From: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
To: Stephen Hemminger <shemminger@osdl.org>
Cc: netdev@vger.kernel.org
Subject: sky2 hang.
Date: Tue, 31 Oct 2006 09:11:44 +0300 [thread overview]
Message-ID: <20061031061144.GA1562@2ka.mipt.ru> (raw)
sky2 from debian etch kernel (2.6.17-2) has stopped today after quite
big amount of traffic transferred (30MB/sec for about 3-4 hours).
rmmod/insmod does not help, reboot required.
Here is dmesg output:
Oct 31 06:40:07 kano kernel: NETDEV WATCHDOG: eth0: transmit timed out
Oct 31 06:40:07 kano kernel: sky2 eth0: tx timeout
Oct 31 06:40:07 kano kernel: sky2 eth0: transmit ring 198 .. 175 report=221 done=221
Oct 31 06:40:07 kano kernel: sky2 status report lost?
Oct 31 06:40:42 kano kernel: NETDEV WATCHDOG: eth0: transmit timed out
Oct 31 06:40:42 kano kernel: sky2 eth0: tx timeout
Oct 31 06:40:42 kano kernel: sky2 eth0: transmit ring 221 .. 198 report=221 done=221
Oct 31 06:40:42 kano kernel: sky2 hardware hung? flushing
Oct 31 06:54:07 kano kernel: NETDEV WATCHDOG: eth0: transmit timed out
Oct 31 06:54:07 kano kernel: sky2 eth0: tx timeout
Oct 31 06:54:07 kano kernel: sky2 eth0: transmit ring 198 .. 175 report=221 done=221
Oct 31 06:54:07 kano kernel: sky2 status report lost?
Oct 31 06:54:42 kano kernel: NETDEV WATCHDOG: eth0: transmit timed out
Oct 31 06:54:42 kano kernel: sky2 eth0: tx timeout
Oct 31 06:54:42 kano kernel: sky2 eth0: transmit ring 221 .. 198 report=221 done=221
Oct 31 06:54:42 kano kernel: sky2 hardware hung? flushing
And here is rmmod/insmod dmesg:
Oct 31 08:58:19 kano kernel: sky2 eth0: disabling interface
Oct 31 08:59:00 kano kernel: ACPI: PCI interrupt for device 0000:05:00.0 disabled
Oct 31 08:59:21 kano kernel: ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKD] -> GSI 18 (level, low) -> IRQ 98
Oct 31 08:59:21 kano kernel: PCI: Setting latency timer of device 0000:05:00.0 to 64
Oct 31 08:59:21 kano kernel: sky2 v1.6.1 addr 0xfbefc000 irq 98 Yukon-EC (0xb6) rev 2
Oct 31 08:59:21 kano kernel: sky2 eth0: addr 00:17:31:9a:e5:be
Oct 31 08:59:21 kano kernel: sky2 eth0: enabling interface
Oct 31 08:59:21 kano kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 31 08:59:23 kano kernel: sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
Oct 31 08:59:23 kano kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
--
Evgeniy Polyakov
next reply other threads:[~2006-10-31 6:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-31 6:11 Evgeniy Polyakov [this message]
2006-10-31 6:24 ` sky2 hang Stephen Hemminger
2006-10-31 7:04 ` Evgeniy Polyakov
2006-10-31 7:08 ` Alexander Wirt
2006-10-31 7:33 ` Evgeniy Polyakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061031061144.GA1562@2ka.mipt.ru \
--to=johnpol@2ka.mipt.ru \
--cc=netdev@vger.kernel.org \
--cc=shemminger@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.