    /* MicroWire (bus 2) CS0 has an ads7846e */
+    .modalias			= "ads7846",
+    .platform_data		= &palmz71_ts_info,
+    .irq			= OMAP_GPIO_IRQ(6),
+    .max_speed_hz		= 120000 /* max sample rate at 3V */
+				    * 26 /* command + data + overhead */,
+    .bus_num			= 2,
+    .chip_select		= 0,
+} };
+									
+static struct omap_usb_config palmz71_usb_config __initdata = {
+	.register_dev	= 1,	/* Mini-B only receptacle */
+	.hmc_mode	= 0,
+	.pins[0]	= 2,
+};
+
+static struct omap_mmc_config palmz71_mmc_config __initdata = {
+	.mmc[0]		= {
+		.enabled 	= 1,
+		.wire4		= 0,
+		.wp_pin		= PALMZ71_MMC_WP_GPIO,
+		.power_pin	= -1,
+		.switch_pin	= PALMZ71_MMC_IN_GPIO,
+	},
+};
+
+static struct omap_lcd_config palmz71_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_uart_config palmz71_uart_config __initdata = {
+	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
+};
+
+static struct omap_board_config_kernel palmz71_config[] = {
+	{ OMAP_TAG_USB,		&palmz71_usb_config },
+	{ OMAP_TAG_MMC,		&palmz71_mmc_config },
+	{ OMAP_TAG_LCD,		&palmz71_lcd_config },
+	{ OMAP_TAG_UART,	&palmz71_uart_config },
+};
+
+static irqreturn_t
+palmz71_powercable(int irq, void *dev_id, struct pt_regs *regs)
+{
+	if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
+		printk(KERN_INFO "PM: Power cable connected\n");
+		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), IRQT_FALLING);
+	} else {
+		printk(KERN_INFO "PM: Power cable disconnected\n");
+		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), IRQT_RISING);
+	}
+	return IRQ_HANDLED;
+}
+
+static void __init omap_mpu_wdt_mode(int mode) {
+	if (mode)
+		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
+	else {
+		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
+		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
+	}
+}
+
+static void __init palmz71_gpio_setup(int early)
+{
+    if (early) {
+	/* Only set GPIO1 so we have a working serial */
+	omap_set_gpio_dataout(1,1);
+	omap_set_gpio_direction(1,0);
+    } else {
+	/* Set MMC/SD host WP pin as input */
+	if (omap_request_gpio(PALMZ71_MMC_WP_GPIO)) {
+		printk(KERN_ERR "Could not reserve WP GPIO!\n");
+		return;
+	}
+	omap_set_gpio_direction(PALMZ71_MMC_WP_GPIO, 1);
+
+	/* Monitor the Power-cable-connected signal */
+	if (omap_request_gpio(PALMZ71_USBDETECT_GPIO)) {
+		printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
+		return;
+	}
+	omap_set_gpio_direction(PALMZ71_USBDETECT_GPIO, 1);
+	if (request_irq(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), palmz71_powercable,
+				SA_SAMPLE_RANDOM, "palmz71-cable", 0))
+		printk(KERN_ERR "IRQ request for power cable failed!\n");
+	palmz71_powercable(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), 0, 0);
+    }
+}
+
+static void __init omap_palmz71_init(void)
+{
+	palmz71_gpio_setup(1);
+	omap_mpu_wdt_mode(0);
+
+	omap_board_config = palmz71_config;
+	omap_board_config_size = ARRAY_SIZE(palmz71_config);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	spi_register_board_info(palmz71_boardinfo,ARRAY_SIZE(palmz71_boardinfo));
+	omap_serial_init();
+	palmz71_gpio_setup(0);
+}
+
+static void __init omap_palmz71_map_io(void)
+{
+	omap1_map_common_io();
+}
+
+MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_palmz71_map_io,
+	.init_irq	= omap_palmz71_init_irq,
+	.init_machine	= omap_palmz71_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff -Naur linux-omap/arch/arm/mach-omap1/Kconfig linux-omap-z71/arch/arm/mach-omap1/Kconfig
--- linux-omap/arch/arm/mach-omap1/Kconfig	2006-10-15 16:09:10.000000000 +0200
+++ linux-omap-z71/arch/arm/mach-omap1/Kconfig	2006-10-20 21:56:49.000000000 +0200
@@ -89,6 +89,15 @@
 	  http://palmtelinux.sourceforge.net/ for more information.
 	  Say Y here if you have this PDA model, say N otherwise.
 
+config MACH_OMAP_PALMZ71
+       bool "Palm Zire71"
+       depends on ARCH_OMAP1 && ARCH_OMAP15XX
+       help
+         Support for the Palm Zire71 PDA. To boot the kernel,
+         you'll need a PalmOS compatible bootloader; check out
+         http://hackndev.com/palm/z71 for more informations.
+         Say Y here if you have such a PDA, say N otherwise.
+
 config MACH_NOKIA770
 	bool "Nokia 770"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
diff -Naur linux-omap/arch/arm/mach-omap1/Makefile linux-omap-z71/arch/arm/mach-omap1/Makefile
--- linux-omap/arch/arm/mach-omap1/Makefile	2006-10-15 16:09:10.000000000 +0200
+++ linux-omap-z71/arch/arm/mach-omap1/Makefile	2006-10-20 21:56:49.000000000 +0200
@@ -25,6 +25,7 @@
 obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o
 obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
 obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
+obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o
 
