From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mescal.linbit (office.linbit [213.229.1.138]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.linbit.com (LINBIT Mail Daemon) with ESMTP id C12602CFBDFA for ; Fri, 27 Oct 2006 11:04:27 +0200 (CEST) From: Philipp Reisner To: drbd-dev@lists.linbit.com Subject: Re: [Drbd-dev] DRBD8: The last few changes appears to have broken St state machine. Date: Fri, 27 Oct 2006 11:04:28 +0200 References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Message-Id: <200610271104.28514.philipp.reisner@linbit.com> List-Id: Coordination of development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Am Mittwoch, 25. Oktober 2006 21:33 schrieb Montrose, Ernest: > Hi all: > I am using the same configuration I have always used. With the latest > changes (I would say a couple of days worth but don't quote me). > A look at /proc/drbd on Node 1 yields: > St: Secondary/Primary > A look at /proc/drbd on Node 2 yields: > St: Secondary/Secondary <----- Which is not true. > > I go on node 2 and try to set it to Primary, since node 1 thinks it is > anyway: > # drbdadm primary shared.fs > **Thinks about it for a few*** then get: > No response from the DRBD driver! Is the module loaded? > Error code 102200106 unknown. > You should update the drbd userland tools. > Command 'drbdsetup /dev/drbd15 primary' teminated with exit code 20 > Drbdadm aborting. > > Puts in older driver, reboot and all is fine now.... > Oops! Just fixed in SVN.=20 =2DPhil =2D-=20 : Dipl-Ing Philipp Reisner Tel +43-1-8178292-50 : : LINBIT Information Technologies GmbH Fax +43-1-8178292-82 : : Sch=F6nbrunnerstr 244, 1120 Vienna, Austria http://www.linbit.com :