diff -Naur linux-omap/drivers/video/omap/lcd_palmz71.c linux-omap-z71/drivers/video/omap/lcd_palmz71.c
--- linux-omap/drivers/video/omap/lcd_palmz71.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-omap-z71/drivers/video/omap/lcd_palmz71.c	2006-10-20 22:31:18.000000000 +0200
@@ -0,0 +1,128 @@
+/*
+ * File: drivers/video/omap/lcd_palmz71.c
+ *
+ * LCD panel support for the Palm Zire71
+ *
+ * Original version : Romain Goyet
+ * Current version : Laurent Gonzalez
+ * Modified for zire71 : Marek Vasut
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+//#include <asm/arch/fpga.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/omapfb.h>
+
+/* #define OMAPFB_DBG 1 */
+
+static int palmz71_panel_init(struct omapfb_device *panel)
+{
+	return 0;
+}
+
+static void palmz71_panel_cleanup(void)
+{
+
+}
+
+static int palmz71_panel_enable(void)
+{
+	return 0;
+}
+
+static void palmz71_panel_disable(void)
+{
+}
+
+static unsigned long palmz71_panel_get_caps(void)
+{
+return OMAPFB_CAPS_SET_BACKLIGHT;
+}
+
+struct lcd_panel palmz71_panel = {
+	.name		= "palmz71",
+	.config		= OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
+			  OMAP_LCDC_INV_HSYNC | OMAP_LCDC_HSVS_RISING_EDGE |
+			  OMAP_LCDC_HSVS_OPPOSITE,
+	.data_lines	= 16,
+	.bpp		= 16,
+	.pixel_clock	= 24000,
+	.x_res		= 320,
+	.y_res		= 320,
+	.hsw		= 4,
+	.hfp		= 8,
+	.hbp		= 28,
+	.vsw		= 1,
+	.vfp		= 8,
+	.vbp		= 7,
+	.pcd		= 0,
+
+	.init		= palmz71_panel_init,
+	.cleanup	= palmz71_panel_cleanup,
+	.enable		= palmz71_panel_enable,
+	.disable	= palmz71_panel_disable,
+	.get_caps	= palmz71_panel_get_caps,
+};
+
+static int palmz71_panel_probe(struct platform_device *pdev)
+{
+	omapfb_register_panel(&palmz71_panel);
+	return 0;
+}
+
+static int palmz71_panel_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int palmz71_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+	return 0;
+}
+
+static int palmz71_panel_resume(struct platform_device *pdev)
+{
+	return 0;
+}
+
+struct platform_driver palmz71_panel_driver = {
+	.probe		= palmz71_panel_probe,
+	.remove		= palmz71_panel_remove,
+	.suspend	= palmz71_panel_suspend,
+	.resume		= palmz71_panel_resume,
+	.driver		= {
+		.name	= "lcd_palmz71",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int palmz71_panel_drv_init(void)
+{
+	return platform_driver_register(&palmz71_panel_driver);
+}
+
+static void palmz71_panel_drv_cleanup(void)
+{
+	platform_driver_unregister(&palmz71_panel_driver);
+}
+
+module_init(palmz71_panel_drv_init);
+module_exit(palmz71_panel_drv_cleanup);
diff -Naur linux-omap/drivers/video/omap/Makefile linux-omap-z71/drivers/video/omap/Makefile
--- linux-omap/drivers/video/omap/Makefile	2006-10-15 16:09:33.000000000 +0200
+++ linux-omap-z71/drivers/video/omap/Makefile	2006-10-20 21:56:49.000000000 +0200
@@ -19,6 +19,7 @@
 objs-y$(CONFIG_MACH_OMAP_H3) += lcd_h3.o
 objs-y$(CONFIG_MACH_OMAP_H2) += lcd_h2.o
 objs-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o
+objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
 objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
 objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
 objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
diff -Naur linux-omap/include/asm-arm/arch-omap/board-palmz71.h linux-omap-z71/include/asm-arm/arch-omap/board-palmz71.h
--- linux-omap/include/asm-arm/arch-omap/board-palmz71.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-omap-z71/include/asm-arm/arch-omap/board-palmz71.h	2006-10-20 21:56:49.000000000 +0200
@@ -0,0 +1,26 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-palmz71.h
+ *
+ * Hardware definitions for the Palm Zire71 device.
+ *
+ * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMZ71_H
+#define __OMAP_BOARD_PALMZ71_H
+
+#define PALMZ71_USBDETECT_GPIO	0
+#define PALMZ71_PINTDAV_GPIO	6
+#define PALMZ71_MMC_WP_GPIO	8
+#define PALMZ71_HDQ_GPIO 	11
+
+#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
+#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
+#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
+#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
+
+#endif	/* __OMAP_BOARD_PALMZ71_H */
diff -Naur linux-omap/include/asm-arm/arch-omap/hardware.h linux-omap-z71/include/asm-arm/arch-omap/hardware.h
--- linux-omap/include/asm-arm/arch-omap/hardware.h	2006-10-15 16:09:42.000000000 +0200
+++ linux-omap-z71/include/asm-arm/arch-omap/hardware.h	2006-10-20 21:56:49.000000000 +0200
@@ -334,6 +334,10 @@
 #include "board-palmte.h"
 #endif
 
+#ifdef CONFIG_MACH_OMAP_PALMZ71
+#include "board-palmz71.h"
+#endif
+
 #endif /* !__ASSEMBLER__ */
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */

[-- Attachment #3: Type: text/plain, Size: 0 bytes --